Three-Dimensional Stress Fields in Finite Thickness Plate with Hole Under Shear Load

The theoretical solutions are obtained for the three-dimensional(3-D)stress field in an infinite isotropic elastic plate with a through-the-thickness circular hole subjected to shear load at far field by using Kane and Mindlin′s assumption based on the stress function method.Based on the present solutions,the characteristics of 3-D stress field are analyzed and the emphasis is placed on the effects of the plate thickness and Poisson′s ratio on the deviation of the present 3-D in-plane stress from the related plane stress solutions,the stress concentration and the out-of-plane constraint.The present solutions show that the stress concentration factor reaches its peak value of about 8.9% which is higher than that of the plane stress solutions.As expected,the out-of-plane stress constraint factor can reach 1on the surface of the hole when the plate is a very thick one.     

黏附激励下空间目标惯性参数的辨识方法

针对黏附卫星会自然激励目标改变运动状态的现象，提出一种利用黏附激励进行空间非合作目标惯性参数的辨识方法。黏附前，利用主星对目标特征点的视觉测量，建立估计目标惯性参数与相对运动参数的滤波器，并估计目标的转动惯量比和质心；黏附后，主星直接利用该滤波器估计目标的新的质心速度，并基于动量守恒原理计算目标质量。该方法不仅充分利用黏附过程的自然激励，无需常规辨识必须的主动激励，而且激励前后算法一致，无需切换。数字仿真证实了算法的有效性。     

Trajectory Planning Algorithm Based on Quaternion for 6-DOF Aircraft Wing Automatic Position and Pose Adjustment Method

 A 6-degree of freedom (6-DOF) aircraft wing position and pose automatic adjustment method is presented to improve ARJ21 wing-fuselage connection precision and efficiency. Wing position and pose are adjusted by three pillars which are driven by six high-precision servo motors. During the adjustment process, wing is tracked and positioned by laser tracker. Wing initial posi-tion and pose are calibrated by using the measurement coordinates of assembly reference points. Wing target position and pose are calculated according to wing initial, fuselage position and pose, and relative position and pose requirements between wing and fuselage for the connection. Combining Newton-Euler method with quaternion position and pose analyzing method, the inverse kinematics of servo motors, together with the adjustment system dynamics is obtained. Wing quintic polynomial trajec-tory planning algorithm based on quaternion is proposed; the initial, target position and pose need to be solved and the inter-mediate moving path is uncertain. Simulation results show that the adjustment method has good dynamic characteristics and satisfies engineering requirements. Preliminary engineering application indicates that ARJ21 wing adjustment efficiency and precision are improved by using the proposed method.     

月球轨道器模块化综合电子设计与实现

以嫦娥五号轨道器为背景,介绍了可重构模块化综合电子方案的设计。从综合电子功能需求分析入手、结合轨道器构型,搭建了综合电子系统体系架构。运用模块化的思路,规划了轨道器综合电子的基本功能模块类型,介绍了内总线的通用化设计,给出了单机的具体配置,并在此基础上进行了综合电子信息流设计。在计算机技术方面,重点介绍了既可以工作于热备份模式,又可以工作于冷备份模式的可重构设计。     

圆柱贮箱内液体非线性稳态晃动实验及动力学特性分析

针对圆柱贮箱内液体非线性稳态晃动力和力矩动态信号的采集与分析问题,设计了一种能同时实现充液贮箱整体固定安装和液体动态晃动力、力矩精确测量的实验装置,给出了相应的实验数据采集、分析和处理方法。通过开展大量实验,将实验数据与CFD仿真结果进行细致对比后发现:在旋转晃动状态下,CFD仿真结果存在明显的计算偏差,不便被独立的用于完整揭示贮箱内液体晃动的真实特性。最后,归纳了贮箱内液体的非线性稳态晃动行为随横向外激励频率的变化规律,并对比分析了驻波晃动、拍振晃动、多类复杂的旋转晃动等多种不同形式的非线性稳态晃动行为对运载工具控制系统的任务执行效率和稳定性的影响。     

某型飞机前风挡有机玻璃裂纹故障分析和换装

通过失效分析和生产过程调查,找出了某型号飞机侧窗有机玻璃透明件裂纹源,发现其应力-溶剂裂纹为在应力和溶剂共同作用下产生,确定了零件的关键工艺改进和防错措施.同时,还通过工艺试验和工装模具与可调节退火架的设计,确定了前风挡有机玻璃换装件各道工序的换装方案,并完成了换装.     

低温动态准双轴拉伸加载下HTPB推进剂的热老化性能

为分析热老化后三组元端羟基聚丁二烯(HTPB)推进剂在低温动态准双轴加载下的性能，开展了不同热加速老化时间、不同温度和应变率条件下推进剂的准双轴拉伸力学性能试验及扫描电镜(SEM)观察试验。试验结果表明：热加速老化前后，推进剂的拉伸曲线趋势、力学性能变化规律及细观损伤形式保持一致，改进型非线性模型能够更好地描述1~100 s -1 应变率范围内典型力学性能参数随热老化时间的非线性变化关系。随温度降低，老化后推进剂的断面形貌由“脱湿”变为AP颗粒断裂，热老化、低温以及高应变率载荷的叠加使得推进剂的细观损伤变得更加严重，但准双轴拉伸时损伤程度相比单轴拉伸时有所减弱。热老化32 d、74 d和98 d后-50 ℃、 14.29 s -1 加载条件下的最大伸长率分别为未老化时室温、0.40 s -1 条件下数值的28.79%、27.58%和25.63%，该参数定义可为分析长期贮存后战术导弹SRM药柱在低温点火条件下结构完整性失效的准则提供数据支持。     

GAP/CL-20高能推进剂燃烧性能调节研究

采用水下声发射法测试了聚叠氮缩水甘油醚(GAP)/六硝基六氮杂异伍兹烷(CL-20)高能推进剂燃速,使用最小二乘法计算燃速压强指数,开展了GAP/CL-20高能推进剂燃烧性能调节研究.结果表明,减小CL-20粒度、增大AP粒度、使用增塑剂Bu-NENA(丁基硝氧乙基硝胺)部分取代硝酸酯增塑剂等途径,均可降低GAP/CL...