涡轮叶片表面气膜冷却效率的实验研究

采用放大的叶片模型，利用大尺寸低速线性叶栅风洞进行实验，测量了涡轮导向叶片表面不同位置单排气膜孔的气膜冷却效率，研究了孔排位置、吹风比及来流雷诺数的影响。风洞实验段由3个叶片组成，其中中间的叶片为试验叶片，由优质木材制成。试验叶片表面上开有15排气膜孔，其中吸力面3排，前缘区6排，压力面6排。实验的参数变化范围是：基于叶片弦长的来流雷诺数250000-450000，吹风比0．5-2．5。结果表明，由于气膜孔排位置的不同，其下游冷却效率受来流雷诺数及吹风比影响的变化趋势也有所不同。     

桩后压浆灌注桩的技术分析

对桩后压浆灌注柱的工作原理、施工工艺及控制参数进行了分析，并提出了该技术的适用条件及技术优势。     

空气中微细电火花沉积铜合金工艺方法

提出了一种在空气中将工具电极丝黄铜材料沉积到工件上的新工艺方法。实现该方法的基本条件为:(1)工具电极接脉冲电源正极;(2)在空气中放电;(3)窄脉宽配合宽脉间。通过大量实验对微细电火花沉积加工的工艺规律进行了系统深入的研究,得出各主要工艺参数对沉积工艺效果的影响规律。最终以黄铜电极丝为工具电极,在高速钢工件表面上沉积出直径为0.19 mm、高度为7.35 mm的微小圆柱体。利用SEM、能谱分析和X射线衍射及显微硬度测试等方法对沉积物进行分析,得出该沉积物的组织结构、化学成分和硬度等方面的基本性质,为进一步研究三维沉积加工奠定了基础。     

钛合金胶接点焊接头的性能检测

研究了不同焊接电流下钛合金板胶接点焊接头的A扫描信号和C扫描图像特征,并进行了拉伸-剪切试验。结果表明:通过观察C扫描图像的特征与A扫描信号的变化,能够划分胶接点焊接头的胶层区、热影响区、熔合区、熔核区以及焊接缺陷;随着电流(7~10 k A)的逐渐增大,接头熔核直径呈递增趋势,相应的失效载荷从7 231.5增加到10 939.0 N;当电流为7 k A时,在C扫描图像上反映出飞溅缺陷,此时接头失效载荷远小于没有出现飞溅的接头,可见飞溅降低了胶接点焊接头的拉剪载荷。     

新媒体视域下系统构建“三位一体”公寓管理模式

随着科技日益进步和5G时代的即将到来,在治理体系上越来越注重管理与哲学教育相结合,高校作为接收新事物、新思维的前沿阵地。学生公寓成为大学生思想政治教育的又一个重要的阵地,因此创新公寓管理体系并努力做到使之与哲学相结合也成为了一项重大任务,高校辅导员、公寓辅导员、高校后勤管理人员结合新媒体创新学生公寓的管理方式对新时代大学生的教育、管理、服务掌控和开展思想政治教育工作至关重要。     

A comprehensive study of the 2016 Mw 6.0 Italy earthquake based on high-rate (10 Hz) GPS data

The 2016 M_w 6.0 Italy earthquake is successfully recorded by the near-field 10?Hz GPS and 200?Hz Strong Motion (SM) stations, providing valuable data for this study. A comprehensive study of this earthquake is carried out based on GPS data, which contains coseismic deformations analysis, noise analysis, seismic wave picking, and magnitude determination. The noise of most GPS-derived displacement waveforms can be described as a combination of white noise, flicker noise, and random walk noise after the earthquake occurrence, and the spectral indices vary significantly for most stations, implying that the seismic signals have affected the noise characteristic of GPS-derived displacement waveforms. S-transform is employed to assess the GPS capability to detect the seismic arrival time. The SM station AMT and the GPS station AMAT are in good agreement in seismic wave picking, and the difference is only 1.2?s in the north component, suggesting that the outcome of seismic wave picking using GPS data is reliable. Then, a classic empirical formula is employed to determine the moment magnitude. A robust moment magnitude (Mw 5.90) can be estimated by the nine GPS stations with about 23.9?s. If four GPS stations near the epicenter is chosen to determine the magnitude, it only take 13.0?s to retrieve a reliable preliminary (Mw 5.82) magnitude, which is 5.4?s ahead of nine stations. In addition, Cross Wavelet Transform (XWT) is adopted to measuring the correlation and phase relationship between GPS and SM records. The result of XWT analysis indicates 10?Hz GPS is capable of capturing reliable and accurate coseismic dynamic deformations, as evidenced by the XWT-based semblance being close to 1 between GPS and SM records. The above results confirm the capability of 10?Hz GPS to capture coseismic dynamic deformations, detect seismic arrival time, and determine earthquake magnitude. Moreover, rapid magnitude determination based on 10?Hz GPS data can be regarded as an important supplement to Earthquake Early Warning (EEW).     

A surface parametric control and global optimization method for axial flow compressor blades

An aerodynamic optimization method for axial flow compressor blades available for engineering is developed in this paper. Bezier surface is adopted as parameterization method to control the suction surface of the blades, which brings the following advantages:(A) significantly reducing design variables;(B) easy to ensure the mechanical strength of rotating blades;(C) better physical understanding;(D) easy to achieve smooth surface. The Improved Artificial Bee Colony(IABC) algorithm, which significantly increases the convergence speed and global optimization ability, is adopted to find the optimal result. A new engineering optimization tool is constructed by combining the surface parametric control method, the IABC algorithm, with a verified Computational Fluid Dynamics(CFD) simulation method, and it has been successfully applied in the aerodynamic optimization for a single-row transonic rotor(Rotor 37) and a single-stage transonic axialflow compressor(Stage 35). With the constraint that the relative change in the flow rate is less than0.5% and the total pressure ratio does not decrease, within the acceptable time in engineering, the adiabatic efficiency of Rotor 37 at design point increases by 1.02%, while its surge margin 0.84%,and the adiabatic efficiency of Stage 35 0.54%, while its surge margin 1.11% after optimization, to verify the effectiveness and potential in engineering of this new tool for optimization of axial compressor blade.     

DE历表的结构、计算与比较

在详细介绍美国JPL(Jet Propulsion Laboratory,喷气推进实验室)发布的DE (Development Ephemerides,行星/月球展开历表)系列历表的基本情况、头文件和数据文件的结构、历表计算原理等内容的基础上,以DE405、DE421、DE431为例,分别计算了1900-2200年间月球、太阳、行星等天体在地心天球参考系中的坐标及速度,并由此得到3个历表间的差异,结果表明DE431与DE421之间的差异,整体而言要小于二者同DE405之间的差异.最后以引潮力的计算为例,表明历袁更新对于引潮力的影响基本可忽略不计,验证了IERS(International Earth Rotation and reference systems Service,国际地球自转与参考系服务)规范中关于历表更新对相关地球科学影响十分有限的结论.