超高强度钢30CrMnSiNi2A的氢脆敏感性试验

采用延迟破坏、测氢含量、扫描电镜分析及冲击拉伸试验等方法,研究了超高强度钢30CrMnSiNi2A的氢脆敏感性。试验结果表明,30CrMnSiNi2A钢在甲醇或丙酮裂解气氛中保护加热油淬有明显氢脆现象,但只要及时回火,氢脆基本消除,性能达到合格。试验结果为生产提供了实验依据。     

金属薄板超声无损检测

介绍了金属薄板的缺陷类型，建立了超声喷水穿透C扫描系统和检测方法。检测试验结果表明：采用建立的系统和方法能够检测出厚度≤6mm金属薄板中的分层性缺陷。     

复合材料锥壳0°铺层的自动铺放成型方法研究

研究了一种基于自动铺带技术的复合材料锥壳0°铺层成型方法:根据锥壳构件尺寸将等宽预浸带数控分切成预定尺寸的直角梯形预浸带片,按特定方式铺放到锥壳表面并使每两片拼成一个等腰梯形单元,多个等腰梯单元形构成锥壳的0°铺层;并针对这种成型方法设计了一种实现锥壳0°铺层自动成型的装置.采用该方法及其设备可以实现锥壳0°铺层的自动化制造,提高成型效率、降低废料率、稳定工艺质量,降低装备制造成本.     

民机的一种新型布局形式——翼身融合体飞机

 讨论了一种区别于机翼与圆柱机身的传统民机外形——翼身融合体（BWB）外形。从给定容积下减少浸润面积和摩擦阻力的考虑发展出了翼身融合体的概念。在满足系列设计约束条件下讨论了适于大型（800座）客机的翼身融合体的技术和商业上的可能性。概念设计研究表明,翼身融合体外形可获得比常规外形更好的性能。巡航升阻比可从传统外形的19提高至23。480座的BWB外形与同量级的传统外形（A380-700）相比,最大起飞重量可减少18%,每座位燃油消耗可减少32%,具有良好的环保性。通过气动载荷分布规律的反设计,翼型修型和三维优化设计等气动设计方法可以有效减阻和提高BWB的气动性能。由于BWB的高度融合性,讨论了多学科优化设计方法的重要性和有效性。BWB概念能够发展成BWB系列机,进一步提高巡航马赫数也是可能的。     

数控加工钨渗铜材料工件的工艺参数选用

针对钨渗铜材料切削性能差,在数控切削加工过程中易产生裂纹、崩料、变形等质量缺陷,从刀具、切削参数、切削液选用及走刀路线的安排等方面综合考虑,提出了解决问题的工艺方法。     

Effect of sodium tartrate concentrations on morphology and characteristics of anodic oxide film on titanium alloy Ti–10V–2Fe–3Al

The effect of sodium tartrate concentrations on morphology and characteristics of ano-dic oxide film on titanium alloy was investigated. The alloy substrates were anodized in different concentration solutions of sodium tartrate with the addition of PTFE emulsion and their morphol-ogy and characteristics were analyzed. The anodic oxide film presented a uniform petaloid drums and micro-cracks morphology. Additionally, micro-cracks dramatically swelled with the increase of the tartrate concentrations. The thickness of the anodic oxide film increased with the concentra-tions until the concentration reached 15 g/L. The results of Raman analysis illustrate that all sam-ples have similarity in the crystal structure, consisting of mainly amorphous TiO2, some anatase TiO2 and a small amount of rutile TiO2. And the ratios of anatase TiO2 and rutile TiO2 increase with the concentrations until it reaches 15 g/L. Furthermore, the intensity of the peaks increases with enhanced concentrations until the concentration reaches 15 g/L. The corrosion resistance of the anodic oxide film is increased by the sodium tartrate with higher concentrations before 15 g/L. The coefficient of friction of the anodic oxide film reduces with the concentrations until the concentration reaches 15 g/L, then the coefficient of friction of the anodic oxide film increases with the concentrations.     

冲击射流的彩虹纹影实验研究

超声速冲击射流在短距、垂直起降飞行器（S/VTOL）以及火箭发射等方面应用广泛,但是伴随着流场与噪声等诸多方面的问题。要研究这一类问题,必先研究这一类超声速流动的波系结构。文章利用彩虹纹影测量系统,对不同距离不同压比的冲击射流进行实验研究,得到了清晰的彩虹纹影实验结果,细致地呈现了冲击射流的波系结构。基于实验结果,对三种不同结构的冲击射流的波系结构进行了详细分析。发现喷嘴与挡板距离较大时,形成的射流结构与自由射流相似,壁面附近的射流区域不明显。随着距离减小,冲击射流出现壁面冲击区附近射流比较剧烈的现象。距离进一步减小时,出现滞止泡等结构,滞止泡的形状与压比相关。此外,实验表明冲击射流形成的马赫盘大小、形状与来流压比相关。     

Identification method for helicopter flight dynamics modeling with rotor degrees of freedom

A comprehensive method based on system identification theory for helicopter flight dynamics modeling with rotor degrees of freedom is developed. A fully parameterized rotor flapping equation for identification purpose is derived without using any theoretical model, so the confidence of the identified model is increased, and then the 6 degrees of freedom rigid body model is extended to 9 degrees of freedom high-order model. Bode sensitivity function is derived to increase the accuracy of frequency spectra calculation which influences the accuracy of model parameter identification. Then a frequency domain identification algorithm is established. Acceleration technique is developed furthermore to increase calculation efficiency, and the total identification time is reduced by more than 50% using this technique. A comprehensive two-step method is established for helicopter high-order flight dynamics model identification which increases the numerical stability of model identification compared with single step algorithm. Application of the developed method to identify the flight dynamics model of BO 105 helicopter based on flight test data is implemented. A comparative study between the high-order model and rigid body model is performed at last. The results show that the developed method can be used for helicopter high-order flight dynamics model identification with high accuracy as well as efficiency, and the advantage of identified high-order model is very obvious compared with low-order model.     

航空发动机推力测量台架原理误差分析

为研究影响航空发动机推力测量台架系统原理误差的因素及作用,针对发动机弹簧片支撑式推力测量台架,以推力偏心假设为基础建立其力学模型,采用理论分析和仿真验证相结合的方法对某试车台架进行原理误差分析.在给定条件下,台架在竖直平面和水平面内的角偏心远小于推力角偏心,并不会对推力测量造成显著影响,台架结构变形引起的角偏心也很小.相比之下,原理误差影响最大的因素依次为推力角偏心、热变形和弹阻力,原理误差分别为0.38％、0.16％和0.04％,应加以控制.当推力偏心量造成的原理误差不能满足精度指标时,需采用原位加载系统或者矢量推力测量台架来评估.     

主燃级喷嘴和燃油分级后雾化特性实验研究(“两机”专刊)

为优化高温升主燃烧室燃烧性能,对三级旋流主燃烧室开展雾化特性试验研究。预燃级喷嘴采用离心喷嘴压力雾化和气动雾化相结合,主燃级采用预膜式气动雾化。试验采用相位多普勒粒子分析仪对主预燃级喷嘴和燃油分级后的雾化特性进行研究,对比分析了不同头部压降和燃油流量在不同轴向截面和径向位置的液滴粒径分布,并利用高速摄像对不同工况下的喷雾形态进行了记录。试验结果表明：主燃级油雾粒径为50~80μm,气液比达到3.5即可达到良好的雾化水平。随着轴向距离延长,喷雾粒径变大,喷雾浓度变得均匀。燃油分级比增加可降低整体粒径约10μm,且主要影响中心区域,对雾锥外侧粒径影响不大。