Relationship Between Corrosion Level of Steel Bar and Diameter of Corroded Sensing Steel Wire in Wireless Sensor

A kind of wireless sensor was previously developed,which is powered and transmit signals wirelessly instead of using an electrical connection to the embedded reinforcement.Based on this technique,the relationship between diameters of corroded sensing steel wires and corrosion levels of steel bars is established by experiments.Quadratic function is utilized to fit the experiment results,and the correlation coefficients are all larger than 0.95.Estimated corrosion levels of commonly used steel bars are given for different diameters of corroded sensing steel wires fractured due to corrosion.     

惯性器件结构设计与材料选用的规范化

概述惯性器件结构设计原则,分析材料选择及其工艺性、使用性、经济性与安全性的特点,从签署责任制方面阐述惯性器件设计文件会签中应注意的问题.     

CDMA伪码序列产生及抗干扰性能分析

为解决码分多址（CDMA）的抗多址干扰性能要求,引出了CDMA系统在最大长度序列、哥德尔序列的一些基本概念和它们的生成方式,并用Matlab实现了生成序列的算法,然后对这些序列的循环自、互相关特性进行了计算机仿真分析,得到了预期的其有良好互相关特性的结果,得出了该类序列具有优良的抗多址干扰性能的结论。     

大客机项目航空电子解决方案分析

大客机对中国的航空航天业是一个非常重要的项目.大客机项目所研制的飞机必须高效且有市场竞争力.而航空电子系统作为飞机系统的重要组成部分,必须为飞机的设计理念提供支持.     

分区并行跨声速流的计算

本文采用求解Ｎ－Ｓ方程方法计算了轴对称钝头倒锥体外形的跨声速大迎角层流流动。     

大型飞机机载设备及关键技术分析

机载设备已成为飞机实现新飞行功能、完成新任务的主要保证.机载设备是飞机的耳目、大脑和神经,可以说是飞机先进程度的一个重要标志,没有先进的机载设备就没有先进的飞机.其相关的关键技术也起着重大的作用.     

三维技术在模线样板设计中的使用

介绍三维技术在模线样板设计中的使用方法。包括平面组合件、单双曲度零件的模线样板设计中有关数据和图形的取制以及有关角度的计算过程，并通过几个典型实例详细描述了三维技术应用于模线设计的有关技巧。     

热处理真空淬火工艺的应用

超高强度钢在普通空气炉和盐炉中热处理后，零件表面氧化脱碳相对比较厚，再返回机加车间精加工，其高强度给机加带来不便。通过改进热处理工艺，采用保护气氛炉或真空炉淬火，在满足机械性能要求的前提下，实现少、无氧化热处理。     

大型工程装备可拓制造模型研究

在大型工程装备快速变批量生产需求环境下,基于可拓协同制造资源概念,提出了装备可拓制造"超网络"链制造模式,研究了可拓制造能力单元的RKCQ流模型,构建了可拓制造"超网络"链的参考模型与组建过程模型,并指出使能技术框架体系,可拓制造"超网络"链模式提出的目的在于为大型工程装备制造系统应对不确定性的需求提供制造能力储备.     

Simulation study on slant-to-vertical deviation in two dimensional TEC mapping over the ionosphere equatorial anomaly

With the rapid increase of GPS/GNSS receivers being deployed and operated in China, real-time GPS data from nearly a thousand sites are available at the National Center for Space Weather, China Meteorology Administration. However, it is challenging to generate a high-quality regional total electron content (TEC) map with the traditional two-dimensional (2-D) retrieval scheme because a large horizontal gradient has been reported over east–south Asia due to the northern equatorial ionization anomaly. We developed an Ionosphere Data Assimilation Analysis System (IDAAS), which is described in this study, using an International Reference Ionosphere (IRI) model as the background and applying a Kalman filter for updated observations. The IDAAS can reconstruct a three-dimensional ionosphere with the GPS slant TEC. The inverse slant TEC correlates well with observations both for GPS sites involved in the reconstruction and sites that are not involved. Based on the IDAAS, simulations were performed to investigate the deviation relative to the slant-to-vertical conversion (STV). The results indicate that the relative deviation induced by slant-to-vertical conversion may be significant in certain instances, and the deviation varies from 0% to 40% when the elevation decreases from 90° to 15°, while the relative IDAAS deviation is much smaller and varies from −5% to 15% without an elevation dependence. Compared with ‘true TEC’ map derived from the model, there is large difference in STV TEC map but no obvious discrepancy in IDAAS map. Generally, the IDAAS TEC map is much closer to the “true TEC” than is STV TEC map is.