Ti-24A1-17 Nb合金的激光焊接

研究了Ti-24Al-17Nb合金的激光焊接及其接头的力学性能.研究结果表明,连续激光氦气双面保护可以获得保护效果可靠、无缺陷、成型良好的焊接接头.焊接热输入增大不利于接头的纵向弯曲塑性,而接头的横向拉伸强度与母材基本相同,塑性可以接近母材的塑性,达到14%～17%.     

Identification method for helicopter flight dynamics modeling with rotor degrees of freedom

A comprehensive method based on system identification theory for helicopter flight dynamics modeling with rotor degrees of freedom is developed. A fully parameterized rotor flapping equation for identification purpose is derived without using any theoretical model, so the confidence of the identified model is increased, and then the 6 degrees of freedom rigid body model is extended to 9 degrees of freedom high-order model. Bode sensitivity function is derived to increase the accuracy of frequency spectra calculation which influences the accuracy of model parameter identification. Then a frequency domain identification algorithm is established. Acceleration technique is developed furthermore to increase calculation efficiency, and the total identification time is reduced by more than 50% using this technique. A comprehensive two-step method is established for helicopter high-order flight dynamics model identification which increases the numerical stability of model identification compared with single step algorithm. Application of the developed method to identify the flight dynamics model of BO 105 helicopter based on flight test data is implemented. A comparative study between the high-order model and rigid body model is performed at last. The results show that the developed method can be used for helicopter high-order flight dynamics model identification with high accuracy as well as efficiency, and the advantage of identified high-order model is very obvious compared with low-order model.     

基于左手材料的翼面隐身结构设计及优化

翼面隐身结构能同时满足飞行器机翼气动、结构和隐身的要求,但在空间有限的机翼中应用时,由于结构特点使其隐身效果受到限制。为了解决该问题,在传统隐身结构中加入左手材料(LHM)进行改进。首先选取一种典型的LHM,从隐身设计角度出发,利用其雷达散射截面(RCS)计算不同入射角度下的后向吸收率,对其电磁特性进行研究。然后根据LHM的电磁特性,将其应用于翼面隐身结构,在相同的RCS减缩效果下,应用LHM可有效降低隐身结构体积。最后,为了进一步提高隐身效果,提出一种夹芯型LHM翼面隐身结构,并对该隐身结构中的结构参数利用代理模型进行优化。研究结果表明,相较金属翼面段RCS降低了15dB以上,较相同结构的翼面隐身结构RCS降低了10dB以上。     

Accuracy enhancement of the spherical actuator with a two-level geometric calibration method

This paper presents a two-level geometric calibration method for the permanent magnet （PM） spherical actuator to improve its motion control accuracy. The proposed actuator is com- posed of a stator with circumferential coils and a rotor with multiple PM poles. Due to the assembly and fabrication errors, the real geometric parameters of the actuator will deviate from their design values. Hence, the identification of such errors is critical for the motion control tasks. A two-level geometric calibration approach is proposed to identify such errors. In the first level, the calibration model is formulated based on the differential form of the kinematic equation, which is to identify the geometric errors in the spherical joint. In the second level, the calibration model is formulated based on the differential form of torque formula, which is to calibrate the geometric parameters of the magnetization axes of PM poles and coils axes. To demonstrate the robustness and availability of the calibration algorithm, simulations are conducted. The results have shown that the proposed two-level calibration method can effectively compensate the geometric parameter errors and improve the positioning accuracy of the spherical actuator.     

基于磨粒分析方法的发动机磨损故障智能诊断技术

磨粒是研究磨损状态时最直接、最重要的信息元，通过对滑油中的磨粒进行监测与分析来判断机械设备的磨损情况，可以预防并监测机械设备的磨损故障。本文运用显微形态学方法建立了一套磨粒显微特征描述体系，以提取磨粒信息并进行磨损故障的模式识别；并结合摩擦学理论和人工智能方法，实现对发动机磨损故障的智能诊断和预测。     

提高电铸局部电沉积速率试验研究

电铸成型是采用离子沉积的方法制造复制件，具有很好的复制精度，因此电铸技术得到了广泛的应用。但由于受极限电流密度等多方面因素的影响，电铸速率一直是制约电铸技术发展的一个瓶颈，许多学者为此做了大量的理论和试验研究，但对如何提高极限电流密度还没有提供一个比较满意的答案，为提高电铸局部电沉积速率，本文在前人工作的基础上，讨论了影响电铸速率的因素，提出了一种新型的电铸方法－喷射式电铸，并通过两组试验分析了局部电沉积速率怀电铸液流量的关系以及局部铸速率与喷嘴口径的关系，试验结果表明，采用喷射式电铸可以大大提高局部极限电流密度，从而使电铸局部电沉积速率有一个较大范围的提高，为将电铸与快速成型结合奠定了试验基础。     

三角机翼过失速非定常空气动力特性研究

在３ｍ低速风洞中研究了７０°后掠角三角翼过失速气动特性。实验中使用了专门设计的液压动态实验台，它可以模拟迎角的变化规律以便研究角速度，迎角变化历程对空气动力特性的影响。实验中迎角范围０°－９０°。使用六分力应变天测量非定常空气动力。研究指出：当作大迎角纵向过失速机动时，其空气动力有很大超调量和呈现滞回线特征，它们随着减缩频率增大而增大。特别是力矩特低迎角（α＞３０°）具有阻尼特征，但在高迎角时（３     

新亚欧大陆桥的态势分析及其对江苏经济发展的作用

介绍了新亚欧大陆桥的概况，分析了它的态势，认为它的美好前景少则二三年多则三五年即可实现。它为江苏经济发展提供了新的机遇。例如改善了江苏省发展外向型经济的地理区位条件，提供了西向中亚、西亚和欧洲进出口的唯一陆上通道，加强了江苏与我国中、西部地区的经济联系与合作；特别是；连沂徐经济带将因大陆桥而迅速崛起，它是加快苏北发展的契机，东方桥头堡连云港将发挥龙头作用。本文呼吁抓住契机，提出了若干建议。