Aperture error mitigation via local-state estimation for frequency-based emitter location

This paper considers the problem of locating a stationary coherent emitter via a single moving platform making frequency measurements in the presence of aperture state uncertainty. It is shown that the estimated emitter location is most sensitive to the receiving aperture velocity uncertainty. The required aperture velocity accuracy is determined through a noninfinitesimal perturbation analysis. A solution to location accuracy enhancement with a minimal hardware addition is attempted. It is shown that this can be achieved by mounting a high-resolution tri-axis microelectromechanical systems (MEMS) accelerometer at the aperture to measure its velocity, which can deviate significantly from that estimated by the on-board navigation system. The Doppler shifts of the GPS signal carrier frequency, whenever it can be acquired through the aperture, are also considered as a way to aid the aperture velocity measurement. A decentralized, federated processing method for the aperture velocity estimate referenced at the aperture, integrating all measurement data, is presented. An upper bound for the error of aperture velocity estimate is derived. The potential for significant accuracy enhancement for emitter location is demonstrated.     

毕棚沟 一路走过

梦是对无限、永远的可能的相信，而现实并不……黑、白棋总是在棋盘上腾转挪移，而黑、白并不……[编者按]     

侧链含硝基氮杂基团的聚醚粘合剂的性能及应用──新型硝基粘合剂研究Ⅲ

对新型的侧链含硝基氨杂基因的富能聚醚粘合剂──端羟基２─甲硝胺基乙基缩水甘油醚均聚醚（ＮＰＥ—Ａ）和端羟基共聚醚（ＮＰＥ—Ｂ）的性能进行了研究。结果表明，ＮＰＥ的热稳定性和化学稳定性良好，优于普通碳氢聚醚粘合剂（ＨＣＰＥ）和新型氟碳聚醚粘合剂（ＦＣＰＥ）；其固化后的力学性能良好。简要地叙述了以ＮＰＥ—Ｂ为粘合剂的固体火箭推进剂的配方和性能。     

基于PCI总线的石英晶体元件电参数测试仪

首先介绍PCI总线控制专用芯片S5920的组成,Mailboxs、FIFO、Pass-Thru的基本概念、性能和使用方法。其次介绍测量石英晶体元件参数的阻抗计法和π网络法。对基于PCI总线控制器S5920为核心的π网络法石英晶体元件电参数测试仪的设计和实现作了说明。该方法测量的频率可达2005MHz。利用GPs高精度的授时信号作为频率校准信号校准信号源的精度。     

基于多相正交序列移位序列的CDMA通信系统

介绍多相正交序列的构造方法,对多相正交序列的自相关和互相关特性进行分析。提出采用多相正交序 列的移位序列作为扩频序列的通信方式,并给出接收端序列同步的实现方法。这种方式能解决低相数多相正交序列互 相关特性不理想,而高相数多相正交序列难以搜索的困难。     

一个简单有效的磁记录纠错系统

介绍一种简单有效的纠错编码方法 ,用于资源卫星高密度数字磁记录器 ,使误码率由 10 -6降低到 10 -11,同时介绍它的基本工作原理、实现方案及试验结果。     

基于皮卫星的分布式干扰系统及其关键技术

在对皮卫星的特点总结的基础上,提出了一种基于皮卫星的天基干扰系统,给出了干扰系统的原理性方案,对其中的关键技术进行了分析。     

载人航天可靠性与空间环境试验

文章通过对国外载人航天事故统计,分析各种空间环境条件对航天器及航天员的影响,阐述了空间环境试验对提高载人航天可靠性的重要意义,提出为了提高载人航天的可靠性,应进行充分和严格的空间环境模拟试验。     

Kevlar/Nomex蜂窝夹层结构表面粘贴镀铜箔聚酰亚胺薄膜的工艺研究

文章对Kevlar面板Nomex蜂窝夹层结构表面粘贴镀铜箔聚酰亚胺薄膜的工艺进行了研究,分析了工艺特点、工艺流程、工艺难点,以及针对工艺难点所采取的工艺措施,最后根据产品的研制情况给出结论。