Investigation of longitudinal aerodynamic parameters identification method for fly-by-wire passenger airliners

The flight control system of a fly-by-wire （FBW） passenger airliner with a complex frame-work and high feedback gain augmentation would change the original characteristic of a loaded signal and suppress the excitation of an airplane＇s pertinent motion modes. Taking a research example of an FBW passenger airliner model with longitudinal relaxed-static-stability, a new method of signal type selection and signal parameter design is proposed, through analysis of signal energy distribution and plane body＇s frequency response. According to CCAR60--the Appraisal and Use Regulation of Flight Simulator Device, the simulation validation of the FBW passenger airliner＇s longitudinal aerodynamic parameters identification is put forward. The validation result indicates that the designed signal could excite the longitudinal motion mode of the FBW passenger airliner adequately and the multiparameter comparison in simulation meets the objective test request of CCAR60. Meanwhile, the relative errors of aerodynamic parameters are less than 10%.     

Particle flters for probability hypothesis density flter with the presence of unknown measurement noise covariance

In Bayesian multi-target fltering,knowledge of measurement noise variance is very important.Signifcant mismatches in noise parameters will result in biased estimates.In this paper,a new particle flter for a probability hypothesis density（PHD）flter handling unknown measurement noise variances is proposed.The approach is based on marginalizing the unknown parameters out of the posterior distribution by using variational Bayesian（VB）methods.Moreover,the sequential Monte Carlo method is used to approximate the posterior intensity considering non-linear and non-Gaussian conditions.Unlike other particle flters for this challenging class of PHD flters,the proposed method can adaptively learn the unknown and time-varying noise variances while fltering.Simulation results show that the proposed method improves estimation accuracy in terms of both the number of targets and their states.     

深空探测用塑料闪烁体阵列式缪子探测器电子学采集系统设计

宇宙线缪子成像方法是一种对物质密度敏感的高分辨率、高精度被动源探测技术,无须原位测量,有望成为火星和小行星浅表和内部物质结构成分研究的新兴深空探测手段.鉴于气体探测器、核乳胶探测器使用条件的局限性,设计一种适用于深空探测的多通道读出的塑料闪烁体阵列式缪子探测器,可实现对多路探测器缪子信号的采集.搭建探测器测试系统,在实...     

液压放大式PZT-DDV建模与控制仿真

研制基于液压位移放大原理的压电陶瓷直接驱动伺服阀(PZT-DDV,Piezoelectric-Direct Drive Valve),实现大流量高频响的要求.分析其结构特点,建立系统数学模型,基于AMESim 和Simulink的协同仿真环境,对其进行仿真控制研究.采用AMESim建立了PZT-DDV的模型和虚拟液压测试系统,利用Simulink建立了数字控制器模型,通过接口组成协同仿真环境.针对PZT-DDV的迟滞、摩擦和液压位移放大结构的负载敏感特性,采用前馈控制改善迟滞,提高动态响应.基于LuGre摩擦力模型以及密闭腔压力监测,采用自适应backstepping方法实现摩擦及负载变化对放大机构输出位移的扰动补偿.仿真结果表明:前馈控制提高了系统的动态性能,自适应backstepping控制方法提高了系统的稳态控制精度.     

基于鲁棒自适应反步法的航天器姿态跟踪控制

针对存在未知惯量矩阵和外干扰的刚体航天器姿态跟踪,提出了一种鲁棒自适应控制方法。综合自适应反步法和非线性L2增益干扰抑制方法,用自适应反步法构造系统的Lyapunov函数,获得了具L2增益的鲁棒自适应控制器,以保证姿态跟踪误差系统为一致最终有界稳定,确保估计的航天器惯量参数的有界性,并使从外干扰输入到评价输出的L2增益不大于给定值。仿真结果验证了方法的有效性和可行性。     

嫦娥二号卫星CCD立体相机设计与验证

介绍了嫦娥二号卫星CCD立体相机的设计思想与结果、发射前检测与地面推扫成像试验.嫦娥二号卫星CCD立体相机仍采用与嫦娥一号相同的线阵推扫成像模式,但嫦娥二号卫星CCD立体相机的技术指标要求大幅度提高,主要表现为地元分辨率由嫦娥一号的120m提高为嫦娥二号在100km圆轨上优于7m与在100km/15km椭圆轨道近月弧段...     

一种磁悬浮陀螺飞轮方案设计与关键技术分析

提出一种磁悬浮陀螺飞轮的设计方案,采用洛伦兹力磁轴承对陀螺飞轮转子进行五自由度支承以提供转动自由度,并利用洛伦兹力磁轴承磁力与电流的线性特性,间接测量陀螺仪的输入角速度.该装置作为姿态控制执行机构兼有敏感器功能,可同时进行三自由度姿态控制与两自由度姿态敏感.针对磁悬浮陀螺飞轮二自由度姿态敏感与三自由度姿态控制这两项关键...     

A Modeling Language Based on UML for Modeling Simulation Testing System of Avionic Software

With direct expression of individual application domain patterns and ideas,domain-specific modeling language(DSML) is more and more frequently used to build models instead of using a combination of one or more general constructs.Based on the profile mechanism of unified modeling language(UML) 2.2,a kind of DSML is presented to model simulation testing systems of avionic software(STSAS).To define the syntax,semantics and notions of the DSML,the domain model of the STSAS from which we generalize the domain co...     

平台惯导系统飞行试验性能误差分析

针对某型平台式惯导系统试飞中存在的性能超差现象,对惯导系统误差机理和飞行数据进行了分析,提出了影响飞行性能的误差因素。根据分析结果,从提高惯性元件精度和对相关误差进行标定和补偿两方面采取措施对惯导系统进行改进。改进后的惯导系统经过试飞验证,其性能满足设计指标,表明所采取的改进措施有效可行。     

电容式传声器自由场互易校准数据处理系统设计

基于LabVIEW和Matlab软件开发平台设计了传声器自由场互易校准数据处理系统,该系统可以有效提取电转移阻抗信号,计算声中心和灵敏度级,并通过软件测试证明了系统的可行性。