孔壁通透率对平面附壁射流的影响

本文研究了不同壁面通透率对平面附壁射流动态特性的影响。实验结果表明孔壁减弱、甚至消除了流场中的低频摆动现象。随着孔壁通透率的增加,射流时均附壁点向下游逐渐移动,射流和壁面之间的回流区长度逐渐增大,而射流内侧剪切层内的涡旋与壁面之间的相互作用减小,壁面压强脉动强度变小,附壁射流的动态特性逐渐向自由射流转化。当孔壁通透率为40％左右时,射流与二维平面自由射流类似。距离射流出口不同位置上的壁面脉动压强之间的互谱表明,当孔壁通透率增大以后,射流内侧剪切层中的旋涡向下游传播距离变得更长,传播速度加快,这说明低孔壁通透率情况下的附壁射流中存在的低频摆动现象阻碍了剪切层高频旋涡向下游的发展。     

Nonlinear relative position control of precise formation flying using polynomial eigenstructure assignment

A nonlinear relative position control algorithm is designed for spacecraft precise formation flying. Taking into account the effect of J₂ gravitational perturbations and atmospheric drag, the relative motion dynamic equation of the formation flying is developed in a quasi-linear parameter-varying (QLPV) form without approximation. Base on this QLPV model, polynomial eigenstructure assignment (PEA) is applied to design the controller. The resulting PEA controller is a function of system state and parameters, and produces a closed-loop system with invariant performance over a wide range of conditions. Numerical simulation results show that the performance can fulfill precise formation flying requirements.     

拉压、扭转载荷下铸铝合金的亿周疲劳性能研究

应用超声疲劳试验机对铸铝合金2-AS5U3G-Y35在扭转和拉压循环载荷下进行了超高周疲劳性能测试.介绍了超声扭转疲劳试验装置的设计.应用35 Hz常规疲劳试验机和20 kHz的超声疲劳试验机完成应力比R=-1的拉压、扭转疲劳试验,进而研究不同载荷条件、加载频率对铸铝合金超高周疲劳性能的影响.S-N曲线显示,铝合金在105～1010疲劳周次间仍发生疲劳断裂,不存在疲劳极限.断口分析表明,在超高周循环拉压载荷下,疲劳裂纹常萌生于试样次表面材料内部缩孔.与循环拉压载荷下的疲劳断裂机理不同,在循环扭转载荷下疲劳裂纹主要萌生于试样表面,疲劳断裂面为一种典型的沿试样轴向45°的螺旋面,即沿最大主应力平面断裂.扭转疲劳断面清晰的剪切条带表明扭转疲劳断裂实质上是剪切断裂.     

照射系统故障树的建造及BITE检测点的设置

遵循ＧＪＢ７６８．１提供的方法。以某型雷达为例，探索建造照射系统故障树的方法，阐明取顶事件的角度，故障定义，建树假设等问题，并对其ＢＩＴＥ检测点的设置作了评述。     

片梭织机卷取辊涂布金刚砂的研制

介绍了片梭织机卷取辊涂布金刚砂的制造工艺，并对制造工艺进行了讨论。     

蓝天下的庄严--梅里朝圣记

为了那摇不断的虔诚，为了那搅不散的梦境，为了那捂不热的冰峰，为了那撇不下的绿茵，每年冬季，各地藏胞如涓流汇为江河般源源涌入云南德钦县，因为那里有他们魂牵梦萦的梅里雪山，“梅里”藏语即“神奇”，该山与果洛的阿尼玛卿，那曲的念青唐古拉及阿里的万山之王冈仁波钦合称藏区四大神山，在藏族人心目中，梅里是座永远让人敬畏的灵性之山。     

A biophysical model for estimating the frequency of radiation-induced mutations resulting from chromosomal translocations.

Gene mutations can be induced by radiation as a result of chromosomal translocations. A biophysical model is developed to estimate the frequency of this type of mutation induced by low-LET radiation. Mutations resulting from translocations are assumed to be formed by misrejoining of two DNA double strand breaks (DSB), one within the gene and one on a different chromosome. The chromosome containing the gene is assumed to occupy a spherical territory and does not overlap spatially with other chromosomes. Misrejoining between two DSB can occur only if the two DSB are closer than an interaction distance at the time of their induction. Applying the model to mutations of the hprt gene induced in G0 human lymphocyte cells by low-LET radiation, it is calculated that mutations resulting from translocations account for about 14% of the total mutations. The value of the interaction distance is determined to be 0.6 micrometers by comparing with the observed frequency of translocations in the X-chromosome.     

阈值温度,临界能量与航天器带电特性

采用加权求和方法确定不同能量入射电子对应不同次级(二次发射和反向散射)电子产率公式,用来计算航天材料高压带电的阈值温度T~* 和临界能量E~*,得到了与观测数据较为接近的临界带电特性。文中进一步阐明运用T~* 和E~* 两个概念,可以定性解释航天器带电的复杂特性。