Target racking with glint noise

In tracking targets, there can be an uncertainty associated with the measurements in addition to their inaccuracy, which is usually modeled by aDditive Gaussian noise. However, the Gaussian modeling of the noise may not be true. Noise can be non-Gaussian. The non-Gaussian noise arising in a radar system is known as glint noise. The distribution of glint noise is long tailed and will seriously affect the tracking performance. An algorithm is developed which can significantly improve the tracking performance when glint noise is present     

High LET-induced H2AX phosphorylation around the Bragg curve.

We investigated the spatial distribution of the induction of the phosphorylated form of the histone protein H2AX (gamma-H2AX), known to be activated by DSBs. Following irradiation of human fibroblast cells with 600 MeV/nucleon silicon and 600 MeV/nucleon iron ions we observed the formation of gamma-H2AX aggregates in the shape of streaks stretching over several micrometers in an x/y plane. Polyethylene shielding was used to achieve a Bragg curve distribution with beam geometry parallel to the monolayer of cells. We present data that highlights the formation of immunofluorescent gamma-H2AX tracks showing the ion trajectories across the Bragg peak of irradiated human fibroblast cells. Qualitative analyses of these distributions indicated potentially increased clustering of DNA damage before the Bragg peak, enhanced gamma-H2AX distribution at the peak, and provided visual evidence of high-linear energy transfer particle traversal of cells beyond the Bragg peak in agreement with one-dimensional transport approximations. Spatial assessment of gamma-H2AX fluorescence may provide direct insights into DNA damage across the Bragg curve for high charge and energy ions including the biological consequences of shielding and possible contributors to bystander effects.     

Corner-milling of Thin Walled Cavities on Aeronautical Components

This article presents a mathematical model of helical end-milling forces through experimental identification of the cutting coefficients and analyzes the changes of corner-milling forces under different conditions. In allusion to the corner-milling process, the relationship between working parameters and the corner coordinates is investigated by way of combination of tool tracing and cutting geometrodynamics. The milling parameters are optimized by changing the coordinates of tool center and working parameters without altering cutting forces. By applying the optimized parameters to milling practice, a comparison is made to show the improved product quality. Based on these optimized parameters, a finite element method (FEM) program is used to compute deformation values of a workpiece's corner, which evidences few effects that optimized parameters can exert on the corner deformation.     

Multiple blur of star image and the restoration under dynamic conditions

According to the flight characteristics of vehicle under high dynamic conditions, the impact of linear, angular, and vibrational motion on star sensor imaging was researched. Then, the mathematical model of motion blur corresponding to various flight conditions was deduced, and the star centroiding accuracy affected by motion blur was analyzed subsequently. On this basis, the mechanism of multiple blur was discussed. In order to ensure the accuracy of star sensor in high dynamic environment, a restoration method was proposed to remove the multiple blur. Finally, simulations are implemented to validate the restoration method.     

Current distribution control for parallel connected converters. II

For pt.I, see ibid., vol.28, no.3, p.829-840 (1992). In the central-limit control (CLC), the multiloop controls are employed to regulate the output voltage and track the central weighted current, thus equalizing the output current of each converter module (CM). The current distribution error (CDE) between the output current of each CM is used as a criterion in judging system performance. The prediction and simulation results of this control scheme are illustrated. When incorporated with the maximum current limit, the proposed control method can determine the number of required converters in the active state for each load condition. As a result, the efficiency of a system can be increased significantly. A comparison between the performances of the system under master-slave control (MSC) and CLC is given     

高硅条件下锰对奥贝球铁硬度的影响研究

奥贝球墨铸铁能够实现高硬度的同时具有较高的韧性,适合于一定冲击条件下的耐磨零件工作要求,本文针对奥贝球铁高硅成分中锰的作用研究,为该材料的应用提供了实验基础研究。     

Robust autofocus algorithm for ISAR imaging of moving targets

A robust autofocus approach, referred to as AUTOCLEAN (AUTOfocus via CLEAN), is proposed for the motion compensation in ISAR (inverse synthetic aperture radar) imaging of moving targets. It is a parametric algorithm based on a very flexible data model which takes into account arbitrary range migration and arbitrary phase errors across the synthetic aperture that may be induced by unwanted radial motion of the target as well as propagation or system instability. AUTOCLEAN can be classified as a multiple scatterer algorithm (MSA), but it differs considerably from other existing MSAs in several aspects: (1) Dominant scatterers are selected automatically in the 2D image domain; (2) scatterers may not be well isolated or very dominant; (3) phase and RCS information from each selected scatterer are combined in an optimal way; (4) the troublesome phase unwrapping step is avoided. AUTOCLEAN is computationally efficient and involves only a sequence of FFTs. Another good feature associated with AUTOCLEAN is that its performance can be progressively improved by assuming a larger number of dominant scatterers for the target. Numerical and experimental results have shown that AUTOCLEAN is a very robust autofocus tool for ISAR imaging     

SOLUTION OF 3-D TURBULENCE NAVIER-STOKES EQUATIONS USING HYBRID GRIDS

INTRODUCTIONWith the development of computer,consid-erable process has been made in the developmentof numerical methods for the solution of Navier-Stokes equations.However,most of these me-thods are impractical for complicated flows in adesign environment.The primary reason is thatwe can′t generate a suitable mesh easily for acomplicated configuration.Although there aremany techniques,such as structured grid or un-structured grid,which have been successfullyused for numerical simulation…     

基于ARMA时序模型的结构参数识别集员算法

研究在时域内利用含噪声观测数据识别结构参数问题.建立了与结构振动微分方程等价的自回归滑动平均(ARMA, Autoregressive Moving-Average)时序模型,将结构参数识别问题转换为ARMA模型参数辨识问题.在不确定但有界(UBB, Unknown-But-Bounded)噪声假设下,基于线性时不变系统参数集员辨识的区间算法,寻求与观测数据和噪声相容的参数的最小超长方体(或区间向量),进而得到结构参数的估计值.通过数值算例,将本文算法与最小二乘算法进行了比较,显示了其可行性和有效性.      

矩形通道中亚尺度肋片的流动换热数值分析

对装有不同结构亚尺度肋片矩形通道的流动和换热进行了数值模拟,获得了通道流场、温度场分布以及平均努塞尔数的基本特征,对各种肋片通道的换热特性进行了对比分析.计算结果表明:亚尺度肋片距主肋片根部越近越有利于散热;在远离热面区域,亚尺度肋片的比表面积越大传热效果越好.当扩展表面积相同时,亚尺度肋片的长宽比越大换热效果越好;计算结果及分析揭示了控制肋片最优几何形状的统一原则——广义温度梯度均匀化原则,并依照此原则确定了可以强化换热的较优的肋片结构.计算分析表明广义温度梯度均匀化原则可以控制对流换热过程的传热强化.