复合材料用双组份树脂胶及其贮存期的试验与分析

为满足复合材料制造技术出口的要求,将一种复合材料用树脂胶由单组份状态改变为双组份状态,以达到提升其贮存期的目的。通过试验确定了该双组份树脂胶的配方及其贮存期,提高了树脂胶的使用寿命,为K8飞机出口提供了技术支持。     

高硅条件下锰对奥贝球铁硬度的影响研究

奥贝球墨铸铁能够实现高硬度的同时具有较高的韧性,适合于一定冲击条件下的耐磨零件工作要求,本文针对奥贝球铁高硅成分中锰的作用研究,为该材料的应用提供了实验基础研究。     

The Full Flowpath Analysis of a Hypersonic Vehicle

对一种类X43-A吸气式高超飞行器全流道开展了M7一级的三维数值仿真研究,深入探索了进气道处于起动状态和不起动状态时全流道的冷流流场结构和和气动力特性,且部分结果与实验数据进行了对比。研究结果表明:(1)前体横截面上存在显著的展向压强梯度,使得经过预压缩的气流偏离了进气道进口,但同时也减少了进入内通道的边界层气流,提高了进口流场的品质;(2)后体喷流股的膨胀过程受到了周围外流的显著干扰,因而沿流动方向其截面形状不断发生变化,如在喷口附近为近似矩形,而在后体末端附近则演化为近似三角形;(3)当进气道处于不起动状态时,其全流道流动结构发生了显著变化,进气道的外部压缩波系往复振荡,尾喷管出口的喷流股也在不停的膨胀和收缩,具有极强的非定常特征;(4)当进气道处于不起动状态时,全机的气动力特性呈周期性变化,升阻比的变化幅度较大,在最大、最小值分别可达起动状态的2倍和1/4倍。另外,升力、阻力系数的变化曲线之间存在一定的相位差;(5)与实验结果的对照表明,所采用的数值仿真方法具有较高的精度。     

Robust autofocus algorithm for ISAR imaging of moving targets

A robust autofocus approach, referred to as AUTOCLEAN (AUTOfocus via CLEAN), is proposed for the motion compensation in ISAR (inverse synthetic aperture radar) imaging of moving targets. It is a parametric algorithm based on a very flexible data model which takes into account arbitrary range migration and arbitrary phase errors across the synthetic aperture that may be induced by unwanted radial motion of the target as well as propagation or system instability. AUTOCLEAN can be classified as a multiple scatterer algorithm (MSA), but it differs considerably from other existing MSAs in several aspects: (1) Dominant scatterers are selected automatically in the 2D image domain; (2) scatterers may not be well isolated or very dominant; (3) phase and RCS information from each selected scatterer are combined in an optimal way; (4) the troublesome phase unwrapping step is avoided. AUTOCLEAN is computationally efficient and involves only a sequence of FFTs. Another good feature associated with AUTOCLEAN is that its performance can be progressively improved by assuming a larger number of dominant scatterers for the target. Numerical and experimental results have shown that AUTOCLEAN is a very robust autofocus tool for ISAR imaging     

High Resolution Differential Capacitance Detection Scheme for Micro Levitated Rotor Gyroscope

给出了一种用于新型悬浮结构的使用差分电容进行角度检测的电路分析。为了确保电路具有较小的非线性和高分辨率,进行了电路的噪声分析和和输出信号的非线性度仿真。在电容检测接口中,使用了电荷积分放大器作为前置级以消除由于电容接线引起的寄生电容。分析了当存在耦合电容时差分电容桥的输出以及输出信号的非线性误差,分析结果显示该检测电路可以实现高分辨率和低非线性的角度检测。使用 PSpice 仿真并制作了电容检测印刷电路板。实际实验中,该电路可以检测的最小角度分辨率为 0.04o,非线性误差为 2.3%。     

FSS基本缝隙单元频率特性的实验研究

频率选择表面 (FSS )受到众多的设计参数的影响 ,十分复杂 ,通过实验手段研究FSS结构的基本振子的谐振特性是十分重要的。本文针对矩形缝隙这种基本FSS缝隙单元 ,在 8～ 1 7GHz频段上进行了扫频实验 ,由此分析和总结了几何参数和物理参数对其频率特性的影响 ,最后给出了频率特性随几何参数和物理参数变化而变化的趋势     

氮气介质下钛合金铣削特性的分析研究

提出了用氮气作为切削介质的绿色加工技术,并通过试验设计,分别在干切削和以氮气为介质的切削条件下,对铣削钛合金的铣削力及刀具的后刀面磨损进行了分析研究,最后对试验结果进行了讨论。     

Simulation-based evaluation of a cold atom interferometry gradiometer concept for gravity field recovery

The prospects of future satellite gravimetry missions to sustain a continuous and improved observation of the gravitational field have stimulated studies of new concepts of space inertial sensors with potentially improved precision and stability. This is in particular the case for cold-atom interferometry (CAI) gradiometry which is the object of this paper. The performance of a specific CAI gradiometer design is studied here in terms of quality of the recovered gravity field through a closed-loop numerical simulation of the measurement and processing workflow. First we show that mapping the time-variable field on a monthly basis would require a noise level below $5\text{mE}/\sqrt{\text{Hz}}$. The mission scenarios are therefore focused on the static field, like GOCE. Second, the stringent requirement on the angular velocity of a one-arm gradiometer, which must not exceed ${10}^{-6}$?rad/s, leads to two possible modes of operation of the CAI gradiometer: the nadir and the quasi-inertial mode. In the nadir mode, which corresponds to the usual Earth-pointing satellite attitude, only the gradient $V_{\mathit{yy}}$, along the cross-track direction, is measured. In the quasi-inertial mode, the satellite attitude is approximately constant in the inertial reference frame and the 3 diagonal gradients $V_{\mathit{xx}}\text{,}{V}_{\mathit{yy}}$ and $V_{\mathit{zz}}$ are measured. Both modes are successively simulated for a 239?km altitude orbit and the error on the recovered gravity models eventually compared to GOCE solutions. We conclude that for the specific CAI gradiometer design assumed in this paper, only the quasi-inertial mode scenario would be able to significantly outperform GOCE results at the cost of technically challenging requirements on the orbit and attitude control.     

基于灵敏度分析的结构-声学鲁棒优化设计

针对工程中普遍存在的结构-声场耦合系统,充分考虑系统本身及外载荷的不确定性,提出了求解系统响应范围的区间有限元分析方法及鲁棒优化设计模型.从耦合系统的平衡方程出发,利用中心差分方法得到了系统响应的灵敏度计算公式.引入区间变量来表征信息不足的不确定参数,借助一阶泰勒展式,可以快速估算系统响应的区间上下界.在结构鲁棒优化设计过程中,通过引入灵敏度指标,将原不确定单目标优化问题转化为确定的多目标优化问题.为保证结构性能更加稳定,利用区间可能度刻画约束条件的鲁棒性.数值算例通过某弹舱模型弹性板厚度的优化设计,验证了所建立的鲁棒优化模型及算法的有效性.      

绳驱动并联机器人张力约束工作空间分析

绳驱动三自由度机器人可以实现空间的自由转动.由于绳索只可拉伸不可压缩的单向特性,研究驱动绳索张力对机器人的控制具有重要意义.运用几何和矩阵的方法可以分析绳索的张力分配情况;在存在张力约束的条件下,提出张力系数作为评价张力分配优劣状况的指标,通过计算可以得到张力系数分布图,从而对机器人工作空间有直观的认识,进而提出有效的张力优化算法;通过对最小预紧力影响因素及选取方法的讨论,可以得到动态最小预紧力实时计算公式,保证绳索时刻处于张紧状态;通过样机的力检测系统张力反馈的实验可以验证理论推导.通过对以上几部分的分析和研究,可以对四绳驱动三自由度机器人的张力问题有综合全面的认识.