Advances in Researches on the Middle and Upper Atmosphere in 2008-2010

This paper summarizes the results of the researches on the middle and upper atmosphere obtained by Chinese scientists in 2008-2010. The focuses are specifically placed on the researches being associated with ground-based observation capability development, dynamical processes, the property of atmospheric circulation and the chemistry-climate coupling of the middle atmospheric layers.     

Investigation on Mechanism of Altitude Characteristic for Air-breathing Pulsed Laser Thruster

Altitude characteristic is of great importance for studying when an air-breathing pulsed laser thruster works in the dense atmosphere condition of 0-30 km altitude. The experimental findings all over the world show that the similar relationship between impulse coupling coefficient and altitude. According to strong explosion theory and an ideal gas model, a dimensionless factor indicating energy law of similitude is introduced, and formula of impulse coupling coefficient is deducted. Then theoretical study of altitude characteristic is carried out and mechanism of altitude characteristic is further explained. The results indicate that there is a maximum value of impulse coupling coefficient if the dimensionless factor equals to 0. 41 in theory, and whether the phenomena of maximum appear or not depends on the range of the dimensionless factor related to altitude. As to a conical nozzle with the fixed length of 120 mm, the relationship between the sonic velocity and the dimensionless factor causes the maximum phenomenon at the altitude of about 12. 5 km, and maximum theoretical impulse coupling coefficient is also found in the experimental investigations. The mechanism of altitude characteristic for air-breathing pulsed laser thruster is discovered in this article, which will provide reference for further research on altitude characteristic.     

涡轴发动机涡轮部件改型气动分析

首先对涡轴发动机涡轮部件的变工况特性进行了数值研究,计算结果与实验测量吻合良好。在此基础上,引入拓扑分析手段,对有、无中间承力支板的涡轮内部流场进行了详细分析。结果表明:支板对效率、流量等总体性能参数影响不大。最后对涡轮进行了改型优化,去掉支板,缩小尺寸并由动力涡轮静叶栅作为承力框架。计算表明:通过适当的气动优化,无支板的涡轮气动性能可以进一步提高。     

机载供电系统双余度控制器的容错控制

介绍双发（Twin-engines）系统的战斗机的机载供电系统控制器的设计和实现。机载供电系统控制器是管理飞机的供电系统的航空电子设备,是飞机供电系统的核心设备,肩负飞机安全的使命。为了提高控制器的可靠性和灵活性,放弃传统的模拟方法,使用先进的数字化技术实现对飞机供电、配电系统的管理。在设计中为了提高可靠性,使用主动复制的容错技术,设计了双余度控制器,在发生单通道错误的情况下,整个系统能够正确工作。对机载供电系统控制器容错技术进行了研究,包括双余度系统的管理策略、同步控制机制、余度管理和故障综合、信号比较监控和通道切换逻辑。     

多UCAV协同航路规划算法

针对多UCAV协同航路规划问题,将协同进化理论与扩展Voronoi图模型相结合,提出了一种基于扩展Voronoi图模型与协同进化算法的多UCAV协同航路规划方法。该方法通过协同进化理论的合作机制实现了规划航路的空域协同,通过采用层次分解策略实现了规划航路的时域协同,并且对染色体设计、个体适应度以及进化操作等关键问题进行了研究。     

基于FPGA的高速LVDS接口的实现

给出了一种基于FPGA的高速LVDS接口设计,利用FPGA内部的SelectIO资源,设计并构造了LVDS接口发送单元、LVDS接口接收单元和对齐状态机。并基于Xilinx Virtex-5平台成功搭建了一个500 Mb/s高速LVDS串行互联系统,通过仿真和测试,验证了系统的有效性,为后续采用FPGA实现各种高速协议奠定了良好的基础。     

独立多细节结构耐久性试验寿命的统计标定

在进行疲劳试验评定结构寿命时,为了能真实模拟实际结构形式和传载情况,模拟试件往往设计成多细节试件,进行不完全疲劳寿命试验,必须由多细节试件寿命推断单细节寿命.针对工程上常用的两种寿命分布形式:对数正态分布和双参数Weibull分布,以结构串联失效模型为基础,建立了由相同独立多细节结构疲劳寿命分布确定单细节寿命分布的统计标定方法.当多细节试件寿命服从对数正态分布时,可近似认为单细节寿命也服从对数正态分布,单细节寿命分布参数与多细节试件寿命分布参数间存在确定关系,并且单细节寿命数学期望和标准差均高于多细节试件相应参数;当多细节寿命服从双参数Weibull分布时,单细节寿命也服从双参数Weibull分布,其斜率不变,但位置参数按比例放大.最后给出了一个分析实例.     

改进SA模型对翼型分离流动的数值模拟

采用(CFD,Computational Fluid Dynamics)软件Fluent,选取(SA,Spalart-Allmaras)模型,对风力机翼型S825进行了二维数值模拟,并与实验数据进行比较.针对SA模型不能准确预测翼型尾部流动分离的情况,分析了分离区域内湍流的强非平衡输运特性.研究表明,SA模型中系数C_b1与湍流的非平衡输运特性密切相关,进而提出了修正模型系数C_b1改进SA模型的方法,结果表明该方法能够更准确地模拟风力机翼型分离流动.     

Thermodynamic Characteristic Study of a High-temperature Flow-rate Control Valve for Fuel Supply of Scramjet Engines

Thermodynamic characteristics are of great importance for the performance of a high-temperature flow-rate control valve,as high-temperature environment may bring problems,such as blocking of spool and increasing of leakage,to the valve.In this paper,a high-temperature flow-rate control valve,pilot-controlled by a pneumatic servo system is developed to control the fuel supply for scramjet engines.After introducing the construction and working principle,the thermodynamic mathematical models of the valve are built based on the heat transfer methods inside the valve.By using different boundary conditions,different methods of simulations are carried out and compared.The steady-state and transient temperature field distribution inside the valve body are predicted and temperatures at five interested points are measured.By comparing the simulation and experimental results,a reasonable 3D finite element analysis method is suggested to predict the thermodynamic characteristics of the high-temperature flow-rate control valve.     

Advances in Researches on the Middle and Upper Atmosphere in 2010-2012

This article summarizes the researches on the middle and upper atmosphere by Chinese scientists in 2010?2012. The focuses are placed on the advances in construction of ground-based remote sensing facilities, the mean state and long-term changes in the middle atmosphere circulation, the prevailing dynamical processes, and the coupling of the middle atmospheric layers.