Carrier-wave interference to Loran-C: a statistical evaluation

Loran-C is a pulsed, hyperbolic radio aid for long-range marine, air, and land navigation. The worldwide expansion of Loran-C, especially in Europe, has focused attention on carrier-wave interference to the system. The effects of a multiplicity of carrier-wave interferers (CWIs) on receiver timing measurement accuracy are considered. Both the phase tracking and the cycle-selection performance of receivers are quantified in terms of the probabilities that they will operate correctly within the arbitrarily set error limits. Characteristic functions (CFs) are used to compute these probabilities. Analyses and results are presented for typical situations. The relative sensitivity of the phase tracking and cycle-selection functions to interfering signals are discussed     

On adaptive spatial-temporal processing for airborne surveillanceradar systems

Implementing the optimum spatial-temporal (angle-Doppler) processor involves two crucial issues: the selection of processing configurations, and the development of adaptive algorithms which can efficiently approach the performance potential of the selected configuration. Among the three available configurations, the joint-domain, the cascade space-time, and the cascade time-space, this work shows that, in contrast to a popular belief, the detection performance potentials of both cascade configurations can fall far below that of the joint-domain optimum. In addition, this work presents a new adaptive algorithm, called the Joint-Domain Localized Generalized Likelihood Ratio detection (JDL-GLR), which is data efficient i.e., with fast convergence to the joint-domain optimum, as well as computationally efficient, together with such desirable features as the embedded constant false-alarm rate (CFAR) and robustness in non-Gaussian interference     

k-ε-g紊流燃烧模型数值研究

本文对k-ε-g紊流燃烧模型中模型系数C_R,C_(g1),C_(g2)的选定和计算浓度脉动均方值g的不同方法进行数值研究。计算结果表明模型系数值的选定直接与化学反应速率有关,而其中C_R影响最大。g的计算虽然可有不同方法,而其中微分方程求解最佳。并用实验数据来验证计算结果。     

改进的次时间最优控制

本文在[1][2]基础上进一步探讨了次时间最优控制的改进问题,深入地阐明了次时间最优控制的某些特性后,提出了一个新的改进的设计方法。按照这种方法设计控制系统,不但实用而且可以大幅度提高次时间最优控制的最优性。并用实例比较了各种方法,证明了本文提出的方法的优越性。本文提出的方法应用于工程设计,对于提高系统的最优性是非常有效的。     

数控系统内置式PLC的FPGA实现方法

提出了一种用FPGA实现数控系统内置式PLC的方法.通过在FPGA内部实现PLC逻辑,并提供能够编译PLC指令的编译器,实现了数控系统对通用PLC编程语言的支持.所述方法在基于ARM FPGA的数控系统上得到了实现.     

我省高职高专院校图书馆现代技术应用情况调查

目的比较与探讨不同类型高职高专图书馆现代化技术应用情况方法采用自编问卷对部分高职高专图书馆进行调查结果高职高专图书馆情况差异较大二级学院、民办学院处于前列,新高职、高专、职工大学紧随其后,挂靠学院与普通中专正在崛起。     

Digital Aircraft Sheet Metal Part Manufacturing System and Its Key Technology

The architecture of digital sheet metal manufacturing system is proposed based on the classification of sheet metal manufacturing information.The essence of digital manufacturing is the definition,management and transfer of information,and the key technologies are brought forward and described.It is pointed out that knowledge-based manufacturing elements design is necessary to make digital technology efficient.The management of all kinds of sheet metal manufacturing element information is to build single source of manufacturing data.Multi-state model-based digital transfer and coordination method is designed to provide a foundation for digital manufacturing of aircraft sheet metal part.The application of digital sheet metal manufacturing is exemplified with an aircraft sheet metal part.The application result is compared to that of the traditional analog transfer technology.It is shown that the developed technology can improve part quality,shorten manufacturing time and lower manufacturing cost.     

滚珠丝杠螺距误差补偿法提高数控机床定位精度的研究

在详细论述、对比了实现数控机床滚珠丝杠螺距误差补偿的硬件、软件方法的原理基础上,对滚珠丝杠螺距误差软件补偿法可有效提高数控机床的定位精度进行了试验验证。     

区域极点及方差约束下的航天器拦截控制：静态输出反馈情形

本文提出并讨论了具有选通窗约束的航天器拦截控制问题，指出航天器拦截控制的稳暂态性能指标可表现为系统稳态状态方差及闭环区域极点的形式。然后，基于配置控制的思想，本文完整地给出了期望静态反馈控制器的存在条件及其解析表达式，并举例说明所提设计方法的直接性与有效性     

如何为《飞机工程》撰写符合规范又有创新的论文

介绍了科技论文规范表达对收集、储存、处理、加工、检索、利用、交流和传播的作用，结合《飞机工程》投稿的实际，指出了作者在文字、标点、符号、图表、公式、量和单位表达中容易忽视和写错的一些技术细节，给出了科技论文规范表达的撰写格式，以及为《飞机工程》投稿时应注意的事项。