NUMERICAL SIMULATION OF IMPACT RESPONSE OF COMPOSED CERAMIC/COMPOSITE ARMOUR

ＮＵＭＥＲＩＣＡＬＳＩＭＵＬＡＴＩＯＮＯＦＩＭＰＡＣＴＲＥＳＰＯＮＳＥＯＦＣＯＭＰＯＳＥＤＣＥＲＡＭＩＣ／ＣＯＭＰＯＳＩＴＥＡＲＭＯＵＲＮＵＭＥＲＩＣＡＬＳＩＭＵＬＡＴＩＯＮＯＦＩＭＰＡＣＴＲＥＳＰＯＮＳＥＯＦＣＯＭＰＯＳＥＤＣＥＲＡＭＩＣ／ＣＯＭＰ...     

CALCULATION OF THREE DIMENSIONAL BOUNDARY LAYER EQUATIONS USING DIFFERENTIAL QUADRATURE METHOD

ＣＡＬＣＵＬＡＴＩＯＮＯＦＴＨＲＥＥＤＩＭＥＮＳＩＯＮＡＬＢＯＵＮＤＡＲＹＬＡＹＥＲＥＱＵＡＴＩＯＮＳＵＳＩＮＧＤＩＦＦＥＲＥＮＴＩＡＬＱＵＡＤＲＡＴＵＲＥ　ＭＥＴＨＯＤＴａｎｇＤｅｎｇｂｉｎ；ＣｈｅｎｇＧｕｏｗｅｉ（ＤｅｐａｒｔｍｅｎｔｏｆＡｅｒｏ...     

ITERATIVE COMPUTATION METHOD FOR NONLINEAR FORCED VIBRATION EQUATION ON HELICOPTER MAIN ROTOR LOAD

ＩＴＥＲＡＴＩＶＥＣＯＭＰＵＴＡＴＩＯＮＭＥＴＨＯＤＦＯＲＮＯＮＬＩＮＥＡＲＦＯＲＣＥＤＶＩＢＲＡＴＩＯＮＥＱＵＡＴＩＯＮＯＮＨＥＬＩＣＯＰＴＥＲＭＡＩＮＲＯＴＯＲＬＯＡＤＬｉｕＸｉａｎｇｊｉａｎ；ＳｈｅｎＸｉｎｋａｎｇ；ＸｕｅＺｈｅｎｇｚｈｏｎｇ（...     

一种协作目标定位与协作自定位的并行集成方法

当群智能体在进行目标跟踪时,它们可以以协作的方式对自身和目标进行定位.为了最大限度地发挥群协作的优势,本文设计了一种协作目标定位(Cooperative target-localization,CTL)和协作自定位(Cooperative target-localization,CSL)的并行集成的运行策略.首先,建立...     

Damage characteristics and constitutive modeling of the 2D C/Si C composite: Part I – Experiment and analysis

This paper reports an experimental investigation on the macroscopic mechanical behaviors and damage mechanisms of the plain-woven(2D) C/Si C composite under in-plane on- and offaxis loading conditions. Specimens with 15, 30, and 45 off-axis angles were prepared and tested under monotonic and incremental cyclic tension and compression loads. The obtained results were compared with those of uniaxial tension, compression, and shear specimens. The relationships between the damage modes and the stress state were analyzed based on scanning electronic microscopy(SEM) observations and acoustic emission(AE) data. The test results reveal the remarkable axial anisotropy and unilateral behavior of the material. The off-axis tension test results show that the material is fiber-dominant and the evolution rate of damage and inelastic strain is accelerated under the corresponding combined biaxial tension and shear loads. Due to the damage impediment effect of compression stress, compression specimens show higher mechanical properties and lower damage evolution rates than tension specimens with the same off-axis angle. Under cyclic tension–compression loadings, both on-axis and off-axis specimens exhibit progressive damage deactivation behaviors in the compression range, but with different deactivation rates.     

焊接速度对7050-T7451铝合金搅拌摩擦焊接头疲劳性能的影响

针对5 mm厚航空用铝合金7050-T7451进行了不同焊速时搅拌摩擦焊接头的微观结构和低周疲劳性能的研究.结果表明:接头焊核区面积与焊核区晶粒度都随着焊接速度的增加而减小;转速为400 r/min、焊速为40 mm/min时,接头具有最好的疲劳性能;搅拌摩擦焊接头的低周疲劳裂纹均在接头底部启裂,沿前进侧热机械影响区与焊核区的过渡区域扩展至断裂.