密封舱内漂浮小球运动规律的数值模拟研究

"天宫二号"空间实验室开展了首次人机协同在轨维修技术试验,机械臂操作终端抓取漂浮小球试验为在轨试验任务之一。为研究漂浮小球与机械臂操作终端运动特性之间的匹配性,文章建立了在轨微重力环境下小球运动的物理模型与数学模型,采用动网格方法对不同小球的运动特性进行数值模拟,得到小球的运动规律,由此确定小球的设计参数范围,作为机械臂操作终端系统方案设计的依据。最终,数值模拟结果与"天宫二号"空间实验室在轨试验数据的对比初步验证了该计算结果的正确性。     

基于概率的运载火箭控制系统设计方法研究

针对传统的控制系统极限偏差设计方法导致运载火箭余量大、总体性能下降的问题,综述了基于概率的控制系统设计方法的国内外研究现状,论述了运载火箭控制系统概率设计的基本思想及设计流程,基于概率密度函数建模理论,建立了通过实际控制指令来控制概率密度函数拟合权值的状态空间,并基于最小二乘方法对状态空间中的参数进行了辨识,进而建立了密度函数成型控制模型,提出了基于最优控制理论的运载火箭控制器设计方法,最后通过仿真验证了理论方法的有效性,为我国运载火箭控制系统的精细化设计提供了理论依据。     

一种主动悬架式火星车稳定裕度优化控制策略

针对火星车在非结构化环境下行驶存在的稳定性不足而导致倾覆的风险,提出针对一种六轮主动悬架式火星车的稳定裕度优化控制方法。首先,考虑了火星车悬架机构调整过程中车轮与接触地面滑移和侧倾等运动关系,建立和完善了六轮主动悬架式火星车行驶的运动学模型。然后,以火星车夹角调整机构角度为变量,推导火星车在非结构环境下的稳定裕度模型。之后,使用内点法求解火星车稳定裕度的最优解,并获得期望的夹角调整机构关节角度。在此基础上,对夹角调整机构的关节角度进行规划和控制,实现火星车悬架机构构型的调整,从而提高火星车在非结构化环境下行驶的稳定裕度。最后,对火星车稳定裕度优化控制策略的有效性进行仿真验证,结果表明,所提出的控制方法可有效提高火星车在非结构化环境下行驶的稳定裕度。     

大型星载天线桁架式可折展机构的模态分析

大型空间抛物柱面星载天线具有口径大、约束弱、刚度低、质量小等特点,其机构的空间稳定性直接决定天线的使用寿命和信息传输的可靠性。为准确获得大型空间星载天线在轨稳定性能参数,依据星载天线的高精度和长寿命的设计需求,提出一种新型抛物柱面星载天线结构形式,利用有限元仿真对该新型星载天线作模态分析,并分析相关参数。结果表明:采用Al7075材料的新型抛物柱面星载天线基频满足设计要求。同时,增加上下支杆和上下斜撑杆的截面尺寸可有效提高天线结构的固有频率。该研究为我国大型抛物柱面星载天线设计提供了理论支撑和技术参考。     

民用飞机性能选型指标体系研究

随着飞机事业的发展和现代科技的进步,系统化地规划好采购飞机的机型以及合理安排不同航线段适用机型飞行是相当必要的。分析国内外有关飞机性能选型指标参数研究的现状,从航线经济性、发动机匹配性、航线适应性、机场适应性四个角度出发,进行飞机性能选型的现状分析。基于飞机性能优劣度初步建立了飞机性能选型指标体系,以期为目前国内航空公司飞机选型提供可靠性能参考。     

弹性体运载火箭建模及控制器设计

考虑运载火箭飞行过程中的弹性振动特性,对运载火箭进行全量动力学建模以及控制器设计。首先将运载火箭考虑为一维梁模型并建立全量动力学模型,分别引入自适应滤波姿态控制算法和H_2范数鲁棒增益调度控制算法设计控制器。仿真结果表明:在考虑舵机非线性情况下两种控制方法均能够满足精度要求,在具有较大外部扰动情况下,鲁棒增益调度控制算法相较于自适应滤波算法具有较强的鲁棒性。     

Coupled Lagrangian impingement spray model for doublet impinging injectors under liquid rocket engine operating conditions

To predict the effect of the liquid rocket engine combustion chamber conditions on the impingement spray, the conventional uncoupled spray model for impinging injectors is extended by considering the coupling of the jet impingement process and the ambient gas field. The new coupled model consists of the plain-orifice sub-model, the jet-jet impingement sub-model and the droplet collision sub-model. The parameters of the child droplet are determined with the jet-jet impingement sub-model using correlations about the liquid jet parameters and the chamber conditions.The overall model is benchmarked under various impingement angles, jet momentum and offcenter ratios. Agreement with the published experimental data validates the ability of the model to predict the key spray characteristics, such as the mass flux and mixture ratio distributions in quiescent air. Besides, impinging sprays under changing ambient pressure and non-uniform gas flow are investigated to explore the effect of liquid rocket engine chamber conditions. First, a transient impingement spray during engine start-up phase is simulated with prescribed pressure profile. The minimum average droplet diameter is achieved when the orifices work in cavitation state, and is about 30% smaller than the steady single phase state. Second, the effect of non-uniform gas flow produces off-center impingement and the rotated spray fan by 38°. The proposed model suggests more reasonable impingement spray characteristics than the uncoupled one and can be used as the first step in the complex simulation of coupling impingement spray and combustion in liquid rocket engines.     

Drag derived altitude aided navigation method

The navigation problem of the lifting reentry vehicles has attracted much research interest in the past decade.This paper researches the navigation in the blackout zone during the reentry phase of the aircraft,when the communication signals are attenuated and even interrupted by the blackout zone.However,when calculating altitude,a pure classic inertial navigation algorithm appears imprecise and divergent.In order to obtain a more precise aircraft altitude,this paper applies an integrated navigation method based on inertial navigation algorithms,which uses drag derived altitude to aid the inertial navigation during the blackout zone.This method can overcome the shortcomings of the inertial navigation system and improve the navigation accuracy.To further improve the navigation accuracy,the applicable condition and the main error factors,such as the atmospheric coefficient error and drag coefficient error are analyzed in detail.Then the damping circuit design of the navigation control system and the damping coefficients determination is introduced.The feasibility of the method is verified by the typical reentry trajectory simulation,and the influence of the iterative times on the accuracy is analyzed.Simulation results show that iterative three times achieves the best effect.     

电容式多次放电点火系统设计与试验

针对某型二冲程点燃式空气辅助缸内直喷发动机燃用柴油问题,提出了实现单电容连续多次放电点火的方法,研制了直流电容式多次放电点火模块,进行了多次点火功能性验证及点火能量测试.在此基础上,进行了环境温度为6℃下的冷起动试验及3000r/min小负荷性能试验,结果表明:在该环境条件下,采用5次放电点火策略能够使发动机起动成功,在小负荷工况下,增加点火次数有利于改善缸内燃烧,点火提前角在10°~20°之间时,4次点火对发动机动力性、燃油消耗率及排放性能改善比2次点火更明显,当点火提前角提前至30°后,其改善作用逐渐减小.      

基于图论的燃油管路稳态流动计算方法

基于节点分析法,提出将局部损失并入相应管段的处理方法,推导阻力计算公式,从而得到兼顾沿程和局部损失的稳态流动计算方法。将该计算方法应用于实际的航空发动机燃油管路,采用VB.NET语言编写计算软件;同时,对燃油管路开展三维数值模拟计算。结果表明:局部损失对管路的流量分配影响较大;该计算方法得到的流量分配与数值计算结果趋势吻合很好,差别在±10%。