电离层等离子体主动释放试验研究

等离子体主动释放试验是空间物理研究的一种主动、有效手段. 2013年4月中国科学院空间科学与应用研究中心在海南进行了中国第一次空间等离子体主动释放试验. 探空火箭在190 km高度释放了近1 kg碱金属钡, 形成一团由钡原子和钡离子组成的云团. 利用地面光学观测手段, 记录了钡云从释放初期到末期的演化全过程, 获取了钡云亮度、粒子密度、成分及扩散范围随时间的变化规律. 通过对钡云漂移的研究, 得到低纬度地区释放点处电离层的中性风场特性, 其分析结果对于研究低纬度地区电离层动力学特性具有一定指导意义.      

提高卫星导航性能的阵列参数估计算法

针对卫星导航信号参数估计性能严重影响导航定位精度,提出了一种利用电磁偶极子对提高信号波达方向和极化参数估计性能的方法。充分利用接收数据协方差矩阵,通过两次特征分解,由特征分解的特征值进行极化参数估计。利用小圆环子阵导向矢量得到波达方向的粗略而无模糊的估计,大圆环子阵导向矢量得到有模糊的估计,通过解模糊得到精确的无模糊的估计,从而大幅提高了到达角的估计精度。比较了单个圆环阵列和同心圆环阵列的参数估计性能,分析了参数估计精度对抗干扰性能的影响,仿真结果表明参数估计精度的提高有效改善了卫星导航抗干扰的性能。     

Impact of the orbital eccentricity on the attitude performance before and after the deorbiting phase for Alsat-1

Due to the presence of periodic forcing terms in the gravity gradient torque, orbit eccentricity may produce large response for the roll, yaw and pitch angles. This paper investigates the influence of the orbit eccentricity on the performance of the attitude determination and control subsystem (ADCS) pointing of passive Low Earth Orbit (LEO) satellites stabilized by a gravity gradient boom or having long appendages before and after the deorbiting operation. The contribution of this work is twofold. First, the satellite attitude dynamics and kinematics are modeled by introducing the orbit eccentricity in the equations of motion of a LEO satellite in order to provide the best scenario in which satellite operators can keep the nominal functionality of LEO satellites with a gravity gradient boom after the deorbiting operation. Second, a Quaternion-based Extended Kalman Filter (EKF) is analyzed when the orbit eccentricity is considered in order to determine the influence of this disturbance on the convergence and stability of the filter. The simulations in this work are based on the true parameters of Alsat-1 which is a typical LEO satellite stabilized by a gravity gradient boom. The results show that the orbit eccentricity has a big influence on the pointing system accuracy causing micro-vibrations that affect the geocentric pointing particularly after the deorbiting phase. In this case, satellites have no orbital correction option. The Quaternion-based Extended Kalman Filter analyzed in this paper, achieved satisfactory results for eccentricity values less than 0.4 with respect to pointing system accuracy. However, singularities were observed for eccentricity values greater than 0.4.     

Statistical properties of fatigue damage of Gaussian random loadings

Firstly, the fatigue damages associated with the random loadings were always deemed as high-cycle or very-high-cycle fatigue problems, and based on Chebyshev theorem, the number of rainflow cycles in a given time interval could be recognized as a constant by neglecting its randomness. Secondly, the randomness of fatigue damage induced by the distribution of rainflow cycles was analyzed. According to central limit theorem, the fatigue damage could be assumed to follow Gaussian distribution, and the statistical parameters: mean and variance, were derived from Dirlik's solution. Finally, the proposed method was used to a simulate Gaussian random loading and the measured random loading from an aircraft. Comparisons with observed results were carried out extensively. In the first example, the relative errors of the proposed method are 2.29%, 3.52% and 1.16% for the mean, standard deviation and variation coefficient of fatigue damage, respectively. In the second example, these relative errors are 11.70%, 173.32% and 18.20%, and the larger errors are attributable to non-stationary state of the measured loading to some extent.      

自由分子流微电热推力器工作特性和性能研究

微推进地面试验系统由推进剂贮存供应控制单元、电源供应控制单元、虚拟仪器测控单元和推力器等组成。通过FMMFL的设计加工和地面试验系统建设,在大气状态下,对FMMR的工作特性和性能进行研究,并与理论分析和数值模拟计算结果进行了对比分析。研究结果表明,在大气状态下,基于MEMS的薄膜温度传感器和薄膜加热器工作稳定;当输入功率为14．6W,工作压强为100Pa时,推力器工作温度为600K。推进剂工质为N2时,质量流量为3．720mg／s,比冲为54．254s,推力为1．979mN;推进剂工质为H2O时,质量流量为2．976mg／s,比冲为68．163s,推力为2．000mN。FMMR的各项性能参数与理论分析结果一致。通过优化设计和系统集成,FMMR的性能将得到进一步提高。     

基于稀疏重构的混叠脉冲序列的周期估计

针对于以往方法在克服抖动大和缺失率高的混叠脉冲信号周期估计上的不足,提出了一种基于稀疏重构的混叠脉冲序列的隐藏子周期估计新方法。该方法首先针对由多个具有不同周期的脉冲串混合而成脉冲序列进行插值重采样,然后利用由Ramanujan构造的周期字典,建立了混叠脉冲序列的稀疏表示模型,最后采用联合l_2,0混合范数算法求得混叠脉冲序列的周期估计。方法的优点是具有较强抗噪能力和抗脉冲缺失能力,并且不受初相的改变影响。所需要较少的脉冲数据长度就能得到准确的周期稀疏解。仿真实验表明,所提方法具有更好的估计性能。     

大型客机积水跑道起降附加阻力评估

在飞机整个飞行过程中,起降阶段尽管时间占比很小,却是飞行事故的多发阶段。近几年国内外污染跑道起降冲出和偏离跑道的事故和事故征候不断发生。发生此类事故的一个重要原因就与湿跑道和污染跑道有关。为了保证飞行运行的安全,应确定飞机在污染跑道上的飞行性能。飞机在污染跑道上起降时污染物产生的附加阻力,对飞机的起降性能有很大的影响。分析了积水污染跑道上轮胎溅水图型的形成机理,研究了附加阻力的计算评估方法。算例表明,积水跑道附加阻力与积水深度近似成线性正比关系,与飞机地面滑跑速度近似成平方正比关系。该方法的计算结果符合规律、量级合理,达到了工程应用要求。     

基于WiFi指纹库的室内定位研究进展和展望

首先简要说明了室内定位技术中WiFi定位的优势;然后通过梳理WiFi指纹库的室内定位相关技术研究,简要阐述了WiFi信号的相关特性,并以实验作为佐证,重点介绍了信号传播模型、指纹库构建方法、指纹信号匹配准则和不同手机对WiFi信号敏感差异的标校等相关技术进展;最后,简要介绍了WiFi室内定位技术的未来发展趋势。     

基于ICA和小波脊的多辐射源调制类型识别

针对电子侦察中多个雷达辐射源信号混叠时的调制类型识别问题,利用独立分量分析将多个雷达辐射源信号进行分离,再对分离后的辐射源信号采用小波变换,提取信号时频分布的脊线,最后计算脊线特征值,通过脊线特征值来判断辐射源调制类型.仿真实验验证了该方法的正确性和有效性.     

吸附式压气机转子叶片气动优化设计

进行吸附式压气机转子叶片气动设计方法研究.提出通过迭代设计,应用三维流场计算结果提供S₂流面通流计算损失模型,提高了S₂流面流场计算精度;将最优化方法与数值模拟技术相结合,建立吸气与型面耦合的回转面二维叶型优化设计和三维叶片优化设计软件;应用所构建的设计软件,进行吸附式压气机转子设计,数值模拟结果表明:该转子在0.86的叶尖载荷下,设计点总压比为1.631、等熵效率为0.965,实现了高气动性能.