镀金属碳毡在电磁屏蔽材料中的应用

将三维网络结构的碳毡引入电磁屏蔽材料的应用,对其特有的电磁性能及网络结构作了分析,并进行了复合材料屏蔽效果计算和修正。研究表明：利用碳毡的孔洞结构和尺寸,辅之以金属镀层,能在较宽的频率内对电磁波有良好的屏蔽效率,且不需要很大的填充量。     

复杂结构产品虚拟布局与装配集成系统

在原理方法研究的基础上,以飞行器仪器舱为应用背景,进行原型系统的开发,并给出部分运行实例,表明系统原理及其实现技术具有可行性和实用性.     

Numerical analysis and optimization of boundary layer suction on airfoils

Numerical approach of hybrid laminar flow control(HLFC) is investigated for the suction hole with a width between 0.5 mm and 7 mm. The accuracy of Menter and Langtry’s transition model applied for simulating the flow with boundary layer suction is validated. The experiment data are compared with the computational results. The solutions show that this transition model can predict the transition position with suction control accurately. A well designed laminar airfoil is selected in the present research. For suction control with a single hole, the physical mechanism of suction control, including the impact of suction coefficient and the width and position of the suction hole on control results, is analyzed. The single hole simulation results indicate that it is favorable for transition delay and drag reduction to increase the suction coefficient and set the hole position closer to the trailing edge properly. The modified radial basis function(RBF) neural network and the modified differential evolution algorithm are used to optimize the design for suction control with three holes. The design variables are suction coefficient, hole width, hole position and hole spacing. The optimization target is to obtain the minimum drag coefficient. After optimization,the transition delay can be up to 17% and the aerodynamic drag coefficient can decrease by 12.1%.     

一种临近空间升浮一体飞行器气动布局设计研究

应用理论方法和数值模拟方法开展升浮一体太阳能无人机气动布局设计研究,通过优化选形设计获得高升阻比气动布局,对比两种方法的计算结果以及分析存在差别的原因;应用张线天平支撑风洞试验测试技术,对设计布局开展实验验证研究,建立大展弦比的双机身气动布局风洞试验测试方法,分析了不同雷诺数下实验模型的纵向和横向气动特性影响。研究结果表明:风洞试验结果与设计结果吻合良好,验证了设计结果的可靠性,获得了对总体设计具有指导意义的结论和试验数据结果。     

Design and experimental study of a micro-groove grinding wheel with spray cooling effect

The effectiveness of grinding fluid supply has a crucial impact on grinding quality and efficiency in high speed grinding. In order to improve the cooling and lubrication, through in-depth research of self-inhaling internal cooling method and intermittent grinding mechanism, a new spray cooling method used in high speed grinding is proposed. By referring to the structure of bowl- shaped dispersion disk, the grinding wheel matrix with atomization ability is designed; through studying heat transfer of droplet collision and the influence of micro-groove on the boiling heat transfer, grinding segment with micro-groove is designed to enhance the heat flux of coolant and achieve maximum heat transfer between droplets and grinding contact zone. High-speed grinding experiments on GH4169 with the developed grinding wheel are carried out. The results show that with the micro-groove grinding wheel just 5.4% of pump outlet flow rate and 0.5% of spindle energy is needed to reduce the grinding temperature to 200℃, which means the developed grinding wheel makes cooling high efficient and low energy consuming.     

单扇区管制移交间隔管理模型和算法研究

针对区域管制移交间隔管理问题进行研究,通过分析当前的流量管理模型和算法,提出单个扇区管制移交间隔管理模型。在研究中,引入间隔矩阵概念,以指定时段内的延误控制为目标,分析扇区容量和管制移交高度层选择等限制因素,建立数学模型,并通过间隔增量矩阵的使用来优化算法。算例中采用在国内某区域管制范围内的繁忙时段数据进行了分析和验证。     

CFRP钻削过程的切削热研究进展

以CFRP钻削加工过程的切削热和切削温度为研究对象,从其形成机理、产生的影响以及影响切削热的因素和控制切削热的方法四个方面进行了系统综述,对存在的问题进行了综合分析,并对今后研究方向进行了展望。     

全站仪检测数据管理系统

介绍了全站仪检测数据管理系统。本系统以FoxPro for Windows为基础,采用模块结构,具有对检测数据录入修改,自动转换,成果计算,查询显示等功能,实现了系统数据管理和处理的一体化。     

空间等离子体导致高电压太阳阵的电流收集

给出一种能方便计算空间等离子体引起高电压太阳阵（HVSA）电流收集的理论统计模式，通过对物理过程分析认为空间等离子体致HVSA的功率损耗对HVASA的设计是不应忽视的。     

面向用户的以太网可用性模型

带冲突检测的载波侦听多路访问协议(CSMA/CD)可以有效的解决竞争,提供高的吞吐量和低的延迟时间,并且成为了局域网设计中颇具吸引力的协议.基于计算机以太网CSMA/CD协议,面向用户探讨以太网可用度模型.通过定义工作站"拥塞状态"和"空闲状态",建立基于网络带宽、时隙的可用度模型.以信息成功发送概率作为衡量以太网可用性的指标.根据以太网中工作站的数量、平均字节长度、单机产生数据的速率以及单机数据重传速率对可用性影响的分析表明,随着局域网中接入的工作站的数量的增加在相同的时间内局域网的可用度将降低.随着数据产生率的升高,局域网的可用度将首先升高,当网络达到饱和后再增加数据产生率,局域网的可用度将降低.提高数据的重传率能够提高局域网的可用度.根据以上的分析,通过合理的设置网络参数,可以使局域网达到理想的可用度.