特材零件除油工艺参数的优化研究

特材零件除油作为表面处理重要而又关键的环节,直接影响表面膜层的形 成和性能。本文重点论述了除油工艺的重要性和特材零件油污的来源,并有针对性的对 汽油浸泡、表面活性剂超声清洗、阴极电解除油等除油方法进行试验研究,优化各工序 工艺参数。除油效果采用水润法进行检验,检验结果表明：试验确定的除油工艺方法合 理,效果明显,去除了特材基体表面油污,露出了活泼的特材基体,为特材表面获得优 良的表面处理膜层打下了基础。     

单向陶瓷基复合材料任意应力本构行为快速计算方法

为了实现快速预测陶瓷基复合材料(CMCs)任意应力加卸载作用后的损伤状态和本构行为,对CMCs任意应力加卸载力学行为进行研究。提出了任意应力加卸载曲线简化方法,得到仅包含决定CMCs损伤状态的等效载荷曲线。基于剪滞模型,直接给出CMCs在等效载荷曲线作用后的滑移区分布,避免对载荷曲线的逐点计算。进而预测了材料的损伤状态和应力应变行为。将原始加卸载曲线带入剪滞模型,计算CMCs滑移区分布和应力应变,并与本文提出的方法进行比较,结果表明,两种计算方法计算的结果一致,说明了本文提出的载荷曲线简化方法和滑移区分布计算方法是可行的。     

Hybrid Simulation System Study of SINS/CNS Integrated Navigation

In flight tests, to demonstrate the performance of integrated navigation systems, which are strapdown inertial navigation systems/celestial navigation systems (SINS/CNS), will involve a lot of effort and a heavy financial budget. So, it is important to design a functional self-contained hardware in a loop simulation system on the ground for solving the verification of SINS/CNS integrated navigation systems. Aiming at solving the main program, a high precision, versatile and better real-time performance hybrid simulation system of SINS/CNS integrated navigation is presented. The system adopts the design of hardware-functional modularization and software-flow integration, and makes use of a trajectory generator to produce simulated nominal trajectory data which is a uniform reference to signal process, and employs unique time synchronization algorithms to collect actual errors data of inertial sub-system and celestial sub-system. By combining with nominal trajectory data, the data smoothing, all-sky autonomous star map identification and integrated navigation algorithm based on unscented Kalman filtering (UKF), this system can accomplish a lot of system performance testing. It has the features of flexibility and extensibility and can be used to effectively reduce the experimental expense and shorten the development time of integrated navigation system, which is significant for studying algorithm performance, system speciality, and practical application of integrated navigation system.     

Research on compensation of motion,Earth curvature and tropospheric delay in GEOSAR

GEOSAR (synthetic aperture radar on geosynchronous satellite) becomes a potential method of space-borne geoscience remote sensing. Though it has attractive characters such as extra long observing time and very large observing area the unique geometry and relative motion are quite different from straight line required by SAR, and long integration time also causes delay by troposphere and ionosphere. Curvature of the Earth is no long negligible in GEOSAR. Especially, principle of azimuth compression in GEOSAR should be different from that of traditional SAR.In order to fulfill practical GEOSAR such problems should be solved. A new solution of azimuth compression together with motion compensation is presented here by taking the advantages of GEOSAR movement. A new method to overcome the Earth curvature in range compression of EACH footprint is testified. After compensating the Earth curvature traditional methods for range cell migration correction can be used in GEOSAR. Multi-sub-aperture method is applied to eliminate the phase delay caused by troposphere. This modified imaging algorithm makes it possible for GEOSAR to have long integration time and high resolution.     

空气系统引气对压气机性能影响的数值研究

空气系统从高压压气机中引出的气流已达到主流流量的3%～5%,然而空气系统引气对压气机性能的影响研究较少.本文以低速单级压气机为研究对象,根据引气对压气机性能的影响机理设计了6种引气结构,并针对其中1种引气结构进行了5种不同引气量的研究.通过数值模拟,讨论了不同引气结构和引气量对压气机性能的影响.结果表明:对于角区大分离的静子,端壁引气可以较小的引气量获得压气机总压升和稳定工作裕度的全面提升.而且端壁的引气量并不是越大越好,存在最佳值.     

统筹图中求有关参数的权关联矩阵算法

给出一个求统筹图中有关参数的数值算法，证明了算法的理论依据，并举例说明算法的应用。     

基于模糊分数阶PI~λD~μ的柔性结构振动主动控制

为防止翅翼结构因干扰而产生振颤,以柔性悬臂梁结构为被控对象,提出一种参数自整定的分数阶比例积分微分控制器,在利用遗传算法取得优化参数后,通过模糊规则第2次对控制器参数进行在线整定,以达到实时最优控制的目的.在Simulink软件环境下进行了数值仿真,结果表明:设计的分数阶比例积分微分控制器具有记忆性,动态表征能力强.与常规比例积分微分控制器相比,冲击激励下的系统响应稳态时间缩短0.9s;简谐激励下的系统响应衰减幅度从88%提升到96%;随机激励下系统响应抖动减小,提高了稳定性.     

Finite-time sliding mode attitude control for a reentry vehicle with blended aerodynamic surfaces and a reaction control system

This paper proposes a finite-time robust flight controller, targeting for a reentry vehicle with blended aerodynamic surfaces and a reaction control system(RCS). Firstly, a novel finite-time attitude controller is pointed out with the introduction of a nonsingular finite-time sliding mode manifold. The attitude tracking errors are mathematically proved to converge to zero within finite time which can be estimated. In order to improve the performance, a second-order finite-time sliding mode controller is further developed to effectively alleviate chattering without any deterioration of robustness and accuracy. Moreover, an optimization control allocation algorithm, using linear programming and a pulse-width pulse-frequency(PWPF) modulator, is designed to allocate torque commands for all the aerodynamic surface deflections and on–off switching-states of RCS thrusters.Simulations are provided for the reentry vehicle considering uncertain parameters and external disturbances for practical purposes, and the results demonstrate the effectiveness and robustness of the attitude control system.     

发动机主动间隙控制系统的应用及发展趋势

为了尽可能减少燃油消耗,并进一步降低使用成本和环境影响,航空发动机需要保持较高的整机效率。由于涡轮间隙严重影响涡轮效率,为消除其不利影响,分析了叶尖间隙形成和变化的机理及主要影响因素,重点综述了3种不同的主动间隙控制系统的控制方法及其技术特点,总结了主动间隙控制在提高整机效率、降低燃油消耗、减少排放、降低维护费用等方面的巨大收益,并对主动间隙控制技术的关键技术和未来发展方向进行了讨论。认为国内需要认识到主动间隙控制技术的重要性并大力开展其关键技术研究。