垫层拉深工艺的试验研究

本文采用试验方法研究了聚乙烯膜在坯料与凹模表面之间的润滑效果，测定了不同润滑方式，ＳＰＣＣ和Ｌ４Ｍ板材的极限拉深系数，分析了采用了聚乙烯膜为润滑的润滑机理。结果表明，垫层拉深工艺能够有效地改善拉深件的表面质量，降低极限拉深系数，使变形程度得到提高。该研究结果对于改善拉深件的表面质量和提高变形程序，具有积极意义。     

一种新的综合TF／TA最优航迹算法

综合ＴＦ／ＴＡ是新一代低空突防技术，ＴＦ／ＴＡ最优航迹的计算是其控制系统的核心。文中提出了一种新的综合ＴＦ／ＴＡ最优航迹算法，它用动态规划和树型搜索相结合的方法，实时计算综合ＴＦ／ＴＡ最优航迹。算法考虑了飞机机动能力的约束，使最优航迹在不需要平滑处理时就是一个可实现航迹。另外还考虑了威胁的影响，使最优航迹能有效地进行威胁回避。计算结果表明，所得的最优航迹具有综合地形跟踪／回避和威胁回避的能力。     

信号源失真对波形记录仪动态有效位数评价的影响(英文)

波形记录仪和数据采集系统等设备的动态有效位数评价中,大都假定所用正弦波信号源无任何失真.当信号源具有噪声或谐波失真时,给评价结果将带来多大的影响,尚无确切的结论,这使得对有效位数评价结果无法进行量值溯源.本文从能量守衡角度,阐述了信号源噪声失真对波形记录仪动态有效位数评价结果的影响,同时给出了由输入信号源噪声和谐波失真带来影响的修正关系式,以及在给定误差限度下,信号源失真度选择原则的关系式。     

疲劳S-N曲线预测的三维断裂力学方法

根据旋转弯典圆棒疲劳断口分析,给出了裂纹几何参量及应用强度因子随裂纹扩展的变化规律,采用考虑三维应力约束效应的断裂力学理论及常幅载荷下材料的疲劳裂纹扩展da/dN-ΔK曲线,得到了独立于试件几何形状和应力比的材料da/dN-ΔKeff基准数据,结合断口分析所得的应力强度因子以及材料da/dN-Δkeff数据,以三种旋转弯曲圆棒S－N（应力－疲劳寿命）曲线进行了预测,结果表明,本文预测的疲劳S－N曲线和试验的结果较为吻合,本文的S－N曲线断裂力学预测方法对确定结构全寿命具有实际指导意义,同时也揭示了发展疲劳断裂统一理论的可行性。     

基于尺度不变特征的眼底图像自动配准与拼接

针对眼底图像对比度低、光照不均匀、不同视场的图像间存在几何畸变等特点,提出了一种基于尺度不变特征的眼底图像自动配准与拼接算法.该算法分别提取同态滤波增强后的待配准眼底图像的尺度不变特征点,并用向量进行描述,确定相邻两图像特征点的匹配关系,在MLESAC算法中使用透视变换模型去除误匹配点对,计算匹配点对之间的变换矩阵,进行图像空间变换,完成配准和拼接.对实际眼底照相机获取的多幅图像配准与拼接结果表明,该算法具有很好的鲁棒性和稳健性,配准精度达到像素级,可以实现眼底图像的高精度自动配准与拼接.     

面向空域/时域/功能混合模式的目标分组方法

提出了面向空域/时域/功能混合模式的目标分组方法,其结果为任务规划提供了包含空域、时域、功能的目标群体特征.该方法采用标准化方法对属性数据分类和扩展,按照不同类型属性数据分别建立属性差异度,提高了目标分组特征属性的可扩展性,解决了传统属性差异度难以适用于时域及功能属性的问题;在此基础上,综合考虑协同任务对目标分组各项属性的定性/定量要求、阈值约束及重要程度要求,构造了目标综合差异度,解决了某些属性不能直接加权的问题.仿真结果表明该方法能够快速有效地实现满足任务复杂要求的目标分组.     

高速流非平行边界层稳定性研究

导出了可压缩流的抛物化稳定性方程（PSE）。针对高速流动,特别是超声速和高超声速流动的非平行边界层稳定性问题进行了研究。引入高效的边界层变换、全流场高精度的差分格式及预估校正迭代和推进求解法来求解PSE方程,使得PSE方法中至关重要的正规化条件得到了满足,确保了数值计算的稳定。采用高马赫数下对稳定性起支配作用的第二模式,研究了高速流边界层稳定性的演变和特征,分析了流动的非平行性、压缩性,以及壁面冷却等因素对流动稳定性的影响．所得结果与相关实验数据吻合较好。     

Scientific objectives and payloads of Tianwen-1, China’s first Mars exploration mission

This paper describes the scientific objectives and payloads of Tianwen-1, China’s first exploration mission to Mars. An orbiter, carrying a lander and a rover, lifted-off in July 2020 for a journey to Mars where it should arrive in February 2021. A suite of 13 scientific payloads, for in-situ and remote sensing, autonomously commanded by integrated payload controllers and mounted on the orbiter and the rover will study the magnetosphere and ionosphere of Mars and the relation with the solar wind, the atmosphere, surface and subsurface of the planet, looking at the topography, composition and structure and in particular for subsurface ice. The mission will also investigate Mars climate history. It is expected that Tianwen-1 will contribute significantly to advance our scientific knowledge of Mars.     

Characterization and Calibration of the CheMin Mineralogical Instrument on Mars Science Laboratory

A principal goal of the Mars Science Laboratory (MSL) rover Curiosity is to identify and characterize past habitable environments on Mars. Determination of the mineralogical and chemical composition of Martian rocks and soils constrains their formation and alteration pathways, providing information on climate and habitability through time. The CheMin X-ray diffraction (XRD) and X-ray fluorescence (XRF) instrument on MSL will return accurate mineralogical identifications and quantitative phase abundances for scooped soil samples and drilled rock powders collected at Gale Crater during Curiosity’s 1-Mars-year nominal mission. The instrument has a Co X-ray source and a cooled charge-coupled device (CCD) detector arranged in transmission geometry with the sample. CheMin’s angular range of 5^° to 50^° 2θ with <0.35^° 2θ resolution is sufficient to identify and quantify virtually all minerals. CheMin’s XRF requirement was descoped for technical and budgetary reasons. However, X-ray energy discrimination is still required to separate Co?Kα from Co?Kβ and Fe?Kα photons. The X-ray energy-dispersive histograms (EDH) returned along with XRD for instrument evaluation should be useful in identifying elements Z>13 that are contained in the sample. The CheMin XRD is equipped with internal chemical and mineralogical standards and 27 reusable sample cells with either Mylar^? or Kapton^? windows to accommodate acidic-to-basic environmental conditions. The CheMin flight model (FM) instrument will be calibrated utilizing analyses of common samples against a demonstration-model (DM) instrument and CheMin-like laboratory instruments. The samples include phyllosilicate and sulfate minerals that are expected at Gale crater on the basis of remote sensing observations.     

Coupled Stress-Electricity Model for Electromagnetic Emission Induced by Concrete Fracture

Electromagnetic emission induced during concrete fracturing is of great significance to health monitoring of concrete structures.A coupled stress-electricity model is established by analyzing the interaction between stress and electricity during concrete fracturing.And based on this model,the electromagnetic radiation parameters are calculated.The theoretical calculation is well coincident with experimental results.This work provides theoretical support for concrete testing system.