提高自动驾驶仪可靠性的一个途径

本文在分析自动驾驶仪可调电位器一般配置情况的基础上,提出了减少可调电位器使用数量以提高可靠性思路以供设计者考虑。     

芬兰国家馆--冰壶

力举"优裕、才智与环境"三大元素,围绕2010年上海世博会主题"城市,让生活更美好!",芬兰国家馆的设计,以其突出和未来实现"更美好生活"的理念而独树一帜。     

DEFORM工艺仿真系统

<正>DEFORM是一套基于有限元的工艺仿真系统,用于分析金属成形及其相关工业的各种成形工艺和热处理工艺。20多年的工业     

飞机大迎角飞行稳定性判据分析

 1.引言 随着高机动性飞机的发展,大迎角飞行稳定性日益线引起人们的关注,并各自根据特定的条件作了相应的简化,提出了并种简化适用的大迎角飞行稳定性判据,如急滚机动的Phillips准则、方向发散的动方向稳定性参数m_(y·dyn)~β、横向操纵偏离参数LCDP、以及预测偏离的     

Y-TECHTM钻头——解决钻削难题的法宝

为解决双相不锈钢、钛合金和高温合金及其他难以加工的工件材料的钻削难题,Kennametal设计了一种创新解决方案——Y-TECH钻。它具有3个刃带和不对称间距的排屑槽,外形格外引人注目,这种钻头采用KC7315材质制成。YPL(Y-TECH钻尖轻型倒圆)钻尖可防止切屑堵塞,提高钻头定心功能,     

Schemed Power-augmented Flow for Wing-in-ground Effect Craft in Cruise

To provide detailed insight into schemed power-augmented flow for wing-in-ground effect(WIG) craft in view of the concept of cruising with power assistance,this paper presents a numerical study.The engine installed before the wing for power-augmented flow is replaced by a simplified engine model in the simulations,and is considered to be equipped with a thrust vector nozzle.Flow features with different deflected nozzle angles are studied.Comparisons are made on aerodynamics to evaluate performance of power-augmented ram(PAR) modes in cruise.Considerable schemes of power-augmented flow in cruise are described.The air blown from the PAR engine accelerates the flow around wing and a high-speed attached flow near the trailing edge is recorded for certain deflected nozzle angles.This effect takes place and therefore the separation is prevented not only at the trailing edge but also on the whole upper side.The realization of suction varies with PAR modes.It is also found that scheme of blowing air under the wing for PAR engine is aerodynamically not efficient in cruise.The power-augmented flow is extremely complicated.The numerical results give clear depiction of the flow.Optimal scheme of power-augmented flow with respect to the craft in cruise depends on the specific engines and the flight regimes.     

新型防空导弹制导控制系统展望

本文从防空导弹面临的新挑战出发,对新型防空导弹制导控制系统的技术发展进行了展望。提出了15项应该发展的制导控制技术以期引起读者的兴趣。     

复合材料构件R区的超声相控阵检测实验

针对复合材料构件R区的超声检测问题,开展超声相控阵检测实验研究.分析R区的检测难点,利用超声相控阵检测技术的优势,分别提出了基于相控阵弧阵换能器和线阵换能器的两种检测方法;对复合材料L型试样的R区进行超声相控阵检测实验,验证了两种检测方法的正确性;并与常规超声检测方法进行对比,分析了超声相控阵技术检测R区的技术优势.研究结果表明:超声相控阵检测技术具有适用性强、检测效率高等优势,可以满足复合材料构件R区的检测要求.     

民机飞行载荷谱编制方法

探索了由同类机型的飞行实测载荷统计数据,推断新设计机型的飞行谱,进而编制其载荷谱的新途径.采用国外同类飞机的飞行实测载荷统计数据,依据类比法,分析和推断出某民机的飞行谱以及各飞行状态连续应力谱;在此基础上,根据民用运输机的TWIST编谱方法,编制了各飞行状态的突风和机动载荷谱,最终,随机生成了其飞行谱对应的5×5地-空-地载荷谱,从而验证了探索途径的可行性与有效性.采用该方法可以加快民机研制周期.     

CFD Study of NO_x Emissions in a Model Commercial Aircraft Engine Combustor

Air worthiness requirements of the aircraft engine emission bring new challenges to the combustor research and design. With the motivation to design high performance and clean combustor, computational fluid dynamics (CFD) is utilized as the powerful design approach. In this paper, Reynolds averaged Navier-Stokes (RANS) equations of reactive two-phase flow in an experimental low emission combustor is performed. The numerical approach uses an implicit compressible gas solver together with a Lagrangian liquid-phase tracking method and the extended coherent flamelet model for turbulence-combustion interaction. The NOx formation is modeled by the concept of post-processing, which resolves the NOx transport equation with the assumption of frozen temperature distribution. Both turbulence-combustion interaction model and NOx formation model are firstly evaluated by the comparison of experimental data published in open literature of a lean direct injection (LDI) combustor. The test rig studied in this paper is called low emission stirred swirl (LESS) combustor, which is a two-stage model combustor, fueled with liquid kerosene (RP-3) and designed by Beihang University (BUAA). The main stage of LESS combustor employs the principle of lean prevaporized and premixed (LPP) concept to reduce pollutant, and the pilot stage depends on a diffusion flame for flame stabili-zation. Detailed numerical results including species distribution, turbulence performance and burning performance are qualita-tively and quantitatively evaluated. Numerical prediction of NOx emission shows a good agreement with test data at both idle condition and full power condition of LESS combustor. Preliminary results of the flame structure are shown in this paper. The flame stabilization mechanism and NOx reduction effort are also discussed with in-depth analysis.