构建现代企业制度下的激励机制

国有企业改革的关键是要构建现代企业制度,而激励机制的陈旧落后将严重制约现代企业活力的发挥。本文结合我国过去计划经济体制下国有企业存在的激励问题,探讨了新时期构建现代企业制度下的激励机制的思路。     

连续自由流电泳微重力下分离模式蛋白质的研究

以连续自由流电泳的区带电泳模式分离血红蛋白和细胞色素C，比较了不同缓冲液甘油浓度下的分离效果，确定了最终装载在神舟4号飞船上A3—2型电泳仪的电泳分离条件，通过地面和空间实验，初步探讨了微重力对连续自由流电泳分离的影响，并对电泳的分离产物做了多种检测．     

MATLAB在飞机环境控制系统仿真中的应用

介绍了在MATLAB环境下,对飞机环境控制系统的建模方法,开发了飞机环控系统综合仿真的MATLAB工具箱.简单介绍了所开发的仿真工具箱,并且用此工具箱对某型飞机的环控系统进行了仿真研究,与实验结果的对比表明,所开发的工具箱,具有很高的仿真精度.     

Influence of TiB2 particles on machinability and machining parameter optimization of TiB2/Al MMCs

In situ formed TiB₂ particle reinforced aluminum matrix composites (TiB₂/Al MMCs) have some extraordinary properties which make them be a promising material for high performance aero-engine blade. Due to the influence of TiB₂ particles, the machinability is still a problem which restricts the application of TiB₂/Al MMCs. In order to meet the industrial requirements, the influence of TiB₂ particles on the machinability of TiB₂/Al MMCs was investigated experimentally. Moreover, the optimal machining conditions for this kind of MMCs were investigated in this study. The major conclusions are: (1) the machining force of TiB₂/Al MMCs is bigger than that of non-reinforced alloy and mainly controlled by feed rate; (2) the residual stress of TiB₂/Al MMCs is compressive while that of non-reinforced alloy is nearly neutral; (3) the surface roughness of TiB₂/Al MMCs is smaller than that of non-reinforced alloy under the same cutting speed, but reverse result was observed when the feed rate increased; (4) a multi-objective optimization model for surface roughness and material removal rate (MRR) was established, and a set of optimal parameter combinations of the machining was obtained. The results show a great difference from SiC particle reinforced MMCs and provide a useful guide for a better control of machining process of this material.     

Wilkinson定理扰动界的改进估计

Wilkinson定理是代数特征值问题中的一个经典定理,文章给出了Wilkinson定理的结果中关于扰动矩阵上界的另一种估计形式,并指出该形式对Wilkinson定理具有一定的改进。     

Microwave Photonics for Modern Radar Systems

The emerging new concepts and technologies based on microwave photonics have led to an ever-increasing interest in developing innovative radar systems with a net gain in functionality, bandwidth/resolution, size, mass, complexity and cost when compared with the traditional implementations. This paper describes the techniques de- veloped in the last few years in microwave photonics that might revolutionize the way to design multifunction radar systems, with an emphasis on the recent advances in optoelectronic oscillators （OEOs）, arbitrary waveform gener- ation, photonic mixing, phase coding, filtering, beamforming, analog-to-digital conversion, and stable radio-fre- quency signal transfer. Challenges in implementation of these components and subsystems for meeting the technique requirements of the multifunction radar applications are discussed.     

Geometric error analysis of an over-constrained parallel tracking mechanism using the screw theory

This paper deals with geometric error modeling and sensitivity analysis of an overconstrained parallel tracking mechanism. The main contribution is the consideration of overconstrained features that are usually ignored in previous research. The reciprocal property between a motion and a force is applied to tackle this problem in the framework of the screw theory. First of all, a nominal kinematic model of the parallel tracking mechanism is formulated. On this basis, the actual twist of the moving platform is computed through the superposition of the joint twist and geometric errors. The actuation and constrained wrenches of each limb are applied to exclude the joint displacement. After eliminating repeated errors brought by the multiplication of wrenches, a geometric error model of the parallel tracking mechanism is built. Furthermore,two sensitivity indices are defined to select essential geometric errors for future kinematic calibration. Finally, the geometric error model with minimum geometric errors is verified by simulation with SolidWorks software. Two typical poses of the parallel tracking mechanism are selected, and the differences between simulation and calculation results are very small. The results confirm the correctness and accuracy of the geometric error modeling method for over-constrained parallel mechanisms.     

基于人工神经网络的停机坪安全预警研究

停机坪是机场的重要组成部分,停机坪安全是机场安全关注的重点。影响停机坪安全作业的要素有很多,通过对这些要素进行监控和预警,可以减少停机坪的安全隐患,保证机场正常运行。根据济南遥墙机场的主要数据,运用因子分析法对影响停机坪安全的主要因素进行分类,提取公共因子。并运用人工神经网络（ANN）方法,对这些公共因子进行神经网络训练和预测分析,最终得到遥墙机场停机坪的安全情况。     

基于非线性变换的加速度计误差标定与补偿CSCD

为提高三轴加速度计测量精度,分析其误差来源和产生机理,建立了误差模型;根据误差模型和重力场幅值不变特性,推导出非线性观测方程。引入两个未知的参数向量,通过数学变换把非线性观测方程变形为关于新未知参数的线性方程;然后采用批量最小二乘法求出新的未知参数,并根据误差模型参数和新未知参数之间的关系,利用逆解析运算求出对应的零点偏差、灵敏度误差和三轴不正交误差。实验结果表明,加速度计正负误差峰值间距可以减小100倍左右,精度可达10-3m/s2,并具有很好的可重复性。该方法算法效率较高,补偿效果显著。     

卷簧式浅层月壤取样器设计及动力学分析

面向浅层月壤取样,文章设计了新颖的卷簧式可伸缩小型月壤取样器,它包括柔性取样臂和振动式取样头。对取样器进行了动力学有限元分析,研究了取样臂为不同长度时取样头的振动模态及频率响应,得出取样臂一阶横振频率与取样臂长度呈负幂函数关系;对取样器测控系统进行了振动试验,通过扫频方式测量取样臂为不同长度时的自振频率,给出了取样臂长...