Spatial orientation during locomotion [correction of locomation] following space flight

To investigate changes in spatial orientation ability and walking performance following space flight, 7 astronaut subjects were asked pre- and post-flight to perform a goal directed locomotion paradigm which consisted of walking a triangular path with and without vision. This new paradigm, involving inputs from different sensory systems, allows quantification of several critical parameters, like orientation performance, walking velocities and postural stability, in a natural walking task. The paper presented here mainly focusses on spatial orientation performance quantified by the errors in walking the previously seen path without vision. Errors in length and reaching the corners did not change significantly from pre- to post-flight, while absolute angular errors slightly increased post-flight. The significant decrease in walking velocity and a change in head-trunk coordination while walking around the corners of the path observed post-flight may suggest that during re-adaptation to gravity the mechanisms which are necessary to perform the task have to be re-accomplished.     

The effect of head-down tilt on brain potentials related to visual attention

To study the possible effect of simulated weightlessness on brain function state, the brain event-related potentials (ERPs) in a simple visual selective response task were compared between HDT and HUT in 9 normal subjects. The results were: The Target(T) and non-Target(NT) flash signals both induced significant slow positive potentials which were supposed to related to the attention state; the amplitude of the positive potentials in frontal regions decreased significantly especially for NT-ERPs during HDT comprared with that during HUT. The data reported provide new evidence indicating that more attention should be paid on the brain function study during space flight.     

铸造高温合金熔炼工艺中的冶金原则

文中介绍了苏联铸造高温合金工艺中冶金原则的发展。除去合金化元素之外,杂质元素和微量添加元素是决定合金组织和性能的最重要因素之一。文中详细讨论了在不同条件下它们对合金高温性能的影响。结论中提出改进铸造高温合金冶炼工艺的若干有效的措施。     

绿色制造中的干切削技术

冷却润滑液的存储、使用以及废弃处理需要专门的物流系统,因而费用很高;冷却润滑液处理不当会对人的健康以及环境造成危害;工件经过湿加工后必须进行清洁处理,这都费时费力,同时增加了对系统的要求.基于上述原因,近年来干切削技术受到广泛关注.     

基于CFD技术的鼻腔输药的流动特性研究

鼻腔输药作为一种新颖的输药方式,具有方便可靠的特点,不仅可以适用于局部而且适用于全身用药,已经受到广泛的重视。但由于人类的呼吸道复杂的立体结构使得鼻腔输药成为生物医药研究的一个长期的挑战。利用CFD(计算流体动力学,Computational Fluid Dynamics)技术对鼻腔输药的流动特性进行研究,对一个基于真实的人类鼻腔解剖的3D模型的输药的流动过程进行了分析,着重研究了不同的药物颗粒的流动和沉淀特性。利用CFD的商用软件FLUENT在层流情况下对不同的密度、直径和流动速率的药物颗粒在鼻腔中流动进行了数值模拟,并对计算结果进行了比较分析。CFD研究的结果为鼻腔输药这种新颖的药物输送方式的优化设计提供了依据。     

自主式机械面密封的标准化——密封件主要技术数据的计算

本文论及的自主式机械面密封件已在НИИСУ(俄罗斯航空标准化统一化研究所 )进行了设计和试验 ,并指定用于航空技术产品。在已往所开展工作的基础上 ,系列标准ОСТ1 1 3792 -80～ОСТ1 1 380 1 -80开始在航空行业内实施。这些标准包含了机械面密封结构及其零组件的典型结构和尺寸。本文还给出了机械面密封结构的计算方法 ,示出了压力和作用力型谱 ,因而人们可以了解作用在上述密封结构的零组件 ,如碳圈、波形弹簧、橡胶圈上的力。本文给出的数学公式可用于计算波形弹簧的主要特性、确定橡胶圈和滑动表面之间的摩擦力、确定接触部分的作用力、确定参数PcV、计算碳圈的强度及其由工作液压力引起的变形。本文给出了安装在直径为 2 5、35和 45mm轴上的机械面密封结构的计算示例     

DO 28飞行试验数据一致性检验

 本文研究DO28试验机飞行试验数据一致性检验及其误差校正。建立了由非线性运动学方程及内容广泛的校正环节构成的一致性检验模型,解决了大地风场重构、测量信号时间延迟估计、ψ转换及测量控制信号的校正。为DO28参数估计提供了可靠、准确的飞行试验数据。