面向立方星的相对位姿测量视觉传感器设计

针对立方星在轨服务任务中的近距离相对导航问题,提出一种相对位姿测量视觉传感器设计.为应对空间复杂的光照条件,设计一种具有多层结构的立体靶标,选取波长为850nm的LED灯作为立体靶标的光源.在相机镜头处安装850nm的红外窄带滤镜以提高立体靶标成像质量.为提高视觉传感器的测量精度,提出一种迭代直接求解(iterativ...     

Debut Flight Of LM-3C:Launching Tianlian-1 Successfully

FY-3A,the first satellite of China's new generation of polar-orbiting meteorological satellites,was launched into space atop a modified LM-4C launch vehicle.The satellite separated from the rocket 19 minutes after the takeoff.Flying at an altitude of 807km with an inclination of 98.8 degrees,the satellite circles in polar orbit 14 times everyday,covering the whole globe twice a day. FY-3A has a design lifetime of three years.Weighing 2295kg,the three-axis stabilized satellite is equipped with 11 remote s...     

基于Solid-Works的齿轮参数化设计

由于Solid-Works2003及以前版本的软件,其标准件图库中没有绘制各种齿轮的功能,本文介绍了在Solid-Works中实现参数化齿轮三维造型的一种方法,应用此方法可以在Solid-Works环境下完成齿轮的参数化三维绘制。     

火星车转移坡道柔顺性优化设计及动力学分析

对一种抽展式火星车转移坡道开展柔顺性优化设计和动力学分析。首先,分析火星车与存在异面角的坡道的挤压几何原理。然后,设计坡道的间隙机构和限位机构,并计算出机构关键设计参数的最优值,以自适应调整两侧坡道的距离,〖JP2〗减小火星车与坡道护栏之间的相互作用力。最后,对坡道下落过程和火星车在坡道上的行驶过程进行动力学仿真,验证坡道柔顺性优化设计的效果。结果表明：优化后的坡道柔顺性大幅提高,坡道可以自适应调整两侧的距离;使用优化后的坡道,可以有效降低火星车与坡道护栏的作用力,实现火星车在坡道上的安全行驶。     

Early effects of low dose C ion or X-ray irradiation on human peripheral blood lymphocytes

The aim of this study was to estimate the acute effects of low dose ¹²C⁶⁺ ions or X-ray radiation on human immune function. The human peripheral blood lymphocytes (HPBL) of seven healthy donors were exposed to 0.05 Gy ¹²C⁶⁺ ions or X-ray radiation and cell responses were measured at 24 h after exposure. The cytotoxic activities of HPBL were determined by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT); the percentages of T and NK cells subsets were detected by flow cytometry; mRNA expression of interleukin (IL)-2, tumor necrosis factor (TNF)-α and interferon (IFN)-γ were examined by real time quantitative RT-PCR (qRT-PCR); and these cytokines protein levels in supernatant of cultured cells were assayed by enzyme-linked immunosorbent assays (ELISA). The results showed that the cytotoxic activity of HPBL, mRNA expression of IL-2, IFN-γ and TNF-α in HPBL and their protein levels in supernatant were significantly increased at 24 h after exposure to 0.05 Gy ¹²C⁶⁺ ions radiation and the effects were stronger than observed for X-ray exposure. However, there was no significant change in the percentage of T and NK cells subsets of HPBL. These results suggested that 0.05 Gy high linear energy transfer (LET) ¹²C⁶⁺ radiation was a more effective approach to host immune enhancement than that of low LET X-ray. We conclude that cytokines production might be used as sensitive indicators of acute response to LDI.     

典型C/CSi盖板隔热结构优化分析

针对典型环境条件下C/CSi盖板隔热结构进行瞬态有限元传热分析,模拟隔热结构内部的辐射和传导复合传热,建立相应质量分析模型.通过对双层纤维隔热结构进行传热分析,得到隔热层体积比变化对隔热性能的影响规律.针对双层纤维C/CSi盖板隔热结构,以各层纤维材料体积比和厚度值为变量,实现底层结构温度和隔热结构质量的优化.分析发现当质量和隔热层厚度一定时,小体积比薄外层隔热纤维与大体积比厚内层隔热纤维匹配能达到较好隔热效果;而在温度限制条件下,各层纤维体积比相对一致时结构总体质量最轻.     

一种基于OPTICS聚类的仅测角导航目标检测算法

仅测角自主导航方法具有设备简单、复杂度低,功耗低的优点,在空间任务中具有广泛的应用前景.针对中远距离下空间目标特征少的特点,提出了一种利用基于OPTICS聚类算法的空间目标检测方法,可用于仅测角导航过程中的目标检测.对原始星图进行预处理提取星点及目标点,并结合星图识别的结果选择部分帧,使用经过改进的OPTICS聚类方法获得目标运动轨迹.最后,使用本文中的算法对软件仿真出的含有目标的高精度星图进行处理验证了算法的可行性.在卫星相对于空间目标抵近过程中,目标检测的水平误差及垂直误差小于0.15°的帧数分别占到了85.4%以及99.6%.相比AVANTI实验中的目标检测方法,减少了在轨任务中相关参数的调节,进一步提升了算法的自主性.     

PARAMETRIC MODELING OF COMPONENT LIBRARY FOR LANDING GEAR BASED ON CATIA/CAA

The design of landing gear is complicated due to the numerous considered elements.And the initial elements related to each other can also be influenced by different factors.Landing gear design often involves a very large variety of configurations,especially in the conceptual design phase.However,traditional method costs more time to complete the whole procedure for suitable configurations of landing gears.Therefore,the parametric modeling of component library for landing gear based on computer aided three-dimensional interface application/component application architecutre(CATIA/CAA)is proposed.According to the analysis of the characteristics of landing gear components,a method is presented to extract the primary parameters of landing gear components so that a systematic classification can be established.Further,the related theories and methods,including receiving geometrical parameters of the components and updating the parametrical model,displaying the component parts,are also illustrated.Finally,the development technology for component library is explained.The proposed modeling method can improve the efficiency of the whole design cycle for landing gear.     

对高校建立经常性统计数据质量核查制度的思考

文章探讨了在国家教育体制不断改革的情况下,经常性统计数据质量核查制度的内涵,以及高校建立经常性统计数据质量核查制度的必要性,并对高校如何落实经常性统计数据质量核查制度提出了自己的看法.     

多跨转子稳态不平衡响应研究

作者在Lund提出的有阻稳态不平衡响应计算方法的基础上,导出了多跨转子计及轴间套齿联轴器角向刚度C_hx)及C_(hy)的结点传递矩阵,结点左、右转角之间关系可表示为;