微型管状熔断器高电压低气压下熔断特性研究

针对进口空间用FM08系列熔断器在空间低气压环境条件下出现的持续拉弧放电现象,以国产的空间飞行器用微型管状熔断体RSG-I-FFA系列熔断器为研究对象,进行了高电压低气压条件下熔断特性的验证试验。对164只样品进行了不同气压下的高电压大电流试验,试验结果表明,RSG-I-FFA系列熔断器在空间低气压高电压下能可靠熔断,熔断后熔断器外观完整,断点间阻抗大于100 kΩ,可以在空间飞行器上安全使用。     

Prediction of nonlinear pilot-induced oscillation using an intelligent human pilot model

This paper proposes a method to predict nonlinear Pilot-Induced Oscillation (PIO) using an intelligent human pilot model. This method is based on a scalogram-based PIO metric, which uses wavelet transforms to analyze the nonlinear characteristics of a time-varying system. The intelligent human pilot model includes three modules: perception module, decision and adaptive module, and execution module. Intelligent and adaptive features, including a neural network receptor, fuzzy decision and adaptation, are also introduced into the human pilot model to describe the behavior of the human pilot accommodating the nonlinear events. Furthermore, an algorithm is proposed to describe the procedure of the PIO prediction method with nonlinear evaluation cases. The prediction results obtained by numerical simulation are compared with the assessments of flight test data to validate the utility of the method. The flight test data were generated in the evaluation of the Smart-Cue/Smart-Gain, which is capable of reducing the PIO tendencies considerably. The results show that the method can be applied to predict the nonlinear PIO events by human pilot model simulation.     

陀螺电机转子动平衡激光精密去重技术

陀螺电机转子动平衡采用的人工打孔去重存在效率低、去重精度低、金属碎屑残留等问题，严重制约了陀螺的生产效率和精度。而激光去重具有去重精度高、无接触、效率高等优点，在精密去重领域应用前景广泛。采用脉冲光纤激光器对陀螺电机转子动平衡进行了激光精密去重技术研究，探讨了激光频率、振镜扫描速度等参数对去重效果的影响规律，优化了激光去重工艺参数。当激光功率为30W、振镜扫描速度为1000mm/s时，去重盲孔效果最好。针对激光去重盲孔存在残留物问题，提出了激光二次抛光去除残留物的方法，研究了激光功率、振镜扫描速度对残留物去除效果影响规律，优化了激光抛光工艺参数。激光去重盲孔经二次扫描抛光后，盲孔表面残留物去除干净，满足陀螺电机转子的精密去重要求。     

频率稳定度与守时钟组配置关系研究CSCD

通过对中小型守时实验室对时间尺度稳定度的需求分析,以目前主流守时钟5071A为例,利用国际权度局公布的原子钟数据,研究不同钟组配置与时间尺度稳定度的关系,为中小时间实验室守时钟组的优化配置提供参考依据;权重确定是原子时算法的关键之一,通过对不同数量、不同取权规则的原子时计算结果进行统计分析与比较,提出中小时间实验室原子时尺度算法中的取权原则。     

新型三阶TVD限制器性能分析

在计算流体力学(CFD)方法中,限制技术是影响计算精度和计算稳定性的重要因素,目前应用较广的经典二阶总变差衰减(TVD)限制器虽能较好地满足计算要求,但性能差异大且分辨率和耗散的性能间并未得到良好权衡。对一种新型的三阶TVD插值限制器(T-3限制器)进行了研究并将其与3种经典限制器进行对比。首先通过一维黎曼问题,得出T-3限制器兼顾较高间断分辨率和良好稳定性的特点;接着通过高超声速双锥绕流和X-33外形飞行器的数值实验,得到T-3限制器具有刻画复杂流动的能力以及较优的气动热计算性能。     

民用运输类飞机最小机组工作量评估中的评估机组选取研究

研究了民用运输类飞机最小机组工作量评估中的评估机组选取问题。通过比较不同飞行人员的服役经历、背景及其在最小机组工作量评估中的差异,给出了一套可行的最小机组工作量评估机组的选取原则。     

Electrochemical micromachining of microgroove arrays on phosphor bronze surface for improving the tribological performance

A high friction coefficient and a low wear rate of contacted surfaces are essential elements to friction pairs between the stator and the rotor in ultrasonic motors. It has been shown that surface textures have a significant effect on improving the tribological performance of friction pairs.In this paper, microgroove arrays are introduced to the stator surface for improving the tribological performance of friction pairs between the stator and the rotor in ultrasonic motors. Microgrooves were fabricated on a phosphor bronze surface by through-mask electrochemical micromachining(TMEMM). Parameters, namely, the electrolyte inlet pressure, applied voltage, pulse duty cycle,and frequency, were varied to investigate their influences on the dimensions and morphology of the microgrooves. Results showed that the width and depth of the microgrooves were strongly affected by the applied voltage and frequency, while the morphology of the microgrooves was dependent on the electrolyte inlet pressure and the pulse duty cycle. Compared with a smooth surface, the friction coefficient increased from 0.245 to 0.334 and less abrasion was obtained when a surface was textured with microgrooves of which the width and depth were 185.6 and 57.6 lm,respectively. Microgroove arrays might play an important role in enhancing the performance of ultrasonic motors.     

行星车视觉导航与自主控制进展与展望

以视觉为主的行星车自主地形感知、导航、规划与控制系统是其安全高效探测的重要保障。本文通过对已成功开展和计划中的系列行星车任务导航与控制系统进行汇总，重点梳理了行星车多源地形感知、自主全局和局部导航、自主路径规划与控制等若干关键问题的进展情况，展望了未来自主化、智能化的发展趋势，并结合任务需求构建了行星车视觉导航与自主控制研究框架设想。     

轮胎参数对双轮式起落架刹车耦合振动影响研究

目前对飞机起落架低频刹车耦合振动问题的研究主要停留在考虑轮胎参数影响的起落架纵向单自由度振动特性分析，对于多自由度低频刹车耦合振动的特性研究不足。基于Simcenter 3D 动力学分析软件建立双轮支柱式起落架刚柔耦合整机滑跑刹车分析模型，研究轮胎竖向刚度和侧偏刚度对双轮支柱式起落架低频刹车纵向、横向和扭转的多自由度耦合振动的影响。结果表明：轮胎的竖向刚度对起落架横向和扭转方向上的振动影响较大，轮胎竖向刚度变化33%，横向和扭转方向上的振动变化5% 左右；轮胎的侧偏刚度对起落架低频刹车横向上的振动影响较大，轮胎侧偏刚度变化33%，横向上的振动变化15% 左右。