某型号机襟翼机构摩擦磨损可靠性分析与计算(英文)

本文应用空间机构的建模方法建立了某型号机襟翼机构运动的数学模型。当给出输入参数时，可通过此数学模型求出襟翼机构的理论输出参数。输入参数相同时，通过引入摩擦磨损量至数学模型可获得襟翼机构的实际输出参数，并在此基础上求得襟翼机构的摩擦磨损可靠性。     

空间运输飞行器材料与制造技术需求分析

空间运输飞行器已经成为国际航天技术新的发展趋势,对材料和制造技术从两方面提出了新的需求:异形贮箱制造技术和热控材料与制造技术。本文对这两个问题进行了分析,结果表明:异形贮箱和热控硬件的材料与制造是制约空间运输飞行器发展的基础技术,必须在空间运输飞行器研制热潮之前先期突破。     

旋翼着陆器在火星探测中的研究进展

旋翼着陆器是下一轮国际火星探测的重要发展方向.论文首先回顾了火星探测软着陆的发展概况,分析了旋翼着陆器的结构组成、火星探测工作原理及特点.其次,阐述了开展旋翼着陆器设计过程中所需的关键技术.     

Optimization of beamforming and path planning for UAV-assisted wireless relay networks

Recently, unmanned aerial vehicles （UAVs） acting as relay platforms have attracted considerable attention due to the advantages of extending coverage and improving connectivity for long-range communications. Specifically, in the scenario where the access point （AP） is mobile, a UAV needs to find an efficient path to guarantee the connectivity of the relay link. Motivated by this fact, this paper proposes an optimal design for beamforming （BF） and UAV path planning. First of all, we study a dual-hop amplify-and-forward （AF） wireless relay network, in which a UAV is used as relay between a mobile AP and a fixed base station （BS）. In the network, both of the AP and the BS are equipped with multiple antennas, whereas the UAV has a single antenna. Then, we obtain the output signal~to-noise ratio （SNR） of the dual-hop relay network. Based on the criterion of maximizing the output SNR, we develop an optimal design to obtain the solution of the optimal BF weight vector and the UAV heading angle. Next, we derive the closed-form outage probability （OP） expression to investigate the performance of the dual-hop relay network conveniently. Finally, computer simulations show that the proposed approach can obtain nearly optimal flying path and OP performance, indicating the effectiveness of the proposed algorithm. Furthermore, we find that increasing the antenna number at the BS or the maximal heading angle can significantly improve the performance of the considered relay network.     

Aeroelastic two-level optimization for preliminary design of wing structures considering robust constraints

An aeroelastic two-level optimization methodology for preliminary design of wing struc- tures is presented, in which the parameters for structural layout and sizes are taken as design vari- ables in the first-level optimization, and robust constraints in conjunction with conventional aeroelastic constraints are considered in the second-level optimization. A low-order panel method is used for aerodynamic analysis in the first-level optimization, and a high-order panel method is employed in the second-level optimization. It is concluded that the design of the abovementioned structural parameters of a wing can be improved using the present method with high efficiency. An improvement is seen in aeroelastic performance of the wing obtained with the present method when compared to the initial wing. Since these optimized structures are obtained after consideration of aerodynamic and structural uncertainties, they are well suited to encounter these uncertainties when they occur in reality.     

温度对液体中超声速度的影响

本文导出了超声波速度同液体压缩系数及密度关系，研究了压缩系数及密度与温度的关系，进而研究了温度对声速及声时的影响，用实验测量了不同的液体成份下的声时同温度的关系，从而提出了进行液体成份分析所必需的参量，对用超声波分析液体成份提供了理论依据，对提高产品质量及实现工业在线检测有一定的实用价值。     

场独立-场依存认知风格对大学英语听力教学的影响

认知风格与语言学习任务具有显著的相关性。本文根据英语学习者场独立-场依存认知风格在听力理解中表现出来的不同特点,提出不同的大学英语听力教学策略,旨在因材施教,提高学习者的听力能力和语言应用能力。     

人工神经元网络在变压器分接头实时控制中的应用

本文提出了一种利用人工神经元网络实时控制变压器分接头的新方法。研究结果表明该方法具有快速准确等优点，适应电力系统高度自动化的要求，并为变压器分接头实时控制开辟了一条新途径。     

当今山区公路边坡治理新技术

本文介绍我国要对占国土面积一半以上的山区发展经济 ,就必需交通先行 ,而修建山区公路不仅工程艰巨 ,需要大量投资 ,而且由于地形、地质复杂会碰到山坡滑坍、岩石崩塌、路基沉陷变形等主要病害。边坡治理的原则 ,以较多篇幅介绍了目前治理边坡的新技术、新机具、新材料、新工艺等内容     

TDICCD时序设计在FPGA中的工程实现

文章结合TDICCD和FPGA器件特点，主要从设计目标分析，VHDL算法描述、综合、布线、仿真、代码优化、代码测试验证等几方面，阐述了TDICCD时序设计的全过程；利用同步设计的思想避免了竞争与冒险；利用RC延迟模块实现了时序的精确调整；利用模块化思想提高了代码的可重用性、可测试性、可读性。最终，实现了一个6MHz像元输出速率下能正常工作的TDICCD的成像系统。