Additional Measurements on Pit Shielding for Communications Satellite Earth Stations

This correspondence reports measurements taken in both the 4- and 6-GHz frequency bands of the protection afforded a pit-shielded Earth-station antenna. The measurement program described is an expansion of a previous one and was designed to determine the effects of artificial site shielding for a range of satellite locations rather than a single position.     

Further Results on Multipath Angle Error Reduction Using Multiple-Target Methods

The two-target technique proposed by the author in an earlier paper [1] for reducing radar multipath angle tracking errors has been simulated on a digital computer assuming an actual closed-loop system. When tracking with noise, the technique provides angle error performance which compares quite favorably with the expected performance given in [1] Furthermore, the large bias errors usually encountered in normal monopulse systems at low elevation angles are removed. Results of typical tracks are given, both for the method of [1], and for a modified version of the method which applies primarily to shipboard radar systems. Some results on loss of lock are also presented.     

Synthesis Techniques for a Class of SSB-AM-PM Signals

This paper develops synthesis techniques for a particular type of single-sideband sinusoidal carrier which is phase modulated by a subcarrier. Mathematical expressions for signal efficiency, sensitivity of design to parameter variation, and ratio of peak to average power are derived and incorporated in a computer program. Given the desired power ratios for modulated signal components, the program solves for the corresponding modulation parameters and evaluates signal efficiency, design sensitivity, and peak to average power ratio. A sample signal design is presented for clarity.     

Materials selection for electronic enclosures in space environment considering electromagnetic interference effect

Using low power electronic devices for space applications to reduce the mass and energy consumption has lead to electromagnetic interference (EMI) problem. Electronic enclosures are used to shield electronic devices against EMI. In the past, electromagnetic shielding has been mainly the only criteria considered in electronic enclosure design. However, there are several structural and thermal requirements for selection of shielding materials which should also be taken into account. In this research work, three quantitative materials selection methods, i.e. Digital Logic (DL), Modified Digital Logic (MDL), and Z-transformation, are employed to select the best material from among a list of candidate materials. Composite and metallic electronic enclosures are explored and the best material is selected. Z-transformation method is applicable to both of the considered case studies while DL and MDL can only be used for solving one of them. Z-transformation method ranks aluminum as the first choice among various metallic materials. The wide range of Z-transformation application and its practical results confirm the superiority of Z-transformation method over DL and MDL methods.     

The effects of the solar magnetic polarity and the solar wind velocity on Bz-component of the interplanetary magnetic field

We have studied the effect of both solar magnetic polarity and the solar wind velocity on the Bz-component of the interplanetary magnetic field, IMFBz, for the minimum activity of the solar cycles 21, 22, 23 and 24. We made a statistical study of IMFBz in the first section which is considered as an extension of Lyatsky et al. (2003). They made a statistical study of IMFBz for two periods of minimum solar activity 22 and 23 related to 1985–1987 and 1995–1997 when the solar magnetic field had opposite polarity. Our results seem to be consistent with the results obtained by Lyatsky et al. (2003). We found that there is a dependence of IMFBz on the IMFBx and the solar magnetic polarity for the minimum periods of the selected four solar cycles. In addition, we found that there is a dependence of IMFBz on the solar wind velocity.     

A cosmochemical view of cosmic rays and solar particles

The composition of cosmic rays and solar particles is reviewed with emphasis on the question of whether they are representative samples of Galactic and solar matter. The composition of solar particles changes with energy and from flare to flare. A strong excess of heavy elements at energies below a few MeV/nuc decreases with energy, and at energies above 15 MeV/nuc the composition of solar particles resembles that of galactic cosmic rays somewhat better than that of the solar atmosphere. The elements Ne through Pb have remarkably similar abundances in cosmic ray sources and in the matter of the solar system. The lighter elements are depleted in cosmic rays, whereas U and Th may be enriched or not, depending on whether the meteoritic or solar abundance of Th is used. Two prototype sources of cosmic rays are considered: gas with solar system composition but enriched in elements with Z > 8 during acceleration and emission (by analogy with solar particle emission), and highly evolved matter enriched in r-process elements such as U, Th and transuranic elements. The energy-dependence of cosmic ray composition suggests that both sources may contribute at different energies.Miller Institute Professor, 1972–73.     

Variable Speed Wind Energy Conversion Using Synchronous Machine

A power generation scheme using a synchronous generator with an excitation control system driven by a variable-speed wind turbine is described. The proposed scheme has been analyzed over a wide speed range and under wind gusting conditions. Performance characteristics show that it is feasible to use variable-speed fixed-pitch wind turbines to generate electric power.     

Scanning, Tracking, and Mapping State Variable Estimation Algorithms

Recursive state equation estimation algorithms are derived to determine optimal estimation error covariance and state estimate for a linear dynamic system, driven by time-varying and positionverying (or angle-varying) functions whose a priori covariance are described. Retracing the same trajectory with the system measuring device causes the position varying function to repeat and can significantly reduce estimation errors. Applications for these algorithms include improving accuracy of a position dependent quantity to be mapped, or recursively processing radar or sonar data from repeating scans over the same area. Three types of return path patterns are considered: 1) multiple independent returns, 2) reverse returns, and 3) cyclical returns.     

Optical communication systems for avionics

Avionic information processing and transmission requirements are increasing geometrically, with no end in sight, The only feasible way to meet them is to incorporate fiber-optic communication systems into avionic platforms, Such systems can be employed to replace standard electronic components, to augment existing systems, or to enable new technologies. In this paper, we survey the field of low-power communication systems from the avionics engineering perspective. We review the fundamental merits of optical fiber for information transmission and discuss various information modulation schemes. These modulation techniques determine the performance requirements for laser transmitters, We describe the horizontal- and vertical-cavity semiconductor lasers currently available for these systems, and measure their performance against the additional environmental constraints of avionics platforms. Finally, we outline expected near- and far-term trends in system and device development