飞机电源系统故障诊断方法综述及发展趋势

飞机电源系统是机上一切用电设备的电能来源,其安全性与可靠性至关重要。在环保和高效发展需求的背景下,现代航空工业正在推进以电能为核心的多电/全电飞机技术的研究和应用。电驱动装置和电力电子器件的广泛使用导致飞机电源系统结构的复杂化,对飞机的可靠性、安全性、测试性和维修性提出了更高的要求,研究飞机电源系统的故障诊断技术具有重要意义。首先介绍了飞机电源系统的组成结构和各自功能,概述了飞机电源系统的发展历程,对比了国内外典型电源系统的特征,总结了飞机电源系统中的主要故障模式、故障特点和失效原因,并提出了一种飞机电源健康管理系统的设计架构,然后综述了国内外基于模型和基于数据的故障诊断方法研究进展,从准确度、数据需求量、适用性和实现难易程度等方面评述了各类诊断方法的特点,最后指出了飞机电源系统故障诊断技术面临的挑战和发展趋势。     

载人月球探测月面活动发展设想

载人月球探测是浩大的系统工程,组成复杂,关键技术多,研制周期长,经费投入高,任务风险大.月面活动是载人月球探测任务体现能力、保障安全、提升效益的重要组成部分,必须回答"为什么""去哪里""怎么干"等问题.本文从国内外月球探测历程出发,结合当今世界月球探测领域趋势与局势,从月球战略布局、月球科学内涵开展分析.针对月面驻留...     

首款国产大飞机发动机技术特点及其市场前景浅析

未来20年C919飞机群整体需要5000台份发动机,LEAP-X1C有可能将占到2500～3500台份;而SF-A和SF-B将占到1500～2500台份。这样的市场预测值对于LEAP-X1C与SF-A和SF-B来讲都是相当可观的。     

螺旋桨目标的雷达回波信号相位解缠技术

建立了螺旋桨的雷达回波信号模型。对模型回波信号的相位混叠效应进行了理论分析,讨论了回波相位混叠效应出现的原因,通过模型改进获得了螺旋桨的雷达回波相位的理论表达式。提出插值与可调门限相结合的算法和自适应数值积分算法两种相位解缠方法,分别用于桨叶数为偶数和奇数时的相位解缠。仿真结果表明:两种算法有较高的精度。     

射频阵列仿真系统的目标位置精度分析

射频阵列仿真系统是一种比较理想的导弹武器系统抗干扰试验环境,目标位置精度是射频阵列仿真系统的关键指标。阐述了影响目标位置精度的主要原因,并结合测量数据对其进行分析,为工程应用提供了参考。     

利用流线法决定绕扁长椭球流动分离的位置

本文按照流线法把所测量的扁长椭球的压力分布用于决定涡层型三维流动分离,按边界层边缘处流线会聚的位置近似地决定分离线的位置。作为算例,计算了扁长椭球体在α=30°状态下的绕流,并在水洞中作了流场显示,数值结果和实验结果的对比表明,二者十分一致。分析表明,涡层型分离不仅与壁面极限流线的收敛有关,而且还与边界层边缘处流线会聚有关,前者的出现并不是引起涡层型流动分离的充要条件。     

Radio fine structures in dm–cm wavelength range associated with magnetic reconnection processes

Radio bursts with fine structures in decimetric–centimetric wave range are generally believed to manifest the primary energy release process during flare/CME events. By spectropolarimeters in 1–2 GHz, 2.6–3.8 GHz, and 5.2–7.6 GHz at NAOC/Huairou with very high temporal (1.25–8 ms) and spectral (4–20 MHz) resolutions, the zebra patterns, spikes, and new types of radio fine structures with mixed frequency drift features are observed during several significant flare/CME events. In this paper we will discuss the occurrence of radio fine structures during the impulsive phase of flares and/or CME initiations, which may be connected to the magnetic reconnection processes.     

FAST FEATURE RANKING AND ITS APPLICATION TO FACE RECOGNITION

A fast feature ranking algorithm for classification in the presence of high dimensionahty and small sample size is proposed. The basic idea is that the important features force the data points of the same class to maintain their intrinsic neighbor relations, whereas neighboring points of different classes are no longer to stick to one an- other. Applying this assumption, an optimization problem weighting each feature is derived. The algorithm does not involve the dense matrix eigen-decomposition which can be computationally expensive in time. Extensive exper- iments are conducted to validate the significance of selected features using the Yale, Extended YaleB and PIE data- sets. The thorough evaluation shows that, using one-nearest neighbor classifier, the recognition rates using 100-- 500 leading features selected by the algorithm distinctively outperform those with features selected by the baseline feature selection algorithms, while using support vector machine features selected by the algorithm show less prominent improvement. Moreover, the experiments demonstrate that the proposed algorithm is particularly effi- cient for multi-class face recognition problem.     

安全阀性能检测系统的测量不确定度

分析了安全阀性能检测系统中的主要误差因素，对安全阀动作性能和排量系数的测量不确定度进行了初步计算。     

A novel approach for predicting inlet pressure of aircraft hydraulic pumps under transient conditions

Cavitation caused by insufficient suction is a major factor that influences the life of aircraft pumps. Currently, pressurizing the tank can solve the cavitation problem under steady large-flow conditions. However, this method is not always effective under transient conditions (from zero flow to full flow in a very short time). Moreover, to apply and design other measures, such as a boost impeller, the suction dynamics during the transient period must be investigated. In this paper, a novel approach based on the pressure wave propagation theory is proposed for predicting the inlet pressure of an aircraft pump under transient conditions. First, a dynamic model of a typical aircraft pump is established in the form of differential equations. Then, the transient flow model of the inlet line is described using momentum and continuity equations, and the governing equations are discretized by the method of characteristics and the finite difference method. The simulated results are in good agreement with the results from verification tests. Further simulation analysis indicates that the wave velocity and transient time may influence the inlet and reservoir pressure as well as the size of the inlet line. Finally, solutions for upgrading the inlet pressure are discussed. These solutions provide guidelines for designing inlet installations.