喷管扩张段烧蚀的“台阶效应”计算

当喉衬和扩张段内衬采用具有不同烧蚀率的材料时,常出现“台阶效应”.本文以气动热化学烧蚀机理为基楚,提出应用适当的对流换热和加剧的化学反应计算对台阶效应区进行修正的方法,使台阶效应区的烧蚀率预示更切合实际工况.     

液氢贮箱停放过程中的力热分析

为了寻找到运载火箭长时间停放过程中液氢贮箱的最经济液位，用于制定合理的发射流程以及紧急处置方法，采用计算流体力学(CFD)技术，对某型运载火箭停放期间液氢贮箱的力、热情况进行了仿真计算和分析。计算选用了VOF(Volume-of-fluid)两相流模型以及Lee相变模型，为了提高Lee模型在不同压力情况下对相变过程的模拟精度，采用安托因方程修正了该模型。修正后的模型首先由试验数据校验了其精确性，随后开展的液氢贮箱停放过程仿真结果表明：贮箱的竖直方向与径向均存在温度分层的现象，液相内会形成大的漩涡，该漩涡会使得冷热流体不断进行热交换，并导致贮箱内部的液氢出现气化。贮箱停放期间蒸发率最大值超过2 m 3/h，发生在停放4 h左右；而贮箱液位充填至37 m 3以上或17 m 3以下时蒸发率较低，最小值接近1 m 3/h。     

精密露点仪标准装置的性能测试及计量软件设计

文章介绍了以373型精密露点仪为主标准器的湿度标准装置的原理及构成,对该装置的重复性和稳定性进行了测试。结果表明温度重复性实验的标准偏差为0.00℃,相对湿度重复性实验的标准偏差为0.07%RH,露点温度重复性实验的标准偏差为0.01℃。温度稳定性实验的标准偏差为0.02℃,相对湿度稳定性实验的标准偏差为0.33%RH,露点温度稳定性实验的标准偏差为0.066℃。基于美国NI公司的Labview软件开发平台,开发了湿度仪器仪表计量软件。软件以模块化思想为基础,可实现数据自动处理,报告自动生成。     

Aircraft nonlinear stability analysis and multidimensional stability region estimation under icing conditions

Icing is one of the crucial factors that could pose great threat to flight safety,and thus research on stability and stability region of aircraft safety under icing conditions is significant for control and flight.Nonlinear dynamical equations and models of aerodynamic coefficients of an air craft are set up in this paper to study the stability and stability region of the aircraft under an icing condition.Firstly,the equilibrium points of the iced aircraft system are calculated and analyzed based on the theory of differential equation stability.Secondly,according to the correlation theory about equilibrium points and the stability region,this paper estimates the multidimensional stability region of the aircraft,based on which the stability regions before and after icing are compared.Finally,the results are confirmed by the time history analysis.The results can give a reference for stability analysis and envelope protection of the nonlinear system of an iced aircraft.     

《客舱服务技能》课程教学的改进与思考

《客舱服务技能》是空乘专业的一门专业必修课程。在课程改革中,如何改进《客舱服务技能》的教学效果是我们需要关注的重点。本文从目前该课程发展状况、师资、教材、实训条件、教学方法等方面对该课程的建设情况及存在的问题进行了分析与探讨。     

Measurements of heat transfer and pressure in a trailing edge cavity of a turbine blade

 An experimental investigation is conducted to obtain the heat transfer and pressure drop data for an integral trailing edge cavity test section that simulates a novel turbine blade's internal cooling passage with bleed holes. Local heat transfer is measured on both the suction and pressure sides by a transient liquid crystal technique, while pressures at six positions are recorded by pressure calibrators. Moreover, flow characteristic and its effect on heat transfer are analyzed for conditions with or without bleed flow. The experimental results show that, in the cases with bleed flow, local heat transfer on the pressure side exceeds that on the suction side in the first and second channels. In the cases without bleed flow, in the first and third channels, local heat transfer on the suction side weakens whilst it increases significantly on the pressure side. For the second channel, non-bleed condition leads to a more balanced heat transfer distribution between the upstream and downstream channel. Besides, after the bleed holes are blocked, heat transfer in the first bend region on the suction side declines sharply, while the opposite phenomenon occurs for the second bend region on the pressure side. In both bleed and non-bleed cases, the total pressure of six measurement positions decreases continuously along the channel at the same Reynolds number and it promotes for higher Reynolds number. Among all the measurement points, under the same flow rate condition, the highest speed occurs at Position 5, which also shows the maximum difference between the total and static pressures. When the bleed holes are blocked, the total pressure at each measurement position appears to increase.     

全面生产率管理

全面生产率管理是一种改进生产率的独特方法。笔者在阐明全面生产率管理基本思想的基础上，用一系列直观的图表，说明了如何对企业生产率现状进行诊断以及如何实施全面生产率管理。     

低温氢气排放过程数值模拟

以低温氢气安全排放为目的,采用数值模拟方法对低温氢气直接排放和燃烧排放的流场进行分析.流场仿真计算采用了标准双方程k-ε湍流模型和氢氧单步燃烧模型.研究参数包括氢排放压力、流量、温度和环境风速,评价指标为氢扩散范围和燃烧范围.计算结果表明：燃烧排放燃烧范围小于直接排放氢扩散范围;排放压力增加、流量增大和温度降低均会使氢扩散范围和燃烧范围变大.     

试验电缆发热对热设计验证的影响分析

试验电缆发热是航天器热平衡试验中一个难以消除的附加影响因素,常对热设计的正常验证造成很大干扰,分析其影响是保证热平衡试验验证正确有效的一项重要措施。针对试验电缆发热对试验结果及热设计验证的影响,文章以我国海洋-2(HY-2)卫星散射计探测头部热平衡试验为例,提出了一种定量分析的方法,并描述了对其影响进行分析和予以消除的具体过程。通过讨论散射计探测头部热平衡试验的特点,以及具有类似特点的系统级和部件级热平衡试验的情形,归纳了试验电缆发热定量分析的具体实施方式,并总结了适用于定量分析的热设计验证试验的特点。在轨遥测数据表明,定量分析的方式可正确有效地评估试验电缆发热的影响,修正后的计算模型可对在轨温度进行准确的预示。