纵向加速流场中风速管系数的理论修正

基于理想不可压轴对称位流理论，求得一任意椭球在纵向加速流场中绕流的精确解。并以一根细长的棉球近似模拟风速管，求得均匀流中风速管系数理论值，以及在纵向加速流中它的相对偏差值。以两个长细比各为32和250的椭球为算例，得知在一般风洞实验段内存在的速度梯度下，风速管系数的相对偏差量很小。文中表1、表2所列不同加速下风速管系数的相对偏差值，可近似用来修正实际风速管，或根据流场加速程度选择合适的风速管外径的大小。     

三维接触问题的接触状态有限元解法及应用

在文献［１］的基础上论述了有摩擦、有间隙的三维弹性接触问题接触状态有限元解法，并通过理论考题进行了验证。最后，在应用部分对汽轮机汽缸法兰连接汽密性进行了计算。     

角速度波动检测技术研究

标准转台等旋转体在转动时产生的角速度波动对被标定设备的数据可信度有很大影响。本文主要论述了角速度波动检测的重要性和可能性，并对检测的方法进行了介绍，用时域等信号处理方法对角速度波动数据进行了分析。     

A novel method for importance measure analysis in the presence of epistemic and aleatory uncertainties

For structural systems with both epistemic and aleatory uncertainties, research on quantifying the contribution of the epistemic and aleatory uncertainties to the failure probability of the systems is conducted. Based on the method of separating epistemic and aleatory uncertainties in a variable, the core idea of the research is firstly to establish a novel deterministic transition model for auxiliary variables, distribution parameters, random variables, failure probability, then to propose the improved importance sampling(IS) to solve the transition model. Furthermore,the distribution parameters and auxiliary variables are sampled simultaneously and independently;therefore, the inefficient sampling procedure with an ‘‘inner-loop' for epistemic uncertainty and an‘‘outer-loop' for aleatory uncertainty in traditional methods is avoided. Since the proposed method combines the fast convergence of the proper estimates and searches failure samples in the interesting regions with high efficiency, the proposed method is more efficient than traditional methods for the variance-based failure probability sensitivity measures in the presence of epistemic and aleatory uncertainties. Two numerical examples and one engineering example are introduced for demonstrating the efficiency and precision of the proposed method for structural systems with both epistemic and aleatory uncertainties.     

Formability enhancement in hot spinning of titanium alloy thin-walled tube via prediction and control of ductile fracture

The damage and fracture in hot spinning of titanium alloy is a very complex process under the combined effects of microstructure evolution and stress state. In this study, their dependences on processing parameters were investigated by an integrated FE model considering microstructure and damage evolution, and revealing the effects of microstructure and stress states on damage evolution. The results show that the inner surface of workpiece with the largest voids volume fraction is the place with...     

Lightweight Design of Spaceborne CFRP Rigid Antenna Reflector

In order to overcome the shortcoming of space-borne rigid antenna reflector made of carbon fiber reinforced plastic (CFRP) skins with aluminum honeycomb sandwich (SAHS) structure, a new type of full CFRP skin plus rib (SPR) structure ring-focused parabolic surface antenna reflector with the size of 2.5 m 1.9 m is designed. Under the condition that the original caliber, surface type, and interface remain unchanged, the main influence factors are designed and controlled. First, from the perspective of high stiffness, lightweight, and easy to form, a finite element simulation software is used to analyze and optimize the layout of the rib, the cross-sectional shape of the rib, the size of the rib, and the matching of the size and the coefficients of thermal expansion (CTEs) of the rib and the skin. Second, two structures are prepared by the autoclave molding process. Third, the weight and the surface precision root mean square (RMS) value are measured. The results show that the fundamental frequency of the SPR structure is 142.2 Hz, which is 3.5 Hz higher;the number of the new structural parts is reduced by 40%, and the forming process is greatly simplified. The total weight of the new structure is 11.9 kg, lighter 42.5%, indicating that the weight loss is obvious. The RMS value is 0.15 mm, which is slightly lower 0.01 mm but satisfies the accuracy requirement not greater than 0.3 mm. It is proved that the SPR structure reflector is a superior structure of the lightweight spaceborne antenna reflector.     

民用飞机融合式翼梢小翼优化设计

民用飞机性能的提高将在很大程度上依赖于降低空气阻力。在巡航状态下,如果能减小机翼的诱导阻力,则全机的减阻效果将会得到很明显的提高。因此,本文以民用飞机机翼为设计平台,通过加装融合式翼梢小翼来减阻,并在设计了初始小翼的基础上,将减阻作为设计目标,对翼梢小翼的平面几何形状进行优化,并对结果进行了流动机理分析。     

空中运动目标的识别和跟踪控制

针对空中运动目标的识别和跟踪,提出图像匹配算法和连通域算法相结合的方法。该方法主要用图像匹配算法获得目标的位置信息,当图像匹配算法失效时,则采用连通域算法重新捕获目标、获得图像模板。同时,为提高跟踪的实时性,采用最小二乘线性预测法来预测目标的运动轨迹。在实验室的目标跟踪系统平台上,该方法能够对运动目标进行稳定的识别和跟踪。     

Optimization of structural parameters for elliptical cross-section spiral equal-channel extrusion dies based on grey theory

The elliptical cross-section spiral equal-channel extrusion (ECSEE) process is simulated by using Deform-3D finite element software. The ratio m of major-axis to minor-axis length for ellipse-cross-section, the torsion angle u, the round-ellipse cross-section transitional channel L1, the elliptical rotation cross-section transitional channel L2 and the ellipse-round cross-section transitional channel L3 are destined for the extrusion process parameters. The average effective strain eave on cross-section of blank, the deformation uniformity coefficient a and the value of maximum damage dmax are chosen to be the optimize indexes, and the virtual orthogonal experiment of L16 (45) is designed. The correlation degree of the process factors affecting eave, a and dmax is analyzed by the numerical simulation results using the weights and grey association model. The process parameters are optimized by introducing the grey situation decision theory and the ECSEE optimal combination of process parameters is obtained: u of 120 , m of 1.55, L1 of 7 mm, L2 of 10 mm, and L3 of 10 mm. Simulation and experimental results show that the material can be refined with the optimized structural parameters of die. Therefore, the optimization results are satisfactory.     

Approaching control for tethered space robot based on disturbance observer using super twisting law

Approaching control is a key mission for the tethered space robot to perform the task of removing space debris. But the uncertainties of the TSR such as the change of model parameter have an important effect on the approaching mission. Considering the space tether and the attitude of the gripper, the dynamic model of the TSR is derived using Lagrange method. Then a disturbance observer is designed to estimate the uncertainty based on STW control method. Using the disturbance observer, a controller is designed, and the performance is compared with the dynamic inverse controller which turns out that the proposed controller performs better. Numerical simulation validates the feasibility of the proposed controller on the position and attitude tracking of the TSR.