粘性对再入锥气动静稳定性的影响

本文研究粘性对四种再入锥：１０度尖锥、１１度小钝锥、小球头三锥体、大球头三锥体在零攻角附近的气动静稳定性的影响。     

转捩诱导法向力及其对细长尖锥气动特性的影响

边界层转捩时,是否会出现诱导法向气动载荷,这是一个很有意义的问题。本文介绍了在高超音速风洞中完成的静态气动力实验与动态气动力实验,它证实这种诱导法向载荷是存在的,是边界层转捩的不对称性造成的,并对细长锥的气动特性有明显而呈规律性的影响。     

基于因子分析和模糊数学方法的公司内在价值评价的实证研究

本文对公司内在价值作了定义 ,系统分析了影响公司内在价值的因素 ,并建立了评价指标体系 ;设计了两种分别基于因子分析法和模糊数学方法的内在价值综合评价方法 ;最后选择了纺织板块上市公司作实证分析 ,比较了两种方法的优劣     

反辐射非相干诱偏时序关系优化设置

有源诱偏是对抗反辐射武器的有效手段。时序关系是影响诱偏效果的重要因素。对时序关系要求做出了分析,进而提出优化时序关系设置的方法。利用反辐射导引头和专用诱偏装置开展了反辐射时序关系影响实验,进行了深入的数据分析工作,得出一些具有重要应用价值的结论。     

Magneto-gravity Waves Trapped in the Lower Solar Corona

The possibility of trapped magneto-gravity waves in the lower solar corona with an open magnetic field is discussed. Intensity variations and/or Doppler shifts of relevant UV, EUV and x-ray spectral lines in the chromosphere, transition region and lower corona may reveal the existence of such low-frequency modes (with periods longer than ∼ 1.5 hour). The spectrum may be either discrete or continuous depending on the reflection property of the narrow transition region. These modes can be utilized to probe the dynamics of the upper chromosphere, transition region and lower corona; they may also play an important role in coronal heating. This revised version was published online in June 2006 with corrections to the Cover Date.     

FMS通信技术和制造信息服务研究与开发

以柔性制造系统FMS-500为应用背景,提出了在工业控制实时局域网基础上适合FMS实时控制和信息集成需求的通信体系结构,并以加工中心为例介绍了底层设备FMS通信接口和制造信息服务的设计与开发.     

多工位同步加工电火花线切割机床研制

在民用和军工领域存在许多环状工件需要分块切割,但现有电火花线切割加工方法效率低、内应力大,通过发明、制造了一种圆形多工位同步加工的电火花线切割机床,采用一根电极丝在机床不同位置,对环状工件同步进行径向切割。介绍了机床总体结构设计、电源研制、控制系统开发,并通过工艺试验验证了机床的可行性。     

大型飞机装配中的数字化测量系统分析和研究

飞机制造技术迅猛发展,其数字化测量技术在飞机装配中的作用越来越重要,地位越来越凸显.采用数字化测量系统不仅可以大幅度提升现代飞机装配的质量和效率,而且更能适应上层的飞机数字化设计,打通从设计、制造到装配的数字化、一体化流程.     

10°尖锥转捩诱导负荷的实验研究

当θｃ＝１０°之尖锥边界层出现转捩流态时，由于背风面与迎风面边界层转捩的不对称性所诱导的气动负荷，包括诱导法向力，诱导俯仰力矩，以及诱导法向力的作用点要随雷诺数而变化，转捩诱导法向力的存在，证实边界层转捩会在物面上诱导出压力增量，即存在着转捩诱导压力。     

Seismic deformation of the Mw 8.0 Wenchuan earthquake from high-rate GPS observations

High-rate GPS positioning has been recognized as a powerful tool in estimating epoch-wise station displacement which is particularly useful for seismology. In this study, station displacements during the 12 May 2008 M_w 8.0 Wenchuan earthquake are derived from the 1-Hz GPS data collected at a set of stations in China. The impacts of integer ambiguity resolution and station environment-dependent effects are investigated in order to yield more accurate results. The position accuracy of horizontal components of better than 1 cm suggests that GPS can sense the rapid position oscillation of about 2 cm in amplitude. Temporal and spatial analysis is applied to the surface displacement at station XANY and the characteristics of the movements due to Rayleigh and Love waves are detected and discussed. The comparison of GPS-derived displacement with relevant synthetic data computed based on a recently published rapture model shows a reasonable agreement in waveform. The various differences in amplitude need further investigation and also imply that rapture inversion might be improved if GPS-derived displacement is assimilated.