管中激光加速器的推力形成过程

管中激光加速器是一种新型的激光推力器,弹射体在管道中被加速。利用光线追踪法,根据光线在网格中的传播路径信息,运用辐射输运方程,得到流场的能量源项;数值求解含能量源项的流体控制方程,对管道中等离子体流场激波的形成和演化过程进行了研究。模型能够模拟空气光学击穿、空气对激光能量的吸收、等离子体对激光的屏蔽作用和推力形成过程,通过计算得到冲量耦合系数为3.61×10-4N/MW,等离子体内能转化为流场动能的比例约为9%。     

控制策略对无轴承开关磁阻电机

分析了无轴承开关磁阻电机(BSRM)的3种负载控制策略(方波控制策略、最小磁势控制策略和平均悬浮力控制策略),以及每种策略下由悬浮力方程和转矩方程求解超前角和绕组电流的方法。由于控制对象和求解过程所引入约束条件的不同,即便相同负载状况时,3种控制策略求取的超前角和绕组电流结果也不同。利用瞬态有限元法获得了电机的动态磁密分布,并研究了3种控制策略下电机分别表现出的磁场特性。通过双频法分离铁损,分别计算了3种控制策略在不同转速时的电机涡流损耗和磁滞损耗,给出了电机铁心各部分损耗随转速变化的关系,由此得到了3种控制策略对铁心损耗的影响。     

适于黏性计算的自适应笛卡儿网格生成及其应用

复杂外形的黏性网格生成已经成为计算流体力学(CFD)在工程应用中的主要瓶颈,高效而鲁棒的网格生成技术研究显得尤为迫切。使用基于物面外形自适应加密的笛卡儿网格方法生成计算网格,投影方法拟合壁面边界,将投影得到的柱形单元沿法向分层获得适于黏性计算的网格。应用特征恢复技术恢复凹面特征并改善凸面处的网格质量。流场解算中应用最小二乘法重构获得2阶精度,Roe格式计算无黏通量,Holmes-Connell方法计算黏性通量。加入Spalart-Allmaras一方程湍流模型以获得湍流解。上下对称高斯 赛德尔迭代(LU-SGS)格式隐式时间推进,对网格重排序保证格式的稳定性和平衡性。算例显示网格生成方法是快速的和鲁棒的,流场计算精度满足工程需求,因此该方法非常适合应用于实际工程计算。     

惯性/星光/卫星组合导航系统可视化仿真研究及实现

组合导航可视化仿真是验证多传感器组合导航方案、算法正确性和可靠性的有效手段,可以通过曲线、图形的方式对多传感器组合导航过程进行三维直观演示。为充分验证所提出的惯性/星光/卫星多传感器组合导航系统的精度和可靠性,本文设计了基于VC++的多传感器组合导航的算法可视化仿真验证系统,采用任务分离技术分配主辅线程实现界面显示和算法运算并行工作,同时利用API函数实现高效、高速的串口传输和界面显示,提高系统的实时性。实验结果表明,本文设计的系统可以满足多传感器组合导航系统可视化仿真演示的需要,运行稳定可靠。     

基于响应面近似技术的平流层飞艇协同设计优化

针对平流层飞艇多学科设计优化问题,引入协同优化算法,分析基于响应面近似模型的协同优化方法CO/RSA的执行步骤和特点,并介绍响应面近似模型的构建方法;建立平流层飞艇各学科模型,并对学科间耦合关系进行分析;运用建立的气动/推进、结构、能源三个耦合子系统的学科分析模型和系统优化模型,以平流层飞艇总质量最小为优化目标,综合考虑浮重、推阻和能源平衡,采用CO/RSA方法对平流层飞艇进行设计优化.结果表明:所建立的平流层飞艇的MDO模型是合理的,CO/RSA算法应用于飞艇总体设计优化是有效的,研究结果可为平流层飞艇方案论证和方案设计提供参考.     

Effect of sodium tartrate concentrations on morphology and characteristics of anodic oxide film on titanium alloy Ti–10V–2Fe–3Al

The effect of sodium tartrate concentrations on morphology and characteristics of ano-dic oxide film on titanium alloy was investigated. The alloy substrates were anodized in different concentration solutions of sodium tartrate with the addition of PTFE emulsion and their morphol-ogy and characteristics were analyzed. The anodic oxide film presented a uniform petaloid drums and micro-cracks morphology. Additionally, micro-cracks dramatically swelled with the increase of the tartrate concentrations. The thickness of the anodic oxide film increased with the concentra-tions until the concentration reached 15 g/L. The results of Raman analysis illustrate that all sam-ples have similarity in the crystal structure, consisting of mainly amorphous TiO2, some anatase TiO2 and a small amount of rutile TiO2. And the ratios of anatase TiO2 and rutile TiO2 increase with the concentrations until it reaches 15 g/L. Furthermore, the intensity of the peaks increases with enhanced concentrations until the concentration reaches 15 g/L. The corrosion resistance of the anodic oxide film is increased by the sodium tartrate with higher concentrations before 15 g/L. The coefficient of friction of the anodic oxide film reduces with the concentrations until the concentration reaches 15 g/L, then the coefficient of friction of the anodic oxide film increases with the concentrations.     

An equivalent ground thermal test method for single-phase fluid loop space radiator

Thermal vacuum test is widely used for the ground validation of spacecraft thermal control system. However, the conduction and convection can be simulated in normal ground pressure environment completely. By the employment of pumped fluid loops’ thermal control technology on spacecraft, conduction and convection become the main heat transfer behavior between radiator and inside cabin. As long as the heat transfer behavior between radiator and outer space can be equivalently simulated in normal pressure, the thermal vacuum test can be substituted by the normal ground pressure thermal test. In this paper, an equivalent normal pressure thermal test method for the spacecraft single-phase fluid loop radiator is proposed. The heat radiation between radiator and outer space has been equivalently simulated by combination of a group of refrigerators and thermal electrical cooler(TEC) array. By adjusting the heat rejection of each device, the relationship between heat flux and surface temperature of the radiator can be maintained. To verify this method,a validating system has been built up and the experiments have been carried out. The results indicate that the proposed equivalent ground thermal test method can simulate the heat rejection performance of radiator correctly and the temperature error between in-orbit theory value and experiment result of the radiator is less than 0.5 C, except for the equipment startup period. This provides a potential method for the thermal test of space systems especially for extra-large spacecraft which employs single-phase fluid loop radiator as thermal control approach.     

商用飞机驾驶舱造型设计特征研究

介绍了国内外商用飞机驾驶舱设计的历史及现状,在分析多类飞机驾驶舱造型设计图片资料的基础上,探讨主要飞机制造商驾驶舱造型设计的特征。依据驾驶舱造型的相似性,对国际上12家商用飞机制造商的66款机型的驾驶舱进行聚类分析和多维尺度分析,挑选出10款有代表性的驾驶舱。在提取代表性驾驶舱造型特征线后,分析主要飞机制造商的驾驶舱造型设计特点及差异,为新型飞机驾驶舱造型设计提供参考。     

美国NASA的适航气动研究及启示

飞机适航管理是以民用航空器为对象的强制性、法规性和技术性飞行安全管理。简述美、欧等世界航空大国飞机适航管理及适航规章;研究美国NASA在飞机适航领域开展的气动研究工作;探讨我国国家空气动力试验机构服务于适航工作的途径。     

一种临近空间升浮一体飞行器气动布局设计研究

应用理论方法和数值模拟方法开展升浮一体太阳能无人机气动布局设计研究,通过优化选形设计获得高升阻比气动布局,对比两种方法的计算结果以及分析存在差别的原因;应用张线天平支撑风洞试验测试技术,对设计布局开展实验验证研究,建立大展弦比的双机身气动布局风洞试验测试方法,分析了不同雷诺数下实验模型的纵向和横向气动特性影响。研究结果表明:风洞试验结果与设计结果吻合良好,验证了设计结果的可靠性,获得了对总体设计具有指导意义的结论和试验数据结果。