RTK model and positioning performance analysis using Galileo four-frequency observations

This paper proposes a real-time kinematic (RTK) model that uses one common reference satellite for the Galileo system with four frequency observations. In the proposed model, the double-differenced (DD) pseudorange and carrier phase biases among the different frequencies are estimated as unknown parameters to recover the integer features of the DD ambiguities among the different frequencies for ambiguity resolution and precise positioning. Analysis results show that the E5a, E5b, and E5 frequencies have virtually the same performance in terms of the positioning accuracy, observation residuals, and ratio values of ambiguity resolution. However, the E1 frequency performs worse than the E5a, E5b, and E5 frequencies. The RTK results for the combination of multiple frequencies are much better than those for a single-frequency observation, the coordinates’ standard deviation is improved about 20–30%, and the ambiguity fix time is improved about 10%.     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

航空航天仿真试验假人研制

介绍了国内航空仿真试验假人的功能要求和研制状况,将研制工作分为人体参数测量、机械结构、信号采集与处理和可靠性验证4个部分进行.重点阐述了仿真试验假人的骨架、关节和皮肤肌肉的材料选择及结构设计特点.传感测试能力可输出记录64路生理信号,整体性能接近美国军用假人ADAM的水平,为高危的载人航空航天装备动态性能试验测试提供了有效工具.     

大功率狭缝式活塞激励器流场测量与分析

研制了一种大功率活塞射流激励器,出口瞬时速度峰值可达0.3Hz,通过对活塞激励器射流流场测量,得到激励器出口流场速度、涡量分布,分析得到激励器合成射流流动结构与特征,通过采用活塞激励器控制同轴射流掺混,实验结果证明此种活塞激励器可以用于相对较高的速度流场的主动流动控制.利用提出的设计方法设计合成射流激励器可以在激励器出口形成稳定的对涡结构,采用一定的激励频率即可对喷管气流掺混进行有效控制.研究表明,合成射流激励器作为主动流动的执行机构,在航空动力排气系统具有潜在的重要价值.     

新型电子束焊机阴极加热电源自动调节系统

开发了一种新型电子束焊机阴极加热电源自动调节系统,包括新型主电路拓扑和对应控制策略,该系统能够使阴极处在最佳加热电流状态,从而提高电子束流稳定性.并且在检测到电子枪未加高压时,阴极加热电流自动关闭,在加有高压但束流给定为零时,阴极加热电流自动减少,能大幅增加阴极的使用寿命.经试验证明该系统相比传统阴极加热电源操作简洁、快速和准确,对焊缝成形质量好.     

飞行器航迹倾角的自适应动态面控制

针对飞行器纵向模型具有参数不确定性和外界干扰的特点,提出一种飞行器航迹倾角的自适应动态面控制方法.动态面控制方法通过引入一阶低通滤波器避免了传统反演设计存在的"微分爆炸"现象,采用自适应律对模型未知参数进行在线估计,并利用非线性阻尼项克服外界干扰.通过Lyapunov方法证明得出闭环系统半全局一致稳定,跟踪误差可通过调节控制器参数达到任意小.仿真结果表明:该方法能在简化控制设计过程的同时保证航迹倾角跟踪上预定轨迹,控制系统具有较强的自适应能力且对外界干扰具有一定的鲁棒性.     

基于分层介质模型的HF雷达高度计火星回波仿真研究

火星次表层中的水探测是当前深空探测领域中的热门问题之一. 高频(HF)雷达高度计具有较强的穿透能力, 且能同时实现距离和功率测量, 是火星次表层探测的重要手段. 介绍了高频雷达高度计系统的原理和设计, 通过分析高度计电磁脉冲与多层光滑介质之间的相互作用, 得出其回波功 率随时间变化的模型, 并考虑了表面粗糙度对表面回波功率的影响. 选用典型的火星分层介质模型, 对其介电常数特性和高度计回波波形 进行了仿真. 仿真结果表明, 采用高频雷达高度计系统可实现对火星次表 层介电特性垂直廓线的反演, 对火星中水的识别具有重要 作用.     

组合航天器转动惯量在轨两步辨识标定

在轨辨识转动惯量参数是主动航天器与非合作空间目标构成组合体后实现高精度姿态控制的重要前提,文章提出了一种两步在轨辨识组合航天器转动惯量参数的方法。第一步以航天器本体坐标系滚动轴转动惯量为基准将转动惯量矩阵归一化,得到特殊的转动惯量比矩阵,建立与其相关的姿态动力学模型,提出了基于扩展卡尔曼滤波的在轨辨识算法,基于星上陀螺角速率测量信息在100s左右辨识出所有转动惯量比参数,克服了由于模型简单导致转动惯量信息辨识不完整的缺点;第二步基于第一步辨识得到的转动惯量比参数,采用最小二乘算法辨识得到滚动轴转动惯量值,计算量小,消耗能量少。最后给出仿真算例,辨识精度基本在1|之内,验证了方法的有效性。     

任意曲面上射线的寻迹方法

为计算任意曲面上天线间的隔离度,提出一种射线寻迹的新算法——最小夹角法.首先对任意曲面表面进行三角形网格剖分,并按照文中要求的格式生成模型表面网格数据;用文中提出的"最小夹角法"对上述网格数据进行处理,从而达到快速准确地找出任意曲面上、任意两点间的短程线.求解了位于圆柱体、椭球体及任意组合体上任意两点间的短程线长度,验证了"最小夹角法"的准确性.     

Seismo-ionospheric anomalies in total electron content of the GIM and electron density of DEMETER before the 27 February 2010 M8.8 Chile earthquake

In this paper we examine the pre-earthquake ionospheric anomalies by the total electron content (TEC) extracted from GIM (global ionospheric map) and the electron density (Ne) observed by the DEMETER (Detection of Electro-Magnetic Emissions Transmitted from Earthquake Regions) satellite during the 2010 M8.8 Chile earthquake. Temporal variations show the nighttime TEC and Ne simultaneously increase 9–19 days before the earthquake. A cross-comparison of data recorded during the period of 1 February to 3 March in 2006–2010 confirms the above temporal anomalies specifically appear in 2010. The spatial analyses show that the anomalies tend to appear over the epicenter.