固体发动机试车燃气中HCl和Al2O3扩散研究

对固体火箭发动机试车燃气的组成，抬升和扩散，采用高斯模式与环境监测相结合的方式进行了系统研究，评价了不同大气稳定度下ＨＣｌ和Ａｌ２Ｏ３浓度的分布，提出了有效的防治措施。     

脉冲爆震发动机部分填充效应理论分析

为了研究脉冲爆震发动机的部分填充效应,建立了不依赖于实验数据的通用理论分析模型。将该理论模型得到的计算结果与实验数据进行对比,误差在15%以内。并应用该模型进行了一些算例计算,计算结果表明:部分填充能显著增加比冲,理论比冲最高能接近600s;比冲增益随填充系数的减小而增大,最后趋于某一上限值,计算中,该上限值最高达到4;采用氧气作氧化剂时不仅比采用空气作氧化剂时的比冲更高,而且比冲增益也更大;不可燃气体密度越大,部分填充产生的比冲增益越大;背压降低,部分填充产生的比冲增益也随之减小。     

Singular formalism and admissible control of spacecraft with rotating flexible solar array

This paper is concerned with the attitude control of a three-axis-stabilized spacecraft which consists of a central rigid body and a flexible sun-tracking solar array driven by a solar array drive assembly. Based on the linearization of the dynamics of the spacecraft and the modal identi- ties about the flexible and rigid coupling matrices, the spacecraft attitude dynamics is reduced to a formally singular system with periodically varying parameters, which is quite different from a space- craft with fixed appendages. In the framework of the singular control theory, the regularity and impulse-freeness of the singular system is analyzed and then admissible attitude controllers are designed by Lyapunov＇s method. To improve the robustness against system uncertainties, an H∞ optimal control is designed by optimizing the H∞ norm of the system transfer function matrix. Comparative numerical experiments are performed to verify the theoretical results.     

微结构谐振传感器

阐述了频率输出的新型谐振传感器的发展方向之一——微型化。评价性地论述了热激励硅谐振压力传感器和热激励谐振膜质量流量传感器。重点讨论了热激励的原理,特点等。指出我国应对传感器的这一发展趋势给予足够的重视。     

An equivalent ground thermal test method for single-phase fluid loop space radiator

Thermal vacuum test is widely used for the ground validation of spacecraft thermal control system. However, the conduction and convection can be simulated in normal ground pressure environment completely. By the employment of pumped fluid loops’ thermal control technology on spacecraft, conduction and convection become the main heat transfer behavior between radiator and inside cabin. As long as the heat transfer behavior between radiator and outer space can be equivalently simulated in normal pressure, the thermal vacuum test can be substituted by the normal ground pressure thermal test. In this paper, an equivalent normal pressure thermal test method for the spacecraft single-phase fluid loop radiator is proposed. The heat radiation between radiator and outer space has been equivalently simulated by combination of a group of refrigerators and thermal electrical cooler(TEC) array. By adjusting the heat rejection of each device, the relationship between heat flux and surface temperature of the radiator can be maintained. To verify this method,a validating system has been built up and the experiments have been carried out. The results indicate that the proposed equivalent ground thermal test method can simulate the heat rejection performance of radiator correctly and the temperature error between in-orbit theory value and experiment result of the radiator is less than 0.5 C, except for the equipment startup period. This provides a potential method for the thermal test of space systems especially for extra-large spacecraft which employs single-phase fluid loop radiator as thermal control approach.     

推力矢量飞机的起飞性能研究

简述推力矢量技术的作用,建立了带三轴推力矢量飞机的起飞滑跑段运动方程,通过数值仿真探讨了推力矢量的偏转大小对起飞性能的影响,对不同推力矢量偏转下飞机起飞性能的仿真计算结果进行了分析。仿真结果表明,采用直接力控制可以明显提高飞机的起飞性能。     

湍流转捩工程预报方法研究进展综述

湍流转捩现象对边界层流动的阻力和热交换特性具有严重影响。准确地预测转捩对工程设计意义重大。近年来发展迅速的转捩模型是一种非常适合工程计算的转捩预报方法。本文将转捩模型分成了4个类型,并对每种转捩模型的发展过程加以阐述。在分析和讨论的基础上,总结了目前转捩模型的发展水平,同时也指出尚存的不足之处,为将来构建新的转捩模型以及相关的转捩研究提供建议。     

大容量通信卫星热真空试验方法

文章结合大容量通信卫星的技术特点,系统总结了与之相适应的热真空试验方法改进措施,主要包括组件温度外扩过试验风险识别、红外灯阵加热器及转发器组合控温、星内真空度和污染监测、回温控制等,并对各项措施的实施效果进行了对比分析,以利进一步提高热真空试验水平。这些改进措施已成功应用于多颗大容量通信卫星热真空试验,对其他系列卫星热真空试验具有一定的借鉴意义。     

蒙特卡洛方法在降落伞-返回舱系统中的应用

文章简要介绍了蒙特卡洛方法的起源和基本思想，随机数和随机抽样的产生方法，同时，基于蒙特卡洛方法的基本思想提出了用数值方法计算飞船返回舱着陆姿态参数的初步设想。对于此问题的研究，将有助于节约试验经费，分析返回舱缓冲结构的设计合理性及可靠性。     

常推力作用下飞行器固定时间最优交会

研究了在常推力作用下,两个空间飞行器的固定时间最省燃料交会问题。通过对飞行器交会过程中最优推力弧段的研究,给出了关于飞行器的最优推力弧段的几个性质。这些结果为空间飞行器交会对接的工程设计提供了理论依据。