民用飞机综合模块化航电系统分区和资源分配的研究

对比航电传统系统架构,分析了综合模块化航电系统(Integrated Modular Avionics,简称IMA)架构的优点;针对IMA系统功能的高集成度带来的资源分配难度和安全性要求,提出了IMA系统分区和资源分配策略,并给出了具体方法,对民用飞机IMA系统设计具有一定的指导意义和实用价值。     

大尺寸复合材料RTM波纹梁设计优化

为了对使用Resin Transfer Molding(RTM)工艺制造的大尺寸复合材料波纹梁进行结构减重设计优化,运用CATIA软件复合材料设计模块对大尺寸波纹梁进行多厚度分区设计,并编制FORTRAN软件二次开发程序对波纹梁铺层角度和顺序进行优化,进行静强度计算,设计并进行波纹梁剪切试验,制造的波纹梁在某型飞机上成功应用并取得了明显的减重效果。     

Ⅲ—Ⅴ族四元固溶体中原子近邻及次近邻的键长表达方式

基于ＦＤＵＣ模型和Ⅲ－Ⅴ族元素共价半径不变的假设，本文出了Ⅲ－Ⅴ族固溶体中原子近邻和次近邻的键长表达式。这套键长表达式除依赖于四个Ⅲ－Ⅴ族元素的含量（ｘ，ｙ）外，只与四个纯化合物的晶胞参数或这四个Ⅲ－Ⅴ族元素的共价半径有关。而且也含盖了相应的伪二元固溶体的情况。本文还对其他的理论模型作了进一步的比较和讨论。     

螺旋弹簧应力松驰实验研究

对导弹弹体及发动机中常用的压缩螺旋弹簧进行应力松驰实验研究，得到了这种弹簧在常温下长期贮在职的应力松驰方程，为导弹武器系统的质量评判和延寿提供了可靠的实验依据。     

一种宽带阵列通道均衡器设计

从基本FIR均衡器的原理出发,讨论了校正源的设置方法和均衡器系数的计算方法.为了适应宽带阵列中高速信号处理的要求,探讨了一种经典的FIR均衡器时域高速实现方法.该时域实现虽然结构简单,但在滤波器阶数较高时需要大量的乘法资源.为了降低均衡器对乘法资源的需求,借鉴快速卷积的实现方法,提出了一种基于快速傅里叶变换的高速率均衡器实现方法.与时域方法相比,该方法在滤波器阶数大于32时能明显降低对乘法资源的损耗.对实测数据的分析,验证了该方法的正确性.     

复合材料缠绕气瓶可靠性验证技术

根据航天器用复合材料气瓶高可靠性特点,对复合材料气瓶的可靠性进行了分析,气瓶的失效模式主要为泄漏和爆破,影响因素分别为疲劳寿命和承压能力,其中疲劳寿命主要受内衬影响,而承压能力主要由复合层性能决定。最后对气瓶的可靠性试验进行了描述,举例说明了气瓶的可靠度试验验证方法。     

一种用于液晶曝光中的激光检测系统

介绍了一种非接触式激光检测系统，可用于检测液晶曝光中液晶模板与基板之间的间隙，给出了该种系统的测量原理、硬件系统、信号处理方法、测量结果、分辨力和误差分析，并指出了这种测量系统的应用。     

A nonlinear background removal method for seismo-ionospheric anomaly analysis under a complex solar activity scenario: A case study of the M9.0 Tohoku earthquake

A precise determination of ionospheric total electron content (TEC) anomaly variations that are likely associated with large earthquakes as observed by global positioning system (GPS) requires the elimination of the ionospheric effect from irregular solar electromagnetic radiation. In particular, revealing the seismo-ionospheric anomalies when earthquakes occurred during periods of high solar activity is of utmost importance. To overcome this constraint, a multiresolution time series processing technique based on wavelet transform applicable to global ionosphere map (GIM) TEC data was used to remove the nonlinear effect from solar radiation for the earthquake that struck Tohoku, Japan, on 11 March, 2011. As a result, it was found that the extracted TEC have a good correlation with the measured solar extreme ultraviolet flux in 26–34 nm (EUV_26–34) and the 10.7 cm solar radio flux (F_10.7). After removing the influence of solar radiation origin in GIM TEC, the analysis results show that the TEC around the forthcoming epicenter and its conjugate were significantly enhanced in the afternoon period of 8 March 2011, 3 days before the earthquake. The spatial distributions of the TEC anomalous and extreme enhancements indicate that the earthquake preparation process had brought with a TEC anomaly area of size approximately 1650 and 5700 km in the latitudinal and longitudinal directions, respectively.     

Stability analysis of an aeroelastic system with friction

In this paper, harmonic balance method, exact formulation and numerical simulation method are adopted to study the effects of different friction stiffness on the stability of 1.5 degrees of freedom aeroelastic system. On this basis, the expressions of input energy and dissipated energy are deduced, and the energy method is used to reveal the mechanisms of the stable boundary and unstable boundary existing in the system and the effects of different friction stiffness on the stability of the system. Studies have shown that the stability region and the critical aerodynamic damping ratio of the system rise with the increase of the friction stiffness, while the friction stiffness has little effect on the stability boundary. In the analysis of the stability of system, the results of harmonic balance method, exact formulation and Newmark of numerical simulation method are in good agreement. Compared with exact formulation and numerical simulation method, the concept and conclusion of harmonic balance method are simple in the system stability analysis.