Erosion of a Polyimide Material Exposed to Simulated Atomic Oxygen Environment

Oxygen plasma source generated by thermal cathode filament discharge has been used to study the erosion process of polyimide (PI) materials in atomic oxygen (AO) environment, and their mass loss, surface morphology and surface chemical compositions have been examined by scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS) after exposure to incremental AO flux. The data indicate that the physical adsorption of AO at the samples' surface results in the increase of oxygen concentration when polyimide is exposed to AO flux. Then selective chemical reactions of groups of polyimide materials with AO yield volatile organic compounds, sample mass loss is on linear increase and carpet-like surface morphology forms. In the initial exposure to AO, the reaction occurs mainly between AO and carbon in specific location of aromatic ring, then the reaction rate of C=O groups gradually increases. After AO exposure, the oxygen concentration increases while nitrogen and carbon concentration decreases. Reaction rate of groups containing nitrogen is slower compared with carbon and oxygen.     

Multi-frequency RCS Reduction Characteristics of Shape Stealth with MLFMA with Improved MMN

Three new control factors are presented for calculating the multipole mode number (MMN) efficiently and precisely. The effects of these control factors on the number of integral samples and the precision of multilevel fast multipole algorithm (MLFMA) are investigated. A new approach based on control factors which is proven to be able to improve the computational efficiency and reduce the needed memory significantly as well as ensuring the proper precision. For three aircraft models, the improved MLFMA is employed to analyze their multi-frequency scattering characteristics. It is found that aircraft shape can influence radar cross section (RCS) in different frequency zones. Both the multi-frequency RCS reduction characteristics of shape stealth aircraft and the conventional aircraft with stealth design taken into account are investigated, and the results show that shape stealth exhibits significant RCS reduction in the resonance and high-frequency zones, and with a weaker influence in the Rayleigh zone. Compared with radar absorbing material (RAM), shape stealth yields a wider multi-frequency RCS reduction. The above-mentioned results can be applied to stealth design for multiple frequencies or even for all frequencies.     

LXI仪器的LAN设置及控制

在介绍了LXI仪器类型、Non Auto-MDIX含义、Agilent33220A函数发生器性能和功能的基础上,以33220A函数/任意波形发生器的LAN接口设置为例,描述了其LAN接口DHCP,Auto IP,IP Address,SubnetMask,Default Gateway,Host Name,Domain Name,DNS Server,Password等参数的含义、设置方法,介绍了充分利用其提供的接口功能,达到远程控制其输出的方法。该方法达到了通过GPIB控制函数/任意波形发生器的同样效果,利用其LAN接口组建分布式测试系统,对程序设计者具有较高的参考借鉴价值。     

液压阻尼器对模型旋翼地面共振的影响

 分析了某采用定压阀和补油装置的液压阻尼器的非线性特性。对无铰式模型旋翼的地面共振稳定性进行了数值仿真研究,分析了两种不同的非线性液压阻尼器对地面共振稳定性的影响。结果表明：由于补油分配阀间隙的影响,阻尼器低速时的有效阻尼大大下降;在无阻尼器的模型旋翼稳定的转速区内,该阻尼器不能改善系统小扰动情况时的动稳定性;在无阻尼器的模型旋翼不稳定区内,系统将出现极限环,且极限环幅值随补油分配阀间隙的增大而增大。研究结果对液压阻尼器的设计具有参考价值。     

典型前缘结构抗鸟撞性能改进研究

 针对某典型前缘结构,研究了使用纤维金属层板(Fibre Metal Laminates,FMLs)蒙皮进行抗鸟撞设计的可行性。以显式动态冲击分析程序PAM-CRASH为平台,结合由鸟撞平板试验结果验证的鸟体本构模型参数,建立了鸟撞前缘结构数值模型。通过计算研究了使用不同蒙皮(铝合金、FMLs)的前缘结构在鸟撞作用下的变形破坏模式及吸能效果。结果表明：采用适当铺层的FMLs蒙皮可以有效地提高前缘结构的抗鸟撞性能。研究结论对飞机结构的抗鸟撞研究具有一定的参考价值。     

推力矢量飞机的起飞性能研究

简述推力矢量技术的作用,建立了带三轴推力矢量飞机的起飞滑跑段运动方程,通过数值仿真探讨了推力矢量的偏转大小对起飞性能的影响,对不同推力矢量偏转下飞机起飞性能的仿真计算结果进行了分析。仿真结果表明,采用直接力控制可以明显提高飞机的起飞性能。     

地面系留对直升机动力响应的影响

 建立了系留状态下直升机旋翼/机体耦合非线性动力学模型,无铰旋翼简化为当量铰刚性桨叶模型,假定机体是刚性体并受起落架和系留索的约束,系留索静态时松弛并只能承受拉力。采用数值仿真研究了系留对模型旋翼地面共振的影响,对初始扰动和旋翼转速对系统动力学行为的影响也进行了仿真研究。对于无系留的模型旋翼来说,在任何转速下没有出现不稳定现象;地面系留时系统会呈现稳定响应、极限环以及大幅值振荡等非线性动力学行为,大幅值振荡将使系留索、接头和支持结构承受破坏性动力载荷。     

D-最优试验设计在动力调谐陀螺测试中的应用

 为了提高动力调谐陀螺的静态漂移误差测试精度,针对简化静态漂移误差模型,并且考虑陀螺安装角误差的影响,依据D-最优试验设计理论以及正交设计的均匀分散性试验设计思路,设计了一种满足D-最优性质的正交八位置试验方案,并在整个正交空间内采用全局搜索的方法验证了其D-最优性。在相同试验环境下,采用力反馈位置试验法,以全正交空间预测误差平方和最小为评价准则,对该八位置试验方案和国军标GJB1183—91中的八位置试验方案进行比较与评价,试验结果表明该八位置试验方案优于国军标GJB1183—91中八位置试验方案。     

我国航空钛合金紧固件的发展

钛合金紧固件在现代飞机上应用广泛 ,本文简述了航空上使用的主要钛紧固件品种 ,总结了国内近年来钛紧固件的发展状况 ,提出了国内钛紧固件的发展设想。