Robust algorithm for combating look direction error problems

A simple and fast zero tracking algorithm for adaptive arrays with large look direction errors is presented and investigated. Basically, the algorithm is based on adjusting the complex zeroes of a power inversion array in a time-multiplexed manner to track all the sources in the environment. To preserve the desired signal which is supposed to be closest to the look direction of 0°, the algorithm removes the zero with the shortest distance to e^j0 so that the directional response consists of only nulls steered at the jammers. When compared with the least mean square (LMS) algorithm employing zeroth and first-order look direction constraints, the new algorithm has about the same implementation complexity, is considerably faster, and possesses a much better signal-to-noise ratio (SNR) performance when the look direction is erroneous     

Neural controllers for systems with unknown dynamics

This study presents a methodology for specifying a neural controller for a system about which no a priori model information is available. The neural design presumes that a finite duration input/output (I/O) histogram on the system is available. The design procedure extracts from the histogram sufficient information to specify the neural feedback controller. The resultant controller will drive the system along a general output reference profile (unknown during the design). The resultant controller also exhibits the capability of disturbance rejection and the capacity to stabilize unstable plants     

用FoxBase实现超文本多媒体技术飞机主客仓空调故障诊断系统

本文通过一个应用系统的编制过程，阐述了用数据库技术实现超文本多媒体技术的方法。     

基于模型的液体推进系统故障诊断算法

给出串联双涡轮结构以泵作为供应系统的液体火箭发动机系统故障仿真的准动态数学方法和基于灰色关联度分析的实时诊断算法。该算法对于调整计算确定的具体系统和预先设定的典型故障模式进行仿真计算、事先形成该发动机系统的故障模式样本集。试车时, 利用诊断算法对采集的发动机性能参数进行实时分析, 从而给出发动机所处的健康状况, 以便及时采取措施, 提高发动机的安全性和可靠性。      

液体火箭发动机充液导管流固耦合动力学特性

为了深入研究流固耦合（FSI）作用对液体火箭发动机充液导管频率特性的影响,采用传递矩阵法(TMM)建立了空间导管流固耦合动力学计算模型.针对真实发动机导管开展了传递矩阵模型与传统基于附加质量的有限元(FEM)（非耦合）模型仿真计算以及模态试验验证,比较了管径、壁厚等结构参数对导管流固耦合作用的影响.结果表明:在流固耦合作用下,导管各阶谐振频率减小、而对应的流体振荡与结构振动幅值增大.管径对导管低阶频率特性的影响较壁厚对其影响更大.对于该算例,当管径大于设计值30%后,耦合作用引起的1阶频率误差高于10%,此时流固耦合不能忽略;而壁厚对1阶谐振频率的影响则小于8%.      

基于准三维冰形算法的结冰预测技术及应用研究

机翼结冰是威胁民用飞机飞行安全的主要因素之一,准确预测机翼的结冰过程和特点,可为防除冰设计提供依据和支撑。提出了利用二维模拟三维的准三维冰形算法,该算法在保证结冰预测精度的同时,极大地降低了型号结冰计算成本;给出了顺气流和垂直于前缘两种典型民用飞机后掠翼机翼的二维剖面截取方法,并将采用该方法的计算结果与三维后掠机翼的结冰预测结果进行了对比分析。结果表明,相对于顺气流方式,垂直于前缘方式的准三维冰形算法与三维后掠机翼的结果更为接近。     

推力矢量飞机的起飞性能研究

简述推力矢量技术的作用,建立了带三轴推力矢量飞机的起飞滑跑段运动方程,通过数值仿真探讨了推力矢量的偏转大小对起飞性能的影响,对不同推力矢量偏转下飞机起飞性能的仿真计算结果进行了分析。仿真结果表明,采用直接力控制可以明显提高飞机的起飞性能。     

两种静弹修正方法的对比

本文针对工程应用的实际情况,采用线化理论和非线化理论对同一模型进行了静气动弹性计算,并对不同马赫数、不同高度的刚弹性计算结果进行了对比分析。结果表明,低速时可忽略弹性变形对气动力的影响,而高速时必须考虑弹性变形对气动力的影响,在工程应用初期,可用线化理论对非线性段气动力进行静弹修正,虽然精度有所降低,但效率却大大提高,在后期可用非线化理论进行校核计算。     

Erosion of a Polyimide Material Exposed to Simulated Atomic Oxygen Environment

Oxygen plasma source generated by thermal cathode filament discharge has been used to study the erosion process of polyimide (PI) materials in atomic oxygen (AO) environment, and their mass loss, surface morphology and surface chemical compositions have been examined by scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS) after exposure to incremental AO flux. The data indicate that the physical adsorption of AO at the samples' surface results in the increase of oxygen concentration when polyimide is exposed to AO flux. Then selective chemical reactions of groups of polyimide materials with AO yield volatile organic compounds, sample mass loss is on linear increase and carpet-like surface morphology forms. In the initial exposure to AO, the reaction occurs mainly between AO and carbon in specific location of aromatic ring, then the reaction rate of C=O groups gradually increases. After AO exposure, the oxygen concentration increases while nitrogen and carbon concentration decreases. Reaction rate of groups containing nitrogen is slower compared with carbon and oxygen.     

Multi-frequency RCS Reduction Characteristics of Shape Stealth with MLFMA with Improved MMN

Three new control factors are presented for calculating the multipole mode number (MMN) efficiently and precisely. The effects of these control factors on the number of integral samples and the precision of multilevel fast multipole algorithm (MLFMA) are investigated. A new approach based on control factors which is proven to be able to improve the computational efficiency and reduce the needed memory significantly as well as ensuring the proper precision. For three aircraft models, the improved MLFMA is employed to analyze their multi-frequency scattering characteristics. It is found that aircraft shape can influence radar cross section (RCS) in different frequency zones. Both the multi-frequency RCS reduction characteristics of shape stealth aircraft and the conventional aircraft with stealth design taken into account are investigated, and the results show that shape stealth exhibits significant RCS reduction in the resonance and high-frequency zones, and with a weaker influence in the Rayleigh zone. Compared with radar absorbing material (RAM), shape stealth yields a wider multi-frequency RCS reduction. The above-mentioned results can be applied to stealth design for multiple frequencies or even for all frequencies.