负压式平板型环路热管试验

为解决高热流密度电子器件的散热问题,设计了一套负压式铜 甲醇环路热管,其蒸发器设计成平板型。研究表明,该平板型环路热管具有较高的散热能力,能够在无重力姿态和重力姿态下顺利启动。当重力倾角分别为0°、18°和30°,热负荷为160W时,蒸发器壁面温度分别达到85.8℃、66.3℃和64.6℃。按照环路热管启动状态,其启动过程可分为3个阶段：加热阶段、预启动阶段和后启动阶段。在低热负荷区域,环路热管会出现温度波动现象。增大重力倾角,有利于降低蒸发器壁面温度和热阻。当重力倾角为30°,热负荷从10W递增到160W时,环路热管的热阻从4.97℃/W降低到0.39℃/W。     

基于超声波的移动机器人多目标探测定位方法

为了使移动机器人能够对离散的多个目标进行准确的探测定位,提出了一种新的超声波智能探测方法.采用3个收发一体的超声换能器阵列发送近似的平面声波波束,并建立空间坐标系.3个探头定时发送超声波脉冲,同时数字信号处理器采集并分析接收到的回波信号,在给定的算法下滤除杂波、识别提取回波首波、二次回波和三次回波等特征信号数据,在正确检测出各路波束的回波时间后,通过计算给出多个被测物体的准确定位.实验采用了杆件物体作为被测对象,对回波信号进行高速数据采集处理后计算出被测目标的坐标值,比较了计算物位与实测物位数据,结果验证了该方法的可行性与正确性.      

Low-dose carbon ion irradiation effects on DNA damage and oxidative stress in the mouse testis

To investigate the effects of low-dose carbon ion irradiation on reproductive system of mice, the testes of outbred Kunming strain mice were whole-body irradiated with 0, 0.05, 0.1, 0.5 and 1 Gy, respectively. We measured DNA double-strand breaks (DNA DSBs) and oxidative stress parameters including malondialdehyde (MDA) content, superoxide dismutase (SOD) activity, and testis weight and sperm count at 12 h, 21 d and 35 d after irradiation in mouse testis. At 12 h postirradiation, a significant increase in DNA DSB level but no pronounced alterations in MDA content or SOD activity were observed in 0.5 and 1 Gy groups compared with the control group. At 21 d postirradiation, there was a significant reduction in sperm count and distinct enhancements of DSB level and MDA content in 0.5 and 1 Gy groups in comparison with control. At 35 d postirradiation, the levels of DNA DSBs and MDA, and SOD activity returned to the baseline except for the MDA content in 1 Gy (P < 0.05), while extreme falls of sperm count were still observed in 0.5 (P < 0.01) and 1 Gy (P < 0.01) groups. For the 0.05 or 0.1 Gy group, no differences were found in DNA DSB level and MDA content between control and at 12 h, 21 d and 35 d after irradiation, indicating that lower doses of carbon ion irradiation have no significant influence on spermatogenesis processes. In this study, male germ cells irradiated with over 0.5 Gy of carbon ions are difficult to repair completely marked by the sperm count. Furthermore, these data suggest that the deleterious effects may be chronic or delayed in reproductive system after whole-body exposure to acute high-dose carbon ions.     

Geostationary orbit determination using SATRE

A new strategy of precise orbit determination (POD) for GEO (Geostationary Earth Orbit) satellite using SATRE (SAtellite Time and Ranging Equipment) is presented. Two observation modes are proposed and different channels of the same instruments are used to construct different observation modes, one mode receiving time signals from their own station and the other mode receiving time signals from each other for two stations called pairs of combined observations. Using data from such a tracking network in China, the results for both modes are compared. The precise orbit determination for the Sino-1 satellite using the data from 6 June 2005 to 13 June 2005 has been carried out in this work. The RMS (Root-Mean-Square) of observing residuals for 3-day solutions with the former mode is better than 9.1 cm. The RMS of observing residuals for 3-day solutions with the latter mode is better than 4.8 cm, much better than the former mode. Orbital overlapping (3-day orbit solution with 1-day orbit overlap) tests show that the RMS of the orbit difference for the former mode is 0.16 m in the radial direction, 0.53 m in the along-track direction, 0.97 m in the cross-track direction and 1.12 m in the 3-dimension position and the RMS of the orbit difference for the latter mode is 0.36 m in the radial direction, 0.89 m in the along-track direction, 1.18 m in the cross-track direction and 1.52 m in the 3-dimension position, almost the same as the former mode. All the experiments indicate that a meter-level accuracy of orbit determination for geostationary satellite is achievable.     

航空航天仿真试验假人研制

介绍了国内航空仿真试验假人的功能要求和研制状况,将研制工作分为人体参数测量、机械结构、信号采集与处理和可靠性验证4个部分进行.重点阐述了仿真试验假人的骨架、关节和皮肤肌肉的材料选择及结构设计特点.传感测试能力可输出记录64路生理信号,整体性能接近美国军用假人ADAM的水平,为高危的载人航空航天装备动态性能试验测试提供了有效工具.     

民用飞机驾驶舱构型快速设计方法

为在方案设计阶段提高民用飞机总体方案的设计质量和形成效率,研究了民用飞机驾驶舱构型的设计措施,并在一个开放式的飞机总体设计环境中实现了这一功能.定义了飞机机身坐标系,研究了确定驾驶员设计眼位、驾驶舱布置和风挡参数化设计与模型构建的方法.建立了交互式民机驾驶舱构型二、三维快速设计环境.在此基础上,实现了驾驶舱模型的自动化调整,为总体设计阶段进行多学科设计优化奠定了基础.通过设计实例证明了该方法的有效性.     

新型电子束焊机阴极加热电源自动调节系统

开发了一种新型电子束焊机阴极加热电源自动调节系统,包括新型主电路拓扑和对应控制策略,该系统能够使阴极处在最佳加热电流状态,从而提高电子束流稳定性.并且在检测到电子枪未加高压时,阴极加热电流自动关闭,在加有高压但束流给定为零时,阴极加热电流自动减少,能大幅增加阴极的使用寿命.经试验证明该系统相比传统阴极加热电源操作简洁、快速和准确,对焊缝成形质量好.     

新型二维推力矢量喷管数值模拟

针对现有流体推力矢量控制方案的不足,提出利用喷流附壁效应的新型矢量喷管,借助于尾喷管射流对固壁延伸面的跟随作用控制尾喷流方向,实现推力转向.在此基础上采用限制流量的方法调节喷流的抽吸程度,产生不同的横向压力梯度,达到了矢量化控制推力转向的目的.运用这一概念设计了二维矢量喷管,用数值实验方式验证了喷管的推力转向效果,采用限制流量方法得到的最大矢量角度约13.3°,进一步结合射流控制可以使矢量偏角达到20°以上.通过对该喷管流场的数值计算研究,探讨了该矢量喷管内喷流转向形成的流动机理,从推力损失、转向效率上对喷管的性能特点进行了分析,为下一步开展实验研究奠定了基础.     

液力自动变速器传动系统建模与换挡特性仿真

根据液力自动变速器换挡过程中操纵件的动态特性,建立换挡过程的动力学模型.建立以转速、节气门开度和驱动模式为参数的发动机模型.依据整车参数,设计换挡规律,提出换挡过程中操纵件的油压控制方法.基于MathCAD数学软件,建立包含驾驶员、机械系统和控制系统等完整的动力传动系统虚拟样机.仿真结果表明,建立的仿真原型与平台可预测传动系统在多种工况下相应动态特性,为换挡规律与换挡品质的仿真提供一个合理的解决方案.     

捻度对缝合线浸润特性的影响

研究不同捻度缝合线的浸润效果,通过SEM(扫描电子显微镜)观察不同捻度缝合线浸润树脂后的尺寸及其与树脂界面结合情况.研究结果表明:随着缝合线捻度的增加,树脂浸润缝合线的效果变差,缝合线纤维束及单丝与树脂结合情况变差;浸润树脂后的缝合线纤维束尺寸相对浸润之前提高,但随着捻度的增加,浸润树脂后的缝合线纤维束尺寸降低.