High speed driving of a gain-switched laser diode with anexponential transmission line

With the increase of information capacity of an airborne system, high speed driving of laser diodes have been of interest. In order to match the low resistive LD, proposed in this paper is an exponential transmission line, which is used as preshaping to compensate the pattern effect in gain switching of laser diodes. It also will be used to overcome the effect of parasitic elements in high speed driving to improve the rise and trail edges of the output waveform. An accurate circuit model of the exponential line for the PSPICE program has been developed and simulations are conveniently carried out by employing PSPICE     

侧链含硝基氮杂基团的聚醚粘合剂的性能及应用──新型硝基粘合剂研究Ⅲ

对新型的侧链含硝基氨杂基因的富能聚醚粘合剂──端羟基２─甲硝胺基乙基缩水甘油醚均聚醚（ＮＰＥ—Ａ）和端羟基共聚醚（ＮＰＥ—Ｂ）的性能进行了研究。结果表明，ＮＰＥ的热稳定性和化学稳定性良好，优于普通碳氢聚醚粘合剂（ＨＣＰＥ）和新型氟碳聚醚粘合剂（ＦＣＰＥ）；其固化后的力学性能良好。简要地叙述了以ＮＰＥ—Ｂ为粘合剂的固体火箭推进剂的配方和性能。     

纯辐射换热航天器系统比缩热负载试验方法

首先讨论了纯辐射换热的航天器系统温度场在恒定热源情况下具有渐近稳定特性，然后据此提出了对该系统可采用比缩热负载进行热模拟试验的方法。     

基于图像识别的发动机内窥智能检测系统研究

介绍了一种基于图像识别技术的航空发动机内窥检测的新方法，采用最大类间方差法计算二值化分割的最佳阈值，并将提取的图像特征输入神经网络进行分层识别，最后由专家系统对损伤程度进行了诊断。通过现场测试，证明了该方法的有效性和实用性．     

Investigation of corona initiation voltage at reduced pressures

The results of an experimental study of the 60 Hz ac corona inception voltage at reduced pressures for a cylindrical conductor and a parallel ground plane are presented. Several spacings and bare and insulated conductors of several diameters are considered. Empirical expressions from which a reasonably accurate prediction of the corona inception voltage (CIV) may be made have been inferred from experimental data     

铝合金薄板焊接热裂敏感性探索

探讨了用钨极氩弧焊焊接铝合金ＬＹ１２ＣＺ及ＬＹ１２Ｍ薄板时其热裂纹的变化规律，并分析了焊接工艺参数及填充材料对热裂纹的影响。试验结果表明，选择合适的工艺参数和填充材料可以明显提高该类合金的抗裂性能。     

新时期高职退伍复学学生思政教育问题与对策研究

做好新时期高职退伍复学学生思政教育工作有利于促进大学生从军报国,有利于助推退伍生成长成才,有利于强化高职院校学生教育管理.退伍生思政教育面临诸如"边缘化"、缺乏针对性、缺乏联动性等困境,通过发挥社会主义核心价值观的引领作用、发挥学工人员的主导作用、发挥思政课的主渠道作用、发挥课程思政的辅助作用、发挥文化育人的隐性作用,...     

Estimation of ground range on the sweep frequency backscatter leading edge

The high frequency management system with backscatter radar supplies the real time ionosphere channel conditions to high frequency users, which leads to the demand for the ground range between the radar location and the scatters on the distant ground. The ionosphere electron density profile is usually inversed to obtain the ground range. An inversion algorithm, with which the ground range on the leading edge of the backscatter ionograms can be obtained without electron density, is presented in this paper. The ray path geometry of the backscatter sounding and the change in the group path on the leading edge with operating frequency are used to derive the ground range. Synthesized backscatter ionogram and experimental backscatter ionograms are processed to validate the algorithm. The results indicate that the algorithm is usable for high frequency management system.     

定常对称背涡流态下细长体绕流结构的演变

应用数值计算的方法模拟了细长体截面绕流结构的演变过程.指出随着细长体背涡的发展,导致截面流场的拓扑结构发生变化,会出现一种临界流动状态.并用微分方程的定性理论分析了此时流场中出现的一种高阶奇点.这种高阶奇点的指数为-3/2,它是结构不稳定的,稍有扰动就会产生分叉,使流场的拓扑结构发生变化.得出了定常对称背涡流态下细长体的空间绕流结构图.     

循环热处理工艺对熔模精铸钛铝基合金组织与性能的影响

循环热处理工艺主要是通过在回火过程中的不连续粗化反应细化合金的组织,循环次数和保温时间对循环热处理的效果有明显的影响。循环热处理工艺通过细化熔模精铸Ti-48Al-2Cr-2Nb合金的组织改善了其力学性能,经过循环热处理后合金的室温最大拉应变也达到了0.68%。对合金的室温拉伸断口分析可知,热处理后合金的室温拉伸断裂方式仍以穿层片断裂为主,没有出现明显的屈服。