固有模态函数(IMF)积检测器——以低信噪比情况下超宽带雷达信号检测为例

首次提出了一种固有模态函数积检测器.首先通过经验模式分解(EMD)把带噪信号分解成有限个固有模态函数(IMF).检测的基本思路是,对各个IMF分量的绝对值作逐点乘积,用于抑制噪声并凸现信号,最后进行滤波和判决.本文以UWB信号为例,数据源于UWB雷达实验系统.在低信噪比(SNR),UWB脉冲与噪声波形相似,且噪声概率密度函数(PDF)未知情况下,进行实验.结果表明,当峰峰信噪比低于5 dB时,该检测器性能优于Teager能量算子(TEO).     

脉冲等离子体推力器羽流预测计算研究

为了能够将脉冲等离子体推力器成功地运用于空间,需对其羽流进行研究。将一维 MHD双温放电模型的计算结果作为入口条件,运用DSMC（Direct Simulation Monte\|Carlo ）／PIC（Particle in Cell）流体混合算法一体化模拟实验室PPT羽流。验证计算显示该模 型具有一体化模拟脉冲等离子体推力器羽流的能力。对不同初始放电能量下的羽流场进行模 拟,给出了离子、中性粒子、电子温度、轴线上质量流率和出口平面返流质量流率的变化情 况。计算结果显示高放电能量下返流量更大,同时中性粒子在返流中所占比例也越大。
     

固有模态函数（IMF）积检测器——以低信噪比情况下超宽带雷达信号检测为例

首次提出了一种固有模态函数积检测器。首先通过经验模式分解（EMD）把带噪信号分解成有限个固有模态函数（IMF）。检测的基本思路是，对各个IMF分量的绝对值作逐点乘积，用于抑制噪声并凸现信号，最后进行滤波和判决。本文以UWB信号为例，数据源于UWB雷达实验系统。在低信噪比（SNR），UWB脉冲与噪声波形相似，且噪声概率密度函数（PDF）未知情况下，进行实验。结果表明，当峰峰信噪比低于5dB时，该检测器性能优于Teager能量算子（TEO）。     

基于产业思维的航天发射服务研究

首先从核心驱动出发提出航天发展三阶段第一推动力,从产业要素出发分析航天产业进阶的市场、技术和产业政策三要素。而后从价值链出发研究航天产业产值分布和产业整合策略。最后分析了新兴航天发射服务公司的模式、产品和技术,为我国航天发射服务提供参考。     

仿生四足六旋翼无人机自适应着陆性能分析

旋翼无人机在民用和军用领域被广泛应用,但传统撬式起落架在复杂地形下难以起降,为了扩大旋翼无人机的降落面积和应用范围,设计一种仿人腿式两级缓冲自适应起落架。通过对仿生腿的正逆运动学分析,提出一种自适应起落架姿态调整策略;建立仿生四足六旋翼无人机着陆动力学模型,基于多体动力学软件sim?center 3D 开展了着陆动力学仿真,并与传统撬式起落架进行着陆性能对比研究。结果表明：着陆腿式的两级缓冲自适应起落架及其姿态调整策略,能够使滚转角减小95.69%,过载系数降低34.06%,两级缓冲自适应起落架在面对复杂地形时具备主动调节姿态安全着陆的地形适应能力和极好的减震缓冲能力。     

On the convergence of iterative methods for bearings-only tracking

This paper deals with the analysis of the convergence of iterative methods for bearings only tracking (BOT). A geometric and unified framework is developed. Explicit sufficient conditions ensuring convergence of iterative methods for maximization of the likelihood functional are then derived     

Bearings-only tracking for maneuvering sources

Classical bearings-only target-motion analysis (TMA) is restricted to sources with constant motion parameters (usually position and velocity). However, most interesting sources have maneuvering abilities, thus degrading the performance of classical TMA. In the passive sonar context a long-time source-observer encounter is realistic, so the source maneuver possibilities may be important in regard to the source and array baseline. This advocates for the consideration and modeling of the whole source trajectory including source maneuver uncertainty. With that aim, a convenient framework is the hidden Markov model (HMM). A basic idea consists of a two-levels discretization of the state-space. The probabilities of position transition are deduced from the probabilities of velocity transitions which, themselves, are directly related to the source maneuvering capability. The source state sequence estimation is achieved by means of classical dynamic programming (DP). This approach does not require any prior information relative to the source maneuvers. However, the probabilistic nature of the source trajectory confers a major role to the optimization of the observer maneuvers. This problem is then solved by using the general framework of the Markov decision process (MDP)     

The Solar Sail Materials (SSM) project – Status of activities

SSM (Solar Sail Materials) is an on-going project for the European Space Agency (ESA) relying on past and recent European solar sail design projects. It aims at developing and testing future technologies suitable for large, operational solar sailcrafts.     

Target motion analysis with multiple arrays: performance analysis

The performance analysis of source trajectory estimation using measurements provided by multiple platforms (or arrays) is studied. In numerous practical situations, the maneuvering ability of the receiver (e.g., a ship towing linear arrays) is limited, leading to the assumption that the observer motion is rectilinear and uniform. Even if this hypothesis appears quite restrictive, practical and tactical considerations fully justify its interest. This leads to consider multiple (platform) target motion analysis (denoted MTMA) and to analyze the performance of such trajectory estimation methods     

PR状态方程在超临界喷射模型中的应用

针对超临界流体物性的特殊性,对超临界喷射数值模拟方法进行研究。基于PR状态方程建立了考虑超临界流体特点的超临界喷射数值模型,并采用该模型对超临界C10H22喷射到超临界N2环境中的喷射进行了数值模拟。对比研究了采用PR状态方程的真实气体模型和理想气体模型得出的密度、温度、质量分数分布以及超临界喷射长度和喷射扩张角的变化规律和差异性,并与试验数据进行了对比。结果表明:2种模型在物性预测上的差异会造成以上喷射特性模拟结果的巨大差异,理想气体模型模拟结果与试验数据误差很大,利用真实气体模型能够得到与试验数据较为吻合的结果。基于PR状态方程的超临界喷射数值模型准确可靠,可为碳氢燃料的超临界喷射现象提供参考。