超声速预混气的热射流起爆过程数值模拟

采用带有化学反应的Euler方程,对超声速预混气的热射流起爆过程进行了研究。在来流速度大于CJ(Chapman-Jouguet)爆震速度的情况下,射流所导致的弓形激波在爆震波起爆过程中起到了重要作用,而爆震波不稳定性导致横波的产生是决定能否完全起爆的关键因素。射流角度的改变能够影响到起爆的过程与驻定性质。随着射流角度的逐渐减小,会出现起爆后驻定、起爆后不能驻定以及起爆失败三种结果。     

基于BL碰撞算法求解排样过程中干涉的问题

在自动排料过程中,采用BL排放策略的移动碰撞算法时,需要反复地更新待排板料中多边形的边界,在某次更新边界的规则不合理时,排放下一块料极易出现图形干涉的现象。针对这个问题,本文采用计算机图形学和计算几何方面的知识,提出一种解决合成多边形时出现干涉问题的方法。     

Control-oriented Modeling for Air-breathing Hypersonic Vehicle Using Parameterized Configuration Approach

This article presents a parameterized configuration modeling approach to develop a 6 degrees of freedom (DOF) rigid-body model for air-breathing hypersonic vehicle (AHV). The modeling process involves the parameterized configuration design, inviscous hypersonic aerodynamic force calculation and scramjet engine modeling. The parameters are designed for airframe-propulsion integration configuration, the aerodynamic force calculation is based on engineering experimental methods, and the engine model is acquired from gas dynamics and quasi-one dimensional combustor calculations. Multivariate fitting is used to obtain analytical equations for aerodynamic force and thrust. Furthermore, the fitting accuracy is evaluated by relative error (RE). Trim results show that the model can be applied to the investigation of control method for AHV during the cruise phase. The modeling process integrates several disciplines such as configuration design, aerodynamic calculation, scramjet modeling and control method. Therefore the modeling method makes it possible to conduct AHV aerodynamics/propulsion/control integration design.     

Admission Control of VL in AFDX Under HRT Constraints

Avionics full duplex switched ethernet(AFDX) is a switched interconnection technology developed to provide reliable data exchange with strong data transmission time guarantees in internal communication of the spacecraft or aircraft.Virtual link(VL) is an important concept of AFDX to meet quality of service(QoS) requirements in terms of end-to-end message deadlines.A VL admission control algorithm in AFDX network under hard real-time(HRT) constraints is studied.Based on the scheduling prin-ciple of AFDX prot...     

电脉冲除冰(EIDI)技术研究

将电脉冲除冰(EIDI)系统的一个工作周期分解为四个过程,进而分析其工作原理.以冲击摆锤试验和Bernhart-Schrag模型为例,介绍了电动力学方面的研究方法和研究成果.通过蒙皮表面加速度、应变、振动位移等参数,分析了由脉冲力所产生的结构动力学特性.利用蒙皮表面的应变程度,给出了一种除冰预测准则.总结了包括飞行试验、疲劳试验以及电磁干扰试验在内的工程应用试验研究结果.在此基础上,对EIDI技术的发展方向进行了展望.      

STOCHASTIC BOUNDARY ELEMENT METHODS FOR 3－D PROBLEMS WITH CENTRIFUGAL FORCES AND RELIABILITY ANALYSIS

ＳＴＯＣＨＡＳＴＩＣＢＯＵＮＤＡＲＹＥＬＥＭＥＮＴＭＥＴＨＯＤＳＦＯＲ３－ＤＰＲＯＢＬＥＭＳＷＩＴＨＣＥＮＴＲＩＦＵＧＡＬＦＯＲＣＥＳＡＮＤＲＥＬＩＡＢＩＬＩＴＹＡＮＡＬＹＳＩＳ￥ＷｅｎＷｅｉｄｏｎｇ；ＳｕｎＸｉａｏｌｉｎｇ（ＮａｎｊｉｎｇＵｎｉｖｅ...     

接触问题形状优化的边界元法及其工程应用

提出一种用边界元法对平面弹性接触问题进行形状优化的设计分析方法。讨论了平面接触问题形状优化中设计变量的选取、形状描述的方法以及目标函数和约束条件的确定,进行了灵敏度和形状优化的算例考核,并对航空发动机枞树形榫头／榫槽进行了形状优化设计的应用分析。     

数控系统传感器故障检测隔离及适应技术

介绍一种发动机传感器故障的检测、隔离及适应方法,并给出某型涡轴发动机的数字仿真实例,说明该方法的有效性和实用性。     

数据采集系统动态准确度的一种评价方法

介绍了一种用于评价数据采集系统动态准确度的定义及测试方法，同时评价了其动态条件下的偏置误差、增益误差及模数转换有效位数，最终给出了一种数据采集系统的实际测试评价结果。     

榫头/榫槽接触问题边界元分析

本文用增量理论建立了二维弹性接触问题的边界元法方程,讨论了求解接触问题过程中的一些具体做法。文中分别对盘/片组件的燕尾型与枞树型榫头与榫槽的接触应力作了数值分析。与有限元及光弹试验结果对比表明,边界元法的结果是令人满意的。