Radar Identification of Naval Vessels

A scheme is presented for the identification of naval vessels via active multiple-frequency radar interrogation. A major virtue of the described method is the use of a response waveform synthesized using amplitude data only. A prediction correlation using natural resonances associated with substructures on the vessels is applied to synthetically generated matched-filter response waveforms. The identification scheme is tested using measured model data for 8 vessels on a simulated sea surface. A correct identification probability of roughly 77 percent is obtained.     

The relevant atomic data

The current status of the theoretical methods for producing the relevant atomic data is surveyed.Proceedings of the Conference Solar Physics from Space, held at at the Swiss Federal Institute of Technology Zurich (ETHZ), 11–14 November 1980.     

捷联式天线稳定平台动力学建模与仿真分析

对于体积有限制的战术导弹应用,导引头天线伺服系统的体积受到严格限制,传统的速率陀螺稳定平台的应用受到挑战,为此提出采用捷联稳定方式来解决视线稳定问题.根据弹载捷联式天线平台的结构特点及稳定原理,应用坐标变换方法,完整地建立了两自由度捷联式天线平台的运动学与动力学模型.通过分析平台框架运动学耦合关系,表明捷联稳定方式与速率陀螺稳定方式的基本区别在于信息的获取和控制方式上,速率陀螺稳定方式是一种直接硬件稳定方法,而捷联稳定方式是一种软件补偿方法.在此基础上,对框架动力学耦合特性进行了数值仿真,结果表明:弹体对框架的耦合较强,需要进行弹体解耦,而框架之间的交叉耦合相对较弱,实际设计时可以忽略.所得结果为进一步研究捷联式天线稳定平台提供了理论基础,也为小型化导引头视线稳定平台系统的工程设计提供了一种解决方案.     

RCS分析中多次反射的计算及程序实现技术

介绍目标RCS分析计算中多次散射的计算方法,计算多次散射时主要考虑面元-面元之间的相互作用,计算过程采用几何光学法(GO)、物理光学法(PO),在总后向RCS计算中还运用了等效电磁流法.同时,文中讨论计算多次散射的程序实现技术.最后,给出计算例子,考虑多次散射时总的后向RCS计算结果与前人发表的实验结果相吻合.      

保证试验对陶瓷试件疲劳强度的影响

 应用断裂力学理论分析了保证试验对陶瓷试件造成的损伤及其对疲劳强度的影响。保证试验后试件的最低强度可根据材料的亚临界裂纹扩展参量、保证应力和保证试验的卸载速率估算。采用惰性试验环境和高的卸载速率可获得较高的试件最低剩余强度值。     

偏置动量系统中的挠性天线指向控制研究

从工程实践角度,探讨了在目前广泛采用的偏置动量轮三轴姿态稳定卫星上,进行大尺寸（３～５ｍ）和高指向精度（０．０５°）的挠性天性指向控制问题。在建立具有挠性天线的星体动力学模型,以及在借鉴和改进有关抑制挠性天线振动研究的基础上,设计了三轴稳定卫星平台上的挠性天线指向控制系统的方案。最后,根据数值仿真结果,给出了影响挠性天线指向精度的主要因素。     

The Genesis Solar-Wind Collector Materials

Genesis (NASA Discovery Mission #5) is a sample return mission. Collectors comprised of ultra-high purity materials will be exposed to the solar wind and then returned to Earth for laboratory analysis. There is a suite of fifteen types of ultra-pure materials distributed among several locations. Most of the materials are mounted on deployable panels (‘collector arrays’), with some as targets in the focal spot of an electrostatic mirror (the ‘concentrator’). Other materials are strategically placed on the spacecraft as additional targets of opportunity to maximize the area for solar-wind collection. Most of the collection area consists of hexagonal collectors in the arrays; approximately half are silicon, the rest are for solar-wind components not retained and/or not easily measured in silicon. There are a variety of materials both in collector arrays and elsewhere targeted for the analyses of specific solar-wind components. Engineering and science factors drove the selection process. Engineering required testing of physical properties such as the ability to withstand shaking on launch and thermal cycling during deployment. Science constraints included bulk purity, surface and interface cleanliness, retentiveness with respect to individual solar-wind components, and availability. A detailed report of material parameters planned as a resource for choosing materials for study will be published on a Genesis website, and will be updated as additional information is obtained. Some material is already linked to the Genesis plasma data website (genesis.lanl.gov). Genesis should provide a reservoir of materials for allocation to the scientific community throughout the 21st Century. This revised version was published online in August 2006 with corrections to the Cover Date.     

高深径比TC4钛合金筒形件普旋成型有限元数值模拟

采用有限元法对特定高深径比TC4钛合金筒形件普旋成型进行了数值模拟,分析了运动轨迹、旋压道次间距和间隙对成型的影响.结果表明普旋时坯料不同部位的应力应变状态不同,采用凹曲线轨迹,间隙为3.5 mm,首道次间距为9 mm,分6道次旋压成型效果好.同时在有限元数值模拟基础上,成功旋制了高精度试验件,说明有限元模拟对旋压具有很好指导意义.     

Near Infrared Spectrometer for the Near Earth Asteroid Rendezvous Mission

The Near-Infrared Spectrometer (NIS) instrument on the Near-Earth Asteroid Rendezvous (NEAR) spacecraft is designed to map spectral properties of the mission target, the S-type asteroid 433 Eros, at near-infrared wavelengths diagnostic of the composition of minerals forming S asteroids. NIS is a grating spectrometer, in which light is directed by a dichroic beam-splitter onto a 32-element Ge detector (center wavelengths, 816–1486 nm) and a 32-element InGaAs detector (center wavelengths, 1371–2708 nm). Each detector reports a 32-channel spectrum at 12-bit quantization. The field-of-view is selectable using slits with dimensions calibrated at 0.37° × 0.76° (narrow slit) and 0.74° × 0.76° (wide slit). A shutter can be closed for dark current measurements. For the Ge detector, there is an option to command a 10x boost in gain. A scan mirror rotates the field-of-view over a 140° range, and a diffuse gold radiance calibration target is viewable at the sunward edge of the field of regard. Spectra are measured once per second, and up to 16 can be summed onboard. Hyperspectral image cubes are built up by a combination of down-track spacecraft motion and cross-track scanning of the mirror. Instrument software allows execution of data acquisition macros, which include selection of the slit width, number of spectra to sum, gain, mirror scanning, and an option to interleave dark spectra with the shutter closed among asteroid observations. The instrument was extensively characterized by on-ground calibration, and a comprehensive program of in-flight calibration was begun shortly after launch. NIS observations of Eros will largely be coordinated with multicolor imaging from the Multispectral Imager (MSI). NIS will begin observing Eros during approach to the asteroid, and the instrument will map Eros at successively higher spatial resolutions as NEAR's orbit around Eros is lowered incrementally to 25 km altitude. Ultimate products of the investigation will include composition maps of the entire illuminated surface of Eros at spatial resolutions as high as 300 m.