Stewart平台动力学建模及鲁棒主动隔振控制

未来复杂航天器低频模态密集,其敏感载荷要求很高的指向精度和稳定度,只对航天器本体姿态控制很难满足要求.本文采用Stewart超静平台对敏感载荷进行6自由度主动隔振,建立了非线性动力学模型,并根据线性模型设计了多变量鲁棒控制器,采用DK迭代算法求解.频域分析可得Stewart平台对3～800Hz的扰动主动隔振大于25dB,仿真证明Stewart平台对10Hz谐波扰动隔振性能优于40dB,对白噪声随机扰动隔振性能优于30dB,有效抑制了微小扰动,起到了6自由度超静隔振平台作用.     

一种弹载超宽带共形天线

介绍了一种可以用于弹载被动制导系统的、可以减小空间占用面积的超宽带共形对数周期折合槽天线。给出了单个天线的仿真和实测结果,以及这种天线安装于共形平台上的测试结果。该型天线采用了共面波导馈电方法,具有抗振动、抗冲击、短时耐高温等特性。此外该型天线还具有低剖面、易于安装于大型金属表面等特点。     

利用航天器分舱段振动试验数据获取整器响应的方法

未来大型组合体航天器振动试验可能难以在现有设备上进行,需要进行分舱考核。文章针对此问题开展了利用分舱段振动试验获取整器响应的方法研究。提出的方法为:根据不同界面下模态的映射关系,利用单舱段的振动试验数据辨识出舱段的两端固支模态;采用模态综合技术计算出整器组合体模态参数,拟合出结构的加速度响应传递函数;结合整器的加速度试验条件可以给出整器的试验响应曲线。仿真验证结果表明该方法合理可行,具有工程应用价值。     

Ka波段机载双模式干涉SAR系统设计及测量精度分析

为解决传统干涉合成孔径雷达(SAR)系统只能顺轨干涉或交轨干涉,无法兼顾高精度高程测量和速度测量的问题,开展了Ka波段机载双模式干涉SAR系统设计与干涉测量精度分析。基于Ka波段电磁波波长短、干涉相位敏感度好的特点,利用较短的干涉基线在同一干涉SAR系统中实现高精度干涉测高与测速,并介绍了所设计的Ka波段机载双模式干涉SAR验证系统。仿真结果表明:该系统具备高效率、高精度干涉测量能力,可获得亚米级的绝对测高精度和0.1 m/s的测速精度。     

W波段FMCW体制ISAR系统成像及试验验证

毫米波雷达具有高分辨率、小型化、轻型化等特点,是现代雷达应用的一个重要发展方向。随着W波段元器件的突破,W波段逆合成孔径雷达(ISAR)系统的研究引起了世界发达国家的重视。W波段ISAR图像分辨率高,目标散射细节更丰富,可提高目标分类、识别精度,在军民领域均有很大的应用价值。介绍了一种W波段调频连续波(FMCW)体制ISAR系统,探讨了该体制ISAR系统性能并介绍了W波段FMCW ISAR成像处理算法。该系统发射信号中心频率为94 GHz,带宽为5 GHz。利用该系统开展了ISAR转台试验,并利用RD算法得到了ISAR系统初步成像结果。     

Drag derived altitude aided navigation method

The navigation problem of the lifting reentry vehicles has attracted much research interest in the past decade.This paper researches the navigation in the blackout zone during the reentry phase of the aircraft,when the communication signals are attenuated and even interrupted by the blackout zone.However,when calculating altitude,a pure classic inertial navigation algorithm appears imprecise and divergent.In order to obtain a more precise aircraft altitude,this paper applies an integrated navigation method based on inertial navigation algorithms,which uses drag derived altitude to aid the inertial navigation during the blackout zone.This method can overcome the shortcomings of the inertial navigation system and improve the navigation accuracy.To further improve the navigation accuracy,the applicable condition and the main error factors,such as the atmospheric coefficient error and drag coefficient error are analyzed in detail.Then the damping circuit design of the navigation control system and the damping coefficients determination is introduced.The feasibility of the method is verified by the typical reentry trajectory simulation,and the influence of the iterative times on the accuracy is analyzed.Simulation results show that iterative three times achieves the best effect.     

可折叠铍青铜弹性豆荚杆焊接成型工艺

可折叠铍青铜豆荚杆的焊接成型是该类豆荚杆研制的难点之一,本文对铍青铜豆荚杆的储能点焊工艺进行了研究,分析了工艺参数及热处理对焊接接头名义剪切强度的影响,给出了优选的工艺参数为焊接电压180 V、保压7 s。在最佳工艺条件下成型并经过340℃/2 h时效处理后,焊接接头的名义剪切强度由52 MPa提高到68 MPa。铍青铜焊接接头的名义剪切断口随着焊接电压的增大,从焊接接头区域向热影响区转移。     

石墨烯及其衍生物在含能材料中的应用研究进展

含能材料具有高能高热、瞬时释放的特点,被广泛用于炸药、推进剂、烟火等领域,但其安全性和燃烧特性是限制其应用的两个关键因素。石墨烯及其衍生物(氧化石墨烯、硝基化石墨烯和氟化石墨烯等)具有高比表面积和优异的导热、导电等性能,在改善含能材料的安全和燃烧性能方面展现出较大的应用潜力。文章首先介绍了石墨烯及其衍生物在提高安全性能的最新研究进展,主要探讨了石墨烯、氧化石墨烯、硝基石墨烯和氟化石墨烯对降低含能材料敏感性的影响;然后,综述了石墨烯及其衍生物对含能材料燃烧性能的催化作用;最后对今后石墨烯在该领域的应用前景进行了展望。     

大航向角误差情况下飞行中对准研究

为了解决飞行器在大航向角误差的情况下进行飞行中对准的难题,将一种线性大航向角误差模型应用于飞行器飞行中对准的过程.详细推导了线性大航向角误差模型,设计了飞行器在大航向角误差情况下进行飞行中对准的卡尔曼滤波模型,并进行了数字仿真.仿真结果表明,线性大航向角误差模型应用于飞行器飞行中对准,能够很好地解决飞行器在大航向角误差情况下进行对准的难点,并给出了适合于大航向角误差模型的机动方式.最后,提出了线性大航向角误差模型在工程应用中的几点建议     

Single track and single layer formation in selective laser melting of niobium solid solution alloy

Selective laser melting (SLM) was employed to fabricate Nb-37Ti-13Cr-2Al-1Si (at%) alloy, using pre-alloyed powders prepared by plasma rotating electrode processing (PREP). A series of single tracks and single layers under different processing parameters was manufactured to evaluate the processing feasibility by SLM, including laser power, scanning speed, and hatch distance. Results showed that continuous single tracks could be fabricated using proper laser powers and scanning velocities. Both the width of a single track and its penetration depth into a substrate increased with an increase of the linear laser beam energy density (LED), i.e., an increase of the laser power and a decrease of the scanning speed. Nb, Ti, Si, Cr, and Al elements distributed heterogeneously over the melt pool in the form of swirl-like patterns. An excess of the hatch distance was not able to interconnect neighboring tracks. Under improper processing parameters, a balling phenomenon occurred, but could be eliminated with an increased LED. This work testified the SLM-processing feasibility of Nb-based alloy and promoted the application of SLM to the manufacture of niobium-based alloys.