富氢/富氧燃气同轴直流喷嘴燃烧过程数值模拟

为研究全流量补燃FFSC(Full Flow Staged Combustion)循环发动机气-气喷注器性能,以气氢/气氧(GH2/GO2)预燃室提供的758K富氢燃气和676K富氧燃气为推进剂对同轴直流喷嘴燃烧流场进行了数值模拟.考察了相同燃烧室结构、流量、入口燃气温度条件下,富氧燃气压降、富氢燃气和富氧燃气的速度比、氧喷嘴厚度和氧喷嘴缩进变化对燃烧性能的影响,获得了4个参数的影响规律.数值模拟结果对燃气气-气喷注器结构设计有参考价值.     

基于决策级数据融合的可靠性综合验证方法

可靠性验证试验是检验产品的可靠性水平是否达到要求而进行的试验,是一项重要的可靠性活动.价格昂贵或者可靠性水平较高的设备,按照经典的抽样方案进行试验,时间和费用几乎是不能承受的.为了解决上述实际问题,针对成功率的抽样检验方案,利用证据理论方法,研究了基于研制试验数据、可靠性评估结果和专家信息的基本可信度分配函数的构建方法,并给出了基于决策级数据融合的可靠性综合验证试验模型.同时,对可靠性综合验证模型的性质进行了讨论,确定了可靠性综合验证试验方案的存在性,并提出了方案的选取原则.模型可以广泛地利用研制信息,并可以统一给出基于不同分布类型和不同信息的可靠性综合验证试验方案.通过示例表明该方法可以利用各种研制信息,达到减少可靠性验证试验样本的目的.     

星载可展开天线热振动数值分析

根据非耦合动力学理论及有限元方法,研究分析了星载可展开天线的热振动。利用半正弦波温度冲击模拟热动力荷载,对天线典型节点的热振动位移和应力以及形面精度进行了数值分析。研究表明,急剧变化的温度荷载将导致该天线结构发生热振动,热振动响应明显大于静力学响应。     

抗辐射模拟CMOS集成电路研究与设计

为研究宇宙辐射环境中航天器里的模拟互补金属氧化物半导体(Complementary Metal Oxide Semiconductor,CMOS)集成电路性能和各种效应,并在辐射效应所产生机制的基础上,从设计和工艺方面提出了模拟CMOS集成电路主要抗辐射加固设计方法.在宇宙环境中,卫星中的模拟CMOS集成电路存在CMOS半导体元器件阈值电压偏离、线性跨导减小、衬底的漏电流增加和转角1/f噪声幅值增加.所以提出了3种对模拟CMOS集成电路进行抗辐射加固的方法:1)抗辐射模拟CMOS集成电路的设计;2)抗辐射集成电路版图设计;3)单晶半导体硅膜(Silicon on Insulator,SOI)抗辐射工艺与加固设计.根据上面的设计方法研制了抗辐射加固模拟CMOS集成电路,可以取得较好的抗辐射效果.     

粘弹性材料阻抗非局域特性实验验证

基于材料透射阻抗的定义阐述了粘弹性材料的局域和非局域性质,并阐述了阻抗矩阵和频响函数矩阵之间的关系.通过将声压表面力的分布离散为等效点力的方法导出了频响函数表达式.基于频响函数矩阵元素的表达式,对粘弹性材料平板进行了点力激振下振动透射的频响测量实验,同时用粘弹性有限元方法数值计算了该板的振动频率响应,实验和数值结果的一致不但验证了粘弹性材料频率响应和声阻抗的非局域特性,也说明了实验及数值方法的正确,为进一步研究打下基础.     

Autonomous navigation of Mars probe using X-ray pulsars: Modeling and results

Autonomous navigation of Mars probe is a main challenge due to the lack of dense ground tracking network measurements. In this paper, autonomous navigation of the Mars probe Orbits is investigated using the X-ray pulsars. A group of X-ray pulsars with high ranging accuracy are selected based on their properties and an adaptive extended Kalman filter is developed to incorporate the Mars probe dynamics and pulsar-based ranging measurements. Results of numerical experiment show that the three-dimensional positioning accuracy can achieve 750m in X-axis, 220m in Y-axis and 230m in Z-axis, which is much better than the positioning results by current Very Long Baseline Interferometry (VLBI) or Doppler observations with the accuracy of 150 km or several kilometers, respectively.     

New results and questions of lunar exploration from SELENE,Chang’E-1, Chandrayaan-1 and LRO/LCROSS

The moon has longstanding questions such as lunar environments, origin, formation and evolution, magnetization of crustal rocks, internal structure and possible life. The recent lunar missions, e.g., SELenological and ENgineering Explorer “KAGUYA” (SELENE), Chang’E-1, Chandrayaan-1, and Lunar Reconnaissance Orbiter/Lunar CRater Observation and Sensing Satellite (LRO/LCROSS), have provided new opportunities to explore and understand these issues. In this paper, we reviewed and presented the results and findings in the fields of lunar gravity, magnetic field, atmosphere, surface geomorphology and compositional variations, volcano, craters, internal structure, water and life science from new lunar exploration missions. In addition, the new objectives and scientific questions on lunar explorations in near future are presented and discussed.     

Introduction to the Payloads and the Initial Observation Results of Chang＇E-1

Chang'E-1,the orbiter circling the moon 200km above the moon surface,is the first Chinese Lunar exploration satellite.The satellite was successfully launched on 24th October 2007.There are 8 kinds of scientific payloads onboard,including the stereo camera,the laser altimeter,the Sagnac-based interferometer image spectrometer,the Gamma ray spectrometer,the X-ray spectrom-eter,the microwave radiometer,the high energy particle detector,the solar wind plasma detector and a supporting payload data management system.Chang'E-1 opened her eyes to look at the moon and took the first batch of lunar pictures after her stereo camera was switched on in 20th November 2007.Henceforth all the instruments are successfully switched on one by one.After a period of parameter adjustment and initial check out,all scientific instruments are now in their normal operating phase.In this paper,the payloads and the initial observation results are introduced.     

Hypervelocity impact induced shock acoustic emission waves for quantitative damage evaluation using in situ miniaturized piezoelectric sensor network

Manmade debris and natural meteoroids, travelling in the Low Earth Orbit at a speed of several kilometers per second, pose a severe safety concern to the spacecraft in service through the HyperVelocity Impact(HVI). To address this issue, an investigation of shock Acoustic Emission(AE) waves induced by HVI to a downscaled two-layer Whipple shielding structure is performed,to realize a quantitative damage evaluation. Firstly a hybrid numerical model integrating smoothparticle hydrodynamics and finite element is built to obtain the wave response. The projectiles, with various impact velocities and directions, are modelled to impact the shielding structure with different thicknesses. Then experimental validation is carried out with built-in miniaturized piezoelectric sensors to in situ sense the HVI-induced AE waves. A quantitative agreement is obtained between numerical and experimental results, demonstrating the correctness of the hybrid model and facilitating the explanation of obtained AE signals in experiment. Based on the understanding of HVI-induced wave components, assessment of the damage severity, i.e., whether the outer shielding layer is perforated or not, is performed using the energy ratio between the regions of ‘‘high frequency" and ‘‘low frequency" in the acquired AE signals. Lastly, the direct-arrival fundamentalsymmetric wave mode is isolated from each sensing signal to be input into an enhanced delay-andsum algorithm, which visualizes HVI spots accurately and instantaneously with different sensor network configuration. All these works demonstrate the potential of quantitative, in situ, and real time HVI monitoring using miniaturized piezoelectric sensor network.     

星载相控阵GNSS-R测高系统设计与实验

星载GNSS-R测高系统采用多波束相控阵天线和干涉互相关处理方式,接收北斗导航卫星和GPS导航卫星发射的L波段导航直射信号与海面反射信号,进行海面高度探测。详细介绍GNSS-R测高系统设计与实现、集成和外场试验等,外场试验不仅验证了相控阵GNSS-R测高系统功能,更重要的是验证了核心软件算法的正确性。GNSS-R测高系统适用于中尺度海洋现象的观测,可在时间和空间尺度上扩展雷达高度计的观测能力,并与之相互补充,有利于对复杂海面的中尺度结构进行较高时间分辨率的观测。GNSS-R测高仪为星载高精度海面高度探测提供了新型载荷。