分子污染光学效应试验研究

卫星有机材料放气产生的分子污染是卫星在轨污染的重要来源。分子污染会造成敏感表面光学性能退化甚至失效,因此必须进行评估分析。文章对在卫星真空热试验中,采用光学试片进行污染光学效应测试的数据进行了分析,并且与国内外试验数据进行了比对,发现光学试片测得的透过率损失数据较为保守,分析原因是光学试片污染沉积为液滴状,导致散射损失较大。     

卫星真空热试验污染物成分分析

在真空热试验过程中进行了污染物的采集及成分分析试验。利用污染采集板收集污染物,丙酮溶液洗脱污染物,气相色谱-质谱联用方法对污染物进行成分分析。确定了整星热试验和太阳电池板热试验中的主要污染物成分为硅氧烷和邻苯二甲酸酯,并对两种污染物的影响进行了分析。     

飞机起落架系统动力学建模与仿真

飞机地面滑跑时通过起落架系统与地面相互作用,由于作用于飞机的力和 力矩的变化,起落架将产生一定的缓冲,从而导致飞机滑跑过程中姿态角的改变.为了研究 飞机地面滑跑特性,考虑到滑跑过程中飞机姿态和转动的影响,建立了飞机起落架系统的轮 胎模型、空气油液缓冲模型、起落架走步模型和主机轮刹车装置模型.将建立的起落架系统 模型应用到飞机滑跑的六自由度模型中,分别在防滑刹车和前轮操纵两种情况下进行仿真验 证.结果表明,所建立的起落架系统模型是正确的,为进一步研究飞机地面滑跑特性奠定了基 础.      

基于GPU的干涉测量VDIF格式数据编帧方法*

为提高深空测控网VLBI基带转换器灵活性和多种数据格式适应能力,设计一种基于GPU的VDIF格式数据编帧方法。基于CUDA并行运算架构开发符合VDIF规范的帧头计算模块、多通道单线程编帧模块和多通道多线程编帧模块。为了实现编帧过程效率的优化,设计基于纹理缓存查找表的数据量化方法和基于流式架构的多帧信号异步编帧方法。试验验证表明,设计的编帧方法结果正确,高效可靠,有望为我国深空测控干涉测量数据记录系统参与国际VLBI联合观测提供有效的支持。     

Theoretical study of flow ripple for an aviation axial-piston pump with damping holes in the valve plate

Based on the structure of a certain type of aviation axial-piston pump＇s valve plate which adopts a pre-pressurization fluid path （consisting a damping hole, a buffer chamber, and an orifice） to reduce flow ripple, a single-piston model of the aviation axial-piston pump is presented. This sin- gle-piston model comprehensively considers fluid compressibility, orifice restriction effect, fluid resistance in the capillary tube, and the leakage flow. Besides, the instantaneous discharge areas used in the single-piston model have been calculated in detail. Based on the single-piston model, a multi-piston pump model has been established according to the simple hydraulic circuit. The sin- gle- and multi-piston pump models have been realized by the S-function in Matlab/Simulink. The developed multi-piston pump model has been validated by being compared with the numerical result by computational fluid dynamic （CFD）. The effects of the pre-pressurization fluid path on the flow ripple and the instantaneous pressure in the piston chamber have been studied and opti- mized design recommendations for the aviation axial-piston pump have been given out.     

Three-dimensional Large Landing Angle Guidance Based on Two-dimensional Guidance Laws

 Both the design process and form of the three-dimensional (3D) suboptimal guidance law (3DSGL) are very complex. Therefore, we propose the use of two-dimensional (2D) guidance laws to meet the guidance requirements of 3D space. By analyzing the relationship between the flight-path angle and its projections on OXY and OXZ planes, we obtain the ideal design requirements of the guidance laws. Based on the requirements, we design a 2D suboptimal guidance law used in the horizontal plane; combining the 2D vertical suboptimal guidance law, we create a whole ballistic simulation of six degree-of-freedom. The results are compared with those using other three guidance modes in the case of large windage of the initial azimuth angle. When the proportional navigation guidance (PNG) law is used in the horizontal planes, the landing angle will obviously decrease. With the proposed guidance mode, the large landing angle can be realized and meet the guidance precision requirements. Moreover, the required overload can decrease to meet the control requirement. The effects of the proposed guidance mode are close to that of 3DSGL despite its very simple form.     

“嫦娥一号”卫星观测近月太阳风离子特征

"嫦娥一号"卫星的太阳风离子探测器(SWIDs)的科学目标是研究太阳风与月球的相互作用以及相应的近月空间等离子体环境。文章利用"嫦娥一号"卫星SWIDs探测器在2007年12月30日的观测数据对近月太阳风等离子体环境,包括向阳侧太阳风离子、"拾起"离子以及在月球尾迹边界处的太阳风离子的特征进行分析,得到以下主要观测结果:1)在慢速太阳风中观测到双峰结构,分别为太阳风中的氢离子和二价氦离子;2)在行星际磁场具有明显昏向(+By)分量期间,在月球向阳侧持续观测到有月表散射或反射后被拾起的太阳风离子;3)与入射的太阳风离子不同,这些拾起的太阳风离子具有明显的角度分布特征;4)在行星际磁场昏向(晨向)期间,太阳风中的氢离子在月球尾迹北半球的边界处呈现减速(加速)特征并进入尾迹;而并未发现氦离子进入尾迹的特征。"嫦娥一号"卫星的这些观测数据对于认识近月空间等离子体环境有着重要的意义。     

Matching design of hydraulic load simulator with aerocraft actuator

 This paper intends to provide theoretical basis for matching design of hydraulic load simulator (HLS) with aerocraft actuator in hardware-in-loop test, which is expected to help actuator designers overcome the obstacles in putting forward appropriate requirements of HLS. Traditional research overemphasizes the optimization of parameters and methods for HLS controllers. It lacks deliberation because experimental results and project experiences indicate different ultimate performance of a specific HLS. When the actuator paired with this HLS is replaced, the dynamic response and tracing precision of this HLS also change, and sometimes the whole system goes so far as to lose control. Based on the influence analysis of the preceding phenomena, a theory about matching design of aerocraft actuator with HLS is presented, together with two paired new concepts of "Standard Actuator" and "Standard HLS". Further research leads to seven important conclusions of matching design, which suggest that appropriate stiffness and output torque of HLS should be carefully designed and chosen for an actuator. Simulation results strongly support that the proposed principle of matching design can be anticipated to be one of the design criteria for HLS, and successfully used to explain experimental phenomena and project experiences.     

An experimental study of the dual-loop control of electro-hydraulic load simulator （EHLS）

This paper investigates motion coupling disturbance（the so called surplus torque）in the hardware-in-the-loop（HIL）experiments.The＇＇velocity synchronization scheme＇＇was proposed by Jiao for an electro-hydraulic load simulator（EHLS）in 2004.In some situations,however,the scheme is limited in the implementation for certain reasons,as is the case when the actuator＇s valve signal is not available or it is seriously polluted by noise.To solve these problems,a＇＇dual-loop scheme＇＇is developed for EHLS.The dual-loop scheme is a combination of a torque loop and a position synchronization loop.The role of the position synchronization loop is to decouple the motion disturbance caused by the actuator system.To verify the feasibility and effectiveness of the proposed scheme,extensive simulations are performed using AMESim.Then,the performance of the developed method is validated by experiments.     

Low-cost precise measurement of oscillator frequency instability based on GNSS carrier observation

Global navigation satellite systems (GNSS) receivers can be used in time and frequency metrology by exploiting stable GNSS time scales. This paper proposes a low-cost method for precise measurement of oscillator frequency instability using a single-frequency software GNSS receiver. The only required hardware is a common radio frequency (RF) data collection device driven by the oscillator under test (OUT). The receiver solves the oscillator frequency error in high time resolution using the carrier Doppler observation and the broadcast ephemeris from one of the available satellites employing the onboard reference atomic frequency standard that is more stable than the OUT. Considering the non-stable and non-Gaussian properties of the frequency error measurement, an unbiased finite impulse response (FIR) filter is employed to obtain robust estimation and filter out measurement noise. The effects of different filter orders and convolution lengths are further discussed. The frequency error of an oven controlled oscillator (OCXO) is measured using live Beidou-2/Compass signals. The results are compared with the synchronous measurement using a specialized phase comparator with the standard coordinated universal time (UTC) signal from the master clock H226 in the national time service center (NTSC) of China as its reference. The Allan deviation (ADEV) estimates using the two methods have a 99.9% correlation coefficient and a 0.6% mean relative difference over 1–1000 s intervals. The experiment demonstrates the effectiveness and high precision of the software receiver method.