十块中国球粒陨石元素丰度特征研究

利用仪器中子活化分析方法,对宁强、随州、枣阳、南通、肇东、广南、东台、清镇、武安、导河等陨石进行了多元素分析测定.给出了近40种元素含量结果.并对各类球粒陨石微量元素丰度特征、REE丰度特征以及宁强陨石元素丰度特征进行了讨论.     

软件测试的度量方法及其应用

软件测试是找出软件中的错误,它是保证软件质量的关键,软件测试的度量是对影响软件测试的属性所进行的定量测量.本文简述了应用软件测试度量技术时所应具有的基本知识,通过一个实例,介绍并讨论了一种实用的关于软件测试进度安排和软件错误数的度量方法.     

NUMERICAL MODELLING OF VELOCITY AND TEMPERATURE DISTRIBUTIONS OF THE BUOYANCY CONVECTION EFFECT IN KNbO3 MELT

Numerical modelling of velocity and temperature fields in high-temperature KNbO3 melt of a loop-shaped Pt wire heater is carried out by using the commercial com putational code ANSYS for the mathematical solution of the governing equations.Based on the experimental boundary conditions and the Boussinesq approximation,the numerical modelling of a steady and two-dimensional model is applied to study the process under consideration of the buoyancy-driven convection condition. The result is compared with the previous experimental and theoretical data obtained in our laboratory, and the former is in agreement with the latter. Thus a theoretical guide for reasonable growth conditions is provided by studying in depth the real fluid flow effects in the crystal growth from the melt.     

Progress on Space Solar Telescope in 2004 - 2006

The progress on Chinese Space Solar Telescope (SST) in 2004-2006 is introduced. The scientific objectives are further clarified and the ground operation system has been planned. The 7 key technical problems of SST satellite platform and payloads have been tackled, which lay solid scientific and technological foundations for engineering prototype phase of the SST project. At present the SST project undergoes evaluation by CNSA and CAS so as to enter the engineering prototype phase of the SST project if it is finally approved.     

面天线检测数据处理方法的探讨

对面天线检测数据处理方法作了一些有益的探讨。从获取被测物的三维坐标后到获取真正有用的信息这一过程需要经过坐标转换和表面误差计算两个步骤 ,其中坐标转换是关键。在坐标转换方面 ,文中提出了曲面自由拟合、公共点转换和CAD面型转换三种方法 ,阐述了这些方法的数学模型 ,并且用实测数据进行了验证计算。理论分析和实际计算两方面显示 :CAD面型转换法既不需要天线的曲面方程 ,也不需要有已知的公共点 ,结果准确、可靠 ,是一种理想的方法 ;如果没有天线的CAD面型 ,但却存在公共点时 ,公共点转换法也是较理想的方法 ,其结果与给定的公共点误差有关 ;如果既没有天线的CAD面型又无公共点或公共点误差很大时 ,只能采用曲面自由拟合法 ,该法准确度最高 ,但容易使天线面型产生错位现象     

并行工程及其在航空电子产品研制中的应用

 概述了并行工程的运行特性,介绍了并行工程在空管应答机研制中的应用并分析了在缩短开发周期、提高产品质量、降低研制成本和改进售后服务方面的成效,总结了应用推广并行工程的经验与体会。     

根据施工法分析韩国建筑公司的质量管理现状

在迅速发展的市场环境中,决定建筑企业命运的是消费者的商品满意度[2]。商品的满意度来自商品的质量,因此企业必须通过确保质量管理来提高市场竞争力。以辨证法验证了各施工法全体项目资料的可信性。通过用Pearson卡方法对施工法中各项目的验证,综合分析了国内中小企业质量管理的现状。通过案例研究,探讨了将来持续有效发展建设质量管理的方向。这种案例研究统计资料是用SPSS/PC version 10.0处理的。     

Effect of Counterface Material on Friction and Wear Behavior of Ni-Cr-W-Al-Ti-MoS_2 Composites

Ni-Cr-W-Al-Ti-MoS2 self-lubricating composites were prepared through the powder metallurgy (P/M) method. Their friction properties were investigated by a pin-on-disk tribometer in the range from the room temperature to 600 ℃. Alumina, silicon nitride and nickel-iron-sulfide alloys were selected as the counterface materials. Results indicate that the lowest friction coefficients under 0.22 can be obtained at 600 ℃ when rubbed against alumina. When rubbed against nickel-iron-sulfide alloys, are presented the lowest wear rates in the magnitude of 10-6 mm3/N·m, one order of magnitude lower than those when rubbed against ceramics. In the case of three rubbing pairs, the wear rates of the composite containing MoS2 present themselves inversely proportional to friction coefficients. With alumina ceramics used as a counterface, transfer films and glaze layers will form on the contact surface playing a main role in lubrication at high temperatures. However, when silicon nitride and nickel-iron-sulfide alloy are used, the lubricating transfer films appear not to be promi-nent.     

基于阻力气动特性计算的飞艇艇身外形研究

采用SIMPLE算法、S-A湍流模型求解了三维不可压雷诺平均N-S方程,数值模拟了绕飞艇的低速不可压粘性流动,计算了不同艇身外形的阻力特性.本文方法计算结果与实验结果或其他文献的计算结果符合良好,可以用于飞艇的气动特性计算.通过对6个不同外形的相同体积飞艇阻力特性计算,得到了最佳艇身外形,表明本文方法可以用于艇身外形的选型设计.     

基于Convexity模型的航空公司利率风险管理

国际性特征日趋明显的中国航空公司正面临着金融市场上的诸多不确定性,其中利率风险日益凸显.将Convexity模型这一在西方发达国家较为成熟的风险管理工具引入中国,并将其应用到中国航空公司的风险管理实践,对利率风险进行了极为精确的量化评估,最后给出了相应的规避方法.