逆向涡流发生器减小涡轮叶尖泄漏流的数值研究

逆向涡流发生器可以有效减小涡轮叶尖泄漏流,提高叶片周向载荷.对影响逆向涡流器减小泄漏流的几个关键因素进行了数值研究,结果表明:入流和出流孔径比增大,涡流器流量增加,对叶尖泄漏流的减小效果越好,孔径比2∶1时比孔径比1∶1时涡流器流量增加了24%,叶尖泄漏流量降低了0.8%,叶片周向载荷提高了1%;与叶片前缘布置涡流器相比,在叶片中后部布置时涡流器流量增大,叶片周向载荷提高;涡流器布置越密,涡流器总流量增加,布置33个涡流器比布置9个涡流器叶尖泄漏流量降低了1.6%,叶片周向载荷提高了2.7%;出流角越小,叶尖泄漏流量越小,叶片周向载荷越大,出流角30°时泄漏流量比60°时降低了1.2%,叶片周向载荷提高了约2%.     

基于反馈线性化的可重复使用运载器上升段闭环制导

可重复使用运载器上升段轨迹跟踪是通过姿态跟踪间接实现的,采用开环制导方式,气动或者推力的不确定性可能会导致轨迹末端高度偏差较大,因此研究一种合适的闭环制导方式是非常必要的.本文采用基于输入输出反馈线性化的技术设计上升段标准轨道的跟踪方法,结合上升段飞行特点,动力爬升段和无动力爬升段分别通过反馈线性化技术将高度转化成与俯仰角和迎角的线性关系,然后通过线性系统技术设计闭环制导律,易于工程实现.非线性仿真结果表明,设计的制导策略能很好地实现轨迹跟踪.     

A New Method for Analyzing Integrated Stealth Ability of Penetration Aircraft

Taking into account the limitations of existing stealth performance analysis methods, a method termed as the integrated stealth performance analysis method is proposed for evaluating the stealth ability of the penetration aircraft. Based on various target radar cross section (RCS) scattering characters, this article integrates the relevant parameters needed for building up target circumferential RCS scattering model and proposes the RCS scattering controlling parameters to control the changing trends of the relevant model RCS scattering characters. According to the radar dynamic detecting characters during the whole penetration course, a dynamic stealth performance evaluating model is proposed accompanied by a series of stealth ability estimation rules. This new analysis method can enhance the integrality and dependability of the stealth analysis conclusions and summarize the relationship between the target RCS scattering characters and their effects on stealth performance. The rules indicated by this relationship can be used as the reference for designing new type of stealth aircraft and setting up specific penetration tactics.     

Multi-frequency RCS Reduction Characteristics of Shape Stealth with MLFMA with Improved MMN

Three new control factors are presented for calculating the multipole mode number (MMN) efficiently and precisely. The effects of these control factors on the number of integral samples and the precision of multilevel fast multipole algorithm (MLFMA) are investigated. A new approach based on control factors which is proven to be able to improve the computational efficiency and reduce the needed memory significantly as well as ensuring the proper precision. For three aircraft models, the improved MLFMA is employed to analyze their multi-frequency scattering characteristics. It is found that aircraft shape can influence radar cross section (RCS) in different frequency zones. Both the multi-frequency RCS reduction characteristics of shape stealth aircraft and the conventional aircraft with stealth design taken into account are investigated, and the results show that shape stealth exhibits significant RCS reduction in the resonance and high-frequency zones, and with a weaker influence in the Rayleigh zone. Compared with radar absorbing material (RAM), shape stealth yields a wider multi-frequency RCS reduction. The above-mentioned results can be applied to stealth design for multiple frequencies or even for all frequencies.     

碳酚醛-铝板中二维X射线热击波数值模拟

文章利用平面应变正交各向异性材料率相关性的弹塑性本构模型和各向同性材料理想弹塑性本构模型,采用有限元方法编写程序,对X射线辐照碳酚醛-铝板时诱导的热击波进行数值模拟,讨论了热击波的传播规律。结果表明,在1 keV的 X射线辐照下,X射线穿透极浅,材料表面发生气化现象,应力峰值较大;在3 keV的X射线辐照下,X射线穿透较深,热击波呈现双波结构,材料的层裂更明显。     

空间微小碎片撞击对太阳能电池性能影响

文章利用中国科学院空间科学与应用研究中心的等离子体驱动微小碎片加速器,进行了空间微小碎片累积撞击太阳能电池的模拟试验。之后,利用体式显微镜统计出太阳能电池表面的撞击坑,并测量了撞击前后太阳能电池的开路电压、短路电流、最大输出功率等参数的变化。试验结果与理论分析揭示了引起太阳能电池功率衰减的主要原因是碎片累积撞击导致的太阳能电池表面损伤。     

基于空间变异特性的格网电离层延迟估计方法

广域增强系统采用格网模型校正用户电离层延迟误差,为保证理想的校正效果,必须精确估计格网点电离层延迟。电离层延迟的空间相关性是完成这一估计的理论依据。针对传统反距离加权法因不能准确描述这种空间相关性而使得估计效果受限的问题,依据空间统计学原理建立了电离层延迟空间变异函数模型,提出一种新的权值计算方法,并通过实际观测数据进行了仿真验证。结果表明,相比于传统方法,这一方法能明显改善格网点电离层延迟估计效果,尤其在穿透点观测数据稀疏的区域,其改善效果更为明显。     

Particle flters for probability hypothesis density flter with the presence of unknown measurement noise covariance

In Bayesian multi-target fltering,knowledge of measurement noise variance is very important.Signifcant mismatches in noise parameters will result in biased estimates.In this paper,a new particle flter for a probability hypothesis density（PHD）flter handling unknown measurement noise variances is proposed.The approach is based on marginalizing the unknown parameters out of the posterior distribution by using variational Bayesian（VB）methods.Moreover,the sequential Monte Carlo method is used to approximate the posterior intensity considering non-linear and non-Gaussian conditions.Unlike other particle flters for this challenging class of PHD flters,the proposed method can adaptively learn the unknown and time-varying noise variances while fltering.Simulation results show that the proposed method improves estimation accuracy in terms of both the number of targets and their states.     

Quality variation of GPS satellite clocks on-orbit using IGS clock products

Over 60% clocks on board of the GPS satellites are working longer than their designed life. Therefore realizing their stabilities in a long time scales is essential to GPS navigation and positioning plus IGS time scale maintaining. IGS clock products from 2001 to 2010 are used to analyze the GPS satellite clock qualities such as frequency stabilities and clock noise level. We find out that for the clocks of Block IIA satellites the frequency stabilities and clock noise are 10 times worse than that of the Block IIR and IIR-M satellites. Moreover, the linear relationships between frequency stabilities and clock residuals have been deduced with an accuracy of better than 0.02 ns. Specially, it is noticed that the clock of the PRN27 is instable and the relationship between the frequency stability and residuals is at least a quadratic curve. Therefore, we suggested that GPS satellite clocks should be weighted by their quality levels in application, and the observations of the Block IIA should not be used for real-time positioning which required precision better than one meter.     

Finite element reconstruction approach for on-orbit spacecraft breakup dynamics simulation and fragment analysis

Breakup model is the key area of space debris environment modeling. NASA standard breakup model is currently the most widely used for general-purpose. It is a statistical model found based on space surveillance data and a few ground-based test data. NASA model takes the mass, impact velocity magnitude for input and provides the fragment size, area-to-mass ratio, velocity magnitude distributions for output. A more precise approach for spacecraft disintegration fragment analysis is presented in this paper. This approach is based on hypervelocity impact dynamics and takes the shape, material, internal structure and impact location etc. of spacecraft and impactor, which might greatly affect the fragment distribution, into consideration. The approach is a combination of finite element and particle methods, entitled finite element reconstruction (FER). By reconstructing elements from the particle debris cloud, reliable individual fragments are identified. Fragment distribution is generated with undirected graph conversion and connected component analysis. Ground-based test from literature is introduced for verification. In the simulation satellite targets and impactors are modeled in detail including the shape, material, internal structure and so on. FER output includes the total number of fragments and the mass, size and velocity vector of each fragment. The reported fragment distribution of FER shows good agreement with the test, and has good accuracy for small fragments.