激光选区烧结金属粉末的研究

A series of experiments are carried out with selective laser sintering(SLS) for copper,copper-nickel powder matetials.The phenomena of the sintering process is ana-lyzed,the influence of techmological parameters is dis-cussed in detail,By means of SEM with energy spectrum system and X-ray diffraction spectrum,the morphology of the microstructure and the compositions of the different zones are analyzed,the mechanism of the laser sintering metallic powders is preliminarily explored,All those above lay the foundations for the forming metal parts by laser sintering metallic powders.     

直升机旋翼旋转状态下浆叶固有频率的测试

直升机旋翼固有频率的合理配置是其动力学设计的关键之一，除了分析计算外，在型号研制中还必须进行试验校验。本文介绍了一种对全尺寸旋翼在旋转状态下通过自动倾斜器激振，对应变响应的分析找出其固有频率的试验方法。针对旋翼试验中干扰因素多等特点，提出了一种将时域数据分段处理的新方法，在找挥舞二阶固有频率的过程中，经过认真的分析研究，对一个与之接近的频率给出了合理的解释。     

研究计划管理系统的Petri网论法

本文以图的形式给出Petri网的定义;通过导入“时间Place”和“象征”的附加描述,使Petri网成为扩充的Petri网(EPN);用EPN模拟计划管理系统,用EPN仿真器构画计划管理系统的图模型、求系统的时间参数、进行系统的优化。     

有限大平板中圆孔的应力集中计算

本文应用广义变分原理,给出了含圆孔的有限大平板应力集中的计算公式。並对矩形板单向均匀拉伸和剪切两种情况进行了数值计算,将计算结果绘成了曲线。     

柔性航天器姿态机动的时间次优反馈控制

研究了由一个中心刚体带若干柔性附件的航天器姿态反馈控制问题。利用相平面分析的方法给出了一种近似时间最优的反馈开关控制逻辑。仿真结果表明，些控制逻辑能够实现静止一静止的姿态机动，并且对附件振动有抑制作用。     

Performance improvement of real-time PPP ambiguity resolution using a regional integer clock

Obtaining reliable GNSS uncalibrated phase delay (UPD) or integer clock products is the key to achieving ambiguity-fixed solutions for real-time (RT) precise point positioning (PPP) users. However, due to the influence of RT orbit errors, the quality of UPD/integer clock products estimated with a globally distributed GNSS network is difficult to ensure, thereby affecting the ambiguity resolution (AR) performance of RT-PPP. In this contribution, by fully utilising the consistency of orbital errors in regional GNSS network coverage areas, a method is proposed for estimating regional integer clock products to compensate for RT orbit errors. Based on Centre National d’Études Spatiales (CNES) RT precise products, the regional GPS/BDS integer clock was estimated with a CORS network in the west of China. Results showed that the difference between the estimated regional and CNES global integer clock/bias products was generally less than 5 cm for GPS, whereas clock differences of greater than 10 cm were observed for BDS due to the large RT orbit error. Compared with PPP using global integer clock/bias products, the AR performance of PPP using the regional integer clock was obviously improved for four rover stations. For single GPS, the horizontal and vertical accuracies of ambiguity-fixed PPP solutions were improved by 56.2% and 45.3% on average, respectively, whereas improvements of 67.5% and 50.5% in the horizontal and vertical directions, respectively, were observed for the combined GPS/BDS situation. Based on a regional integer clock, the RMS error of a kinematic ambiguity-fixed PPP solution in the horizontal direction could reach 0.5 cm. In terms of initialisation time, the average time to first fix (TTFF) in combined GPS/BDS PPP was shortened from 18.2 min to 12.7 min. In view of the high AR performance realised with the use of regional integer clocks, this method can be applied to scenarios that require high positioning accuracy, such as deformation monitoring.     

Integrated guidance and control for solar sail station-keeping with optical degradation

Current control approaches for solar sail station-keeping on libration point orbits have not considered the degradation of the sail’s optical properties. However, significant optical degradation could lead to poor station-keeping performance or even complete failure. This paper presents an integrated guidance and control strategy to address this problem by updating the reference orbit based on in situ estimation. An exponential optical degradation model is incorporated into the solar radiation acceleration model, and an on-line reference orbit update approach is incorporated into the station-keeping, coupled with an active disturbance rejection controller. The reflection coefficient is estimated on-line and the reference orbit is updated discretely when the optical properties have degraded by a prescribed amount. This strategy provides discrete updates to the reference orbits such that the perturbation due to the optical degradation is maintained within a small range. These smaller perturbations can be dealt with by the controller’s robustness and station-keeping can be sustained for long durations even in the presence of large optical degradation.     

An update global model of hmF2 from values estimated from ionosonde and COSMIC/FORMOSAT-3 radio occultation

In this paper, we present our recent work on developing an updated global model of the ionospheric F2 peak height hmF2 parameter by combining data from the Constellation Observing System for Meteorology, Ionosphere and Climate (COSMIC/FORMOSAT-3) radio occultation (RO) measurements and from the extended global ionosonde stations. In particular, 10 Chinese ionosonde stations’ data are newly introduced into this study. The modeling technique used is based on a two-layer empirical orthogonal function (EOF) expansion. Global distributions of hmF2 maps calculated using the newly constructed global model and the one provided by the International Reference Ionosphere model (IRI-ITU-R) are compared with the global distributions of hmF2 obtained by the COSMIC RO measurements and quantitative statistical analysis of the differences between the model results and those of the COSMIC RO measurements is made for the low (2008) and high (2012) solar activity years. The obtained average root-mean-square differences (RMSEs) for our model are 27.7 km (11.1%) and 31.0 km (9.8%), respectively for the years 2008 and 2012, whereas those for the IRI-ITU-R model are 39.9 km (16.9%) and 35.0 km (11.6%), respectively. Comparison of the results calculated both by our model and the IRI-ITU-R model with the digisonde observation is also made. The comparisons show that the newly constructed global hmF2 model can reproduce reasonably well the observations and perform better than IRI-ITU-R model.     

Global characteristics of ionospheric electric fields and disturbances during the first hours of magnetic storms

The ionospheric plasma density can be significantly disturbed during magnetic storms. In the conventional scenario of ionospheric storms, the negative storm phases with plasma density decreases are caused by neutral composition changes, and the positive storm phases with plasma density increases are often related to atmospheric gravity waves. However, recent studies show that the global redistribution of the ionospheric plasma is dominated primarily by electric fields during the first hours of magnetic storms. In this paper, we present the measurements of ionospheric disturbances by the DMSP satellites and GPS network during the magnetic storm on 6 April 2000. The DMSP measurements include the F region ion velocity and density at the altitude of ∼840 km, and the GPS receiver network provides total electron content (TEC) measurements. The storm-time ionospheric disturbances show the following characteristics. The plasma density is deeply depleted in a latitudinal range of ∼20° over the equatorial region in the evening sector, and the depletions represent plasma bubbles. The ionospheric plasma density at middle latitudes (20°–40° magnetic latitudes) is significantly increased. The dayside TEC is increased simultaneously over a large latitudinal range. An enhanced TEC band forms in the afternoon sector, goes through the cusp region, and enters the polar cap. All the observed ionospheric disturbances occur within 1–5 h from the storm sudden commencement. The observations suggest that penetration electric fields play a major role in the rapid generation of equatorial plasma bubbles and the simultaneous increases of the dayside TEC within the first 2 h during the storm main phase. The ionospheric disturbances at later times may be caused by the combination of penetration electric fields and neutral wind dynamo process.     

Evaluation of global modeling of M(3000)F2 and hmF2 based on alternative empirical orthogonal function expansions

Global modeling of M(3000)F2 and hmF2 based on three alternative EOF (empirical orthogonal function) expansion methods is described briefly. Data used for the model construction is the monthly median hourly values of M(3000)F2 from the ionosonde/digisonde stations distributed around the world for the period of 1975–1985 and the hmF2 data of the same period converted from the measured M(3000)F2 based on the strong anti-correlation existing between them. Independent data of a low (1965) and a high (1970) solar activity year are used to validate the three alternative models based on different EOF expansion methods. Comparisons between the modeled results and observed data for both the low (1965) and high (1970) solar activity years showed good agreement for both M(3000)F2 and hmF2 parameters. Statistical analysis on the differences between model values and observed data showed that all the three alternative models (Model A, B and C) based on the different EOF expansion methods have better agreement with the observed data than the models currently used in IRI. All three alternative EOF based models have almost the same accuracy. Discussion on the preference of the three alternative EOF based models is given.