复合材料叠层结构剖面翘曲修正理论

 首先假设复合材料叠层结构的面内位移沿厚度方向为直线分布,然后根据剪切变形进行连续修正,获得逐步升高的各阶翘曲位移分布函数。文中以叠层梁为例,应用最小势能原理导出其静力方程和力的边界条件。在长度方向则采用升阶谱位移函数,进行了数值计算。所得叠层梁的位移和应力分布的数值结果与精确解相比,表明本文方法有很好的收敛性。     

叉流管－管型换热器二维温度场的数值分析

建立并导出叉流管－管型换热器传热过程的二维数学模型及相应的差分格式，对比实验数据和性能计算结果，表明数值方法是有效可行的。据此编制的计算机程序已成功地用于组合发动机空气预冷换热器工作过程的预测。     

关于厚薄板弯曲分析的内位移杂交元法

 本文通过引入单元内位移和优化处理的单元应力场,以计入剪切变形的板弯曲能量泛函为基础,导出适用于厚、薄板分析的四边形杂交应力元。内力场和内位移的合理选择避免了单元零能模式的出现、避免了解的剪切自锁现象。该优化单元显示了较好的通用性和收敛性。对关于剪切自锁的RCI判据提出了反例、说明了它的局限性。     

复合材料板壳在过屈曲下最佳铺层设计的工程方法

 本文基于相同边界条件下铺层构成对失稳后的变形形态影响不大的基本假设,根据理论和实践经验得到的准最佳铺层失稳后的位移场为基础,给出了确定最佳铺层参数的工程方法。计算表明,其基本假设和解题思路是正确的。由于本方法最后归结为解一个一元三次方程,使计算大为简化,可降低设计成本和周期,在工程设计中具有实际意义。     

一种排除带凸肩风扇叶片榫头故障的新方法

探索了一种采取黏弹性橡胶阻尼器抑制带凸肩风扇工作叶片共振的新途径,通过应用于某型机风扇第1级叶片,在叶片结构不变的条件下排除了其榫头断裂故障。在发动机上的验证结果表明:根部橡胶阻尼器减振结构对叶片榫头出现最大振动应力的振型的抑制效果明显,从而拓展了黏弹性材料的应用领域。     

天线分析仪控制系统的研制

介绍了天线分析仪控制系统研制过程中的硬件设计关键技术,并提出了轴角转换器控制卡的设计方案,实验表明该方案具有一定的实用性与通用性。     

液氮纯度分析的偏差及修正

液氮纯度是液氮产品非常关键的一个技术指标.液氮纯度的在线跟踪测量是通过测量液氮中的氧含量来实现的.在多年来的液氮在线分析及液氮出库分析过程中,发现氧含量测量结果普遍偏低.本文通过理论分析及大量的实验数据,找到了数据产生偏差的原因,并给出了科学的修正办法,为以后液氮生产过程中更加有效地控制产品质量打下了基础.     

Magnetosphere Imaging Instrument (MIMI) on the Cassini Mission to Saturn/Titan

The magnetospheric imaging instrument (MIMI) is a neutral and charged particle detection system on the Cassini orbiter spacecraft designed to perform both global imaging and in-situ measurements to study the overall configuration and dynamics of Saturn’s magnetosphere and its interactions with the solar wind, Saturn’s atmosphere, Titan, and the icy satellites. The processes responsible for Saturn’s aurora will be investigated; a search will be performed for substorms at Saturn; and the origins of magnetospheric hot plasmas will be determined. Further, the Jovian magnetosphere and Io torus will be imaged during Jupiter flyby. The investigative approach is twofold. (1) Perform remote sensing of the magnetospheric energetic (E > 7 keV) ion plasmas by detecting and imaging charge-exchange neutrals, created when magnetospheric ions capture electrons from ambient neutral gas. Such escaping neutrals were detected by the Voyager l spacecraft outside Saturn’s magnetosphere and can be used like photons to form images of the emitting regions, as has been demonstrated at Earth. (2) Determine through in-situ measurements the 3-D particle distribution functions including ion composition and charge states (E > 3 keV/e). The combination of in-situ measurements with global images, together with analysis and interpretation techniques that include direct “forward modeling’’ and deconvolution by tomography, is expected to yield a global assessment of magnetospheric structure and dynamics, including (a) magnetospheric ring currents and hot plasma populations, (b) magnetic field distortions, (c) electric field configuration, (d) particle injection boundaries associated with magnetic storms and substorms, and (e) the connection of the magnetosphere to ionospheric altitudes. Titan and its torus will stand out in energetic neutral images throughout the Cassini orbit, and thus serve as a continuous remote probe of ion flux variations near 20R _S (e.g., magnetopause crossings and substorm plasma injections). The Titan exosphere and its cometary interaction with magnetospheric plasmas will be imaged in detail on each flyby. The three principal sensors of MIMI consists of an ion and neutral camera (INCA), a charge–energy–mass-spectrometer (CHEMS) essentially identical to our instrument flown on the ISTP/Geotail spacecraft, and the low energy magnetospheric measurements system (LEMMS), an advanced design of one of our sensors flown on the Galileo spacecraft. The INCA head is a large geometry factor (G ∼ 2.4 cm² sr) foil time-of-flight (TOF) camera that separately registers the incident direction of either energetic neutral atoms (ENA) or ion species (≥5^∘ full width half maximum) over the range 7 keV/nuc < E < 3 MeV/nuc. CHEMS uses electrostatic deflection, TOF, and energy measurement to determine ion energy, charge state, mass, and 3-D anisotropy in the range 3 ≤ E ≤ 220 keV/e with good (∼0.05 cm² sr) sensitivity. LEMMS is a two-ended telescope that measures ions in the range 0.03 ≤ E ≤ 18 MeV and electrons 0.015 ≤ E≤ 0.884 MeV in the forward direction (G ∼ 0.02 cm² sr), while high energy electrons (0.1–5 MeV) and ions (1.6–160 MeV) are measured from the back direction (G ∼ 0.4 cm² sr). The latter are relevant to inner magnetosphere studies of diffusion processes and satellite microsignatures as well as cosmic ray albedo neutron decay (CRAND). Our analyses of Voyager energetic neutral particle and Lyman-α measurements show that INCA will provide statistically significant global magnetospheric images from a distance of ∼60 R _S every 2–3 h (every ∼10 min from ∼20 R _S). Moreover, during Titan flybys, INCA will provide images of the interaction of the Titan exosphere with the Saturn magnetosphere every 1.5 min. Time resolution for charged particle measurements can be < 0.1 s, which is more than adequate for microsignature studies. Data obtained during Venus-2 flyby and Earth swingby in June and August 1999, respectively, and Jupiter flyby in December 2000 to January 2001 show that the instrument is performing well, has made important and heretofore unobtainable measurements in interplanetary space at Jupiter, and will likely obtain high-quality data throughout each orbit of the Cassini mission at Saturn. Sample data from each of the three sensors during the August 18 Earth swingby are shown, including the first ENA image of part of the ring current obtained by an instrument specifically designed for this purpose. Similarily, measurements in cis-Jovian space include the first detailed charge state determination of Iogenic ions and several ENA images of that planet’s magnetosphere.This revised version was published online in July 2005 with a corrected cover date.     

直升机抗坠毁座椅用智能气囊缓冲器初步研究

抗坠毁座椅是提高直升机安全性的重要措施。本文首次研究了应用于直升机抗坠毁座椅的智能气囊缓冲器，论述了智能气囊缓冲器在直升机上应用的可行性。智能气囊采用了智能材料与结构新概念设计．可提高缓冲器的性能。与其它缓冲器比较，智能气囊能主动控制冲击过载，可使坠撞事故中乘员受到的冲击过载更为平缓，提高缓冲保护的有效性。初步实验结果证实智能气囊缓冲器的原理是正确的。     

基于VXI总线的检测软件设计

基于VXI总线和虚拟仪器技术，研制开发了用于外场的模拟式电子控制器检测软件，并对软件开发的过程和要求进行了分析，重点解决了程序设计中的需求分析和模块化设计问题。