环控系统减少引气量和降低燃油代偿损失研究

随着能源问题越来越突出,降低环控系统燃油代偿损失显得越来越重要。针对这个问题,综述了当前应用研究中降低燃油代偿的不同方法,并重点对闭式循环制冷系统和考虑载荷因子的引气系统在减少引气量和降低燃油代偿损失方面进行了探讨。     

基于Fratar模型的航班时刻需求战略预测方法

航班时刻是机场运行的基础和核心,准确预测机场的航班时刻需求,对于指导机场基础设施建设、运行模式调整等具有重要意义。在航班计划结构信息分析的基础上,构建了全国航班O-D矩阵,建立了多层级机场起降量预测模型,并以起降量预测结果为输入,利用Fratar交通分布预测模型,预测目标机场时刻需求。以杭州萧山机场为例,以2010年为基年,2014为预测年,验证了方法的准确性和可行性,并预测了2020年航班时刻需求,分析了不同运行模式下机场理论容量与航班时刻需求的匹配状况,分析结果表明,2020年萧山机场需由隔离运行模式过渡到相关进近,方能满足时刻需求。     

石英挠性加速度计阻尼参数闭环检测方法

石英挠性加速度计作为一种高精度惯性测量传感器,被广泛用于航天器姿态控制及惯性导航中。在石英挠性加速度计设计时,摆组件在腔体内的阻尼系数是一项重要的参数。与摆组件的转动惯量及挠性梁刚度等参数不同,阻尼系数与摆片的表面积、摆组件工作间隙、大气压强等多种因素相关。为了获取石英挠性加速度计正常工作状态下阻尼特性参数,研究了一种基于系统闭环频率响应的阻尼系数测量方法。利用水平振动台获取石英挠性加速度计幅频特性曲线,采用最小二乘参数拟合的方法对石英挠性加速度计阻尼特性参数进行辨识。利用辨识得到的阻尼系数进行仿真,并绘制幅频特性曲线与实际采样输出比对,验证了基于系统频率响应的闭环测量方法有效可行。     

基于仿生的大展弦比直机翼结构布局形式研究

为了探讨大展弦比直机翼的结构布局形式,借鉴自然界中的鱼骨和鸟羽毛以及树叶的叶脉形式,利用有限元分析与满应力优化作为设计手段,对三种不同的结构布局形式(A构型、B构型和常规构型)开展基于强度、刚度以及重量条件限制下的有关响应的对比研究.计算结果表明:在不同尺度的等重量条件限制下,"A构型"弯曲刚度最大,扭转刚度居中;"B构型"弯曲刚度居中,扭转刚度最小;"常规构型"弯曲刚度最小,扭转刚度最大.分析得出机翼的翼肋布置应该"适当的"倾斜.最后给出三点结论.     

Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.     

探讨飞行器翼身不同结构刚度对翼尖位移和结构重量的关系

为了研究大展弦比双机身布局无人机中翼身结构不同刚度对结构响应的影响,本文采用有限元分析与满应力优化相结合来探讨这一问题.计算结果表明:机翼与机身之间不同刚度对结构响应存在影响.建议结构设计时注意这一现象并加以利用,从而得到轻量化的结构设计.针对算例进一步计算与分析表明:采用本文方法得到的结构优化方案,同样也能够满足该飞机的静、动气弹要求.结论:采用本文方法,不仅可以研究飞机部件之间不同刚度对飞机结构响应的影响,还可以进行全机的结构方案设计,并对此方案进行刚度、强度、颤振和控制面效率的分析与评估.     

航天ATS快速测试体系结构研究

快速发射是未来空间信息作战和导弹武器发展面临的新课题,快速测试是快速发射的重要环节。航天ATS快速测试需要遵循一定的体系结构而发展。以国际通用测试系统体系结构为背景,结合我国航天测试的需求,提出了航天ATS快速测试体系结构,分析了航天ATS快速测试的测试流程并行化、关键参数连续监测化和测试数据处理快速化等目标,以及所涉及到的图形化程序开发、仪器可互换等关键技术。结论有利于促进航天ATS快速测试技术的进步,并为其发展提供参考。     

象州石龙客家话语音记略

广西象州县石龙镇外来人口众多,汉语方言复杂,客家话是一大方言.文章在实地调查基础上总结出石龙镇客家话的语音系统,对语音特点做了一些分析,制作了单字音声韵调配合表.     

碳硼复合渗研究及其应用

本文研究了２０钢和４５钢的碳硼复合渗渗层组织及耐磨性能。结果表明：复合渗可得到较强支撑作用的过渡层,从而使渗硼层耐磨性提高。饲料粉碎机锤片采用复合渗工艺处理后试用效果良好。     

GRACE gravity field modeling with an investigation on correlation between nuisance parameters and gravity field coefficients

The GRACE (Gravity Recovery And Climate Experiment) monthly gravity models have been independently produced and published by several research institutions, such as Center for Space Research (CSR), GeoForschungsZentrum (GFZ), Jet Propulsion Laboratory (JPL), Centre National d’Etudes Spatiales (CNES) and Delft Institute of Earth Observation and Space Systems (DEOS). According to their processing standards, above institutions use the traditional variational approach except that the DEOS exploits the acceleration approach. The background force models employed are rather similar. The produced gravity field models generally agree with one another in the spatial pattern. However, there are some discrepancies in the gravity signal amplitude between solutions produced by different institutions. In particular, 10%–30% signal amplitude differences in some river basins can be observed. In this paper, we implemented a variant of the traditional variational approach and computed two sets of monthly gravity field solutions using the data from January 2005 to December 2006. The input data are K-band range-rates (KBRR) and kinematic orbits of GRACE satellites. The main difference in the production of our two types of models is how to deal with nuisance parameters. This type of parameters is necessary to absorb low-frequency errors in the data, which are mainly the aliasing and instrument errors. One way is to remove the nuisance parameters before estimating the geopotential coefficients, called NPARB approach in the paper. The other way is to estimate the nuisance parameters and geopotential coefficients simultaneously, called NPESS approach. These two types of solutions mainly differ in geopotential coefficients from degree 2 to 5. This can be explained by the fact that the nuisance parameters and the gravity field coefficients are highly correlated, particularly at low degrees. We compare these solutions with the official and published ones by means of spectral analysis. It is found that our solutions are, in general, consistent with others in the spatial pattern. The water storage variations of the Amazon, Chari and Ganges river basins have also been computed. The variations computed with the NPARB approach are closer to those produced by JPL and DEOS solutions, while the variations produced with the NPESS approach are in good agreement with those produced by the CSR and GFZ solutions. A simulation study is implemented with considering realistic noise and low-frequency error. The two approaches are used to recover the true model. The NPESS solution appears closer to the true one. Therefore we are inclined to estimate the nuisance parameters simultaneously with the geopential coefficients.