从CIDS,CMS看客舱通信系统的发展

介绍了Ａ－３４０ＣＩＤＳ系统及Ｂｏｅｉｎｇ－７７７ＣＭＳ系统，分析了客舱通信系统的现状及发展，为航空公司在机型改装及设备配置时提供参考     

Drag derived altitude aided navigation method

The navigation problem of the lifting reentry vehicles has attracted much research interest in the past decade.This paper researches the navigation in the blackout zone during the reentry phase of the aircraft,when the communication signals are attenuated and even interrupted by the blackout zone.However,when calculating altitude,a pure classic inertial navigation algorithm appears imprecise and divergent.In order to obtain a more precise aircraft altitude,this paper applies an integrated navigation method based on inertial navigation algorithms,which uses drag derived altitude to aid the inertial navigation during the blackout zone.This method can overcome the shortcomings of the inertial navigation system and improve the navigation accuracy.To further improve the navigation accuracy,the applicable condition and the main error factors,such as the atmospheric coefficient error and drag coefficient error are analyzed in detail.Then the damping circuit design of the navigation control system and the damping coefficients determination is introduced.The feasibility of the method is verified by the typical reentry trajectory simulation,and the influence of the iterative times on the accuracy is analyzed.Simulation results show that iterative three times achieves the best effect.     

面向空间应用的高精度磁阻磁强计设计及性能测试

文章基于磁阻磁强计的工作原理,提出了高精度磁阻磁强计三分量探头和电子电路设计方案:改进磁强计三分量探头结构,以消除三分量磁畴间的相互干扰所引起的测量误差;采用交流耦合和闭环控制工作模式,以消除磁畴排列紊乱带来的影响,稳定磁强计的工作状态。关键性能指标的测试结果表明,磁阻磁强计在1 Hz点处的频谱噪声达到38 pT/(Hz)~(1/2),其噪声性能显著提高。另外,该磁阻磁强计采用微型化结构设计,便于安装,满足微小卫星的空间磁场探测的需求。     

JMP超高效率消防泵专用三相异步电动机的研发

JMP超高效率消防泵专用三相异步电动机是河南豫通电机股份公司与新乡市电机系统节能工程技术研究中心共同进行研究、设计、开发的新型节能专用电动机产品。其能效水平达到IE4能效等级。目前,产品开发已经完成,通过国外第三方能效检测机构的检测,取得了产品能效检测报告及出口许可的标识,并且已经批量出口到国外,得到国外客户的认可。介绍了该电动机的设计思路和样机检测结果。     

民用飞机驾驶舱布置设计方法研究

在当今民用飞机驾驶舱设计过程中,普遍公认的理念为"以人为中心"的驾驶舱设计理念,而驾驶舱布置设计要践行"以人为中心"的设计理念,就需要在国内民用飞机设计初期,探索一种能体现"以人为中心"的驾驶舱布置方法。主要以"设计眼位"为基准,以飞行员生理极限、认知特性和个体差异作为可达性、可视性设计参数的依据,探索出一种能用于设计初期指导驾驶舱布置过程中主要设计参数的制定方法。     

Estimation of GPS instrumental biases from small scale network

With 4 GPS receivers located in the equatorial anomaly region in southeast China, this paper proposes a grid-based algorithm to determine the GPS satellites and receivers biases, and at the same time to derive the total electron content (TEC) with time resolution of 15 min and spatial resolution of 1° by 3.5° in latitude and longitude. By assuming that the TEC is identical at any point within a given grid block and the biases do not vary within a day, the algorithm arranges unknown biases and TECs with slant path TEC from the 4 receivers’ observations into a set of equations. Then the instrumental biases and the TECs are determined by using the least squares fitting technique. The performance of the method is examined by applying it to the GPS receiver chain observations selected from 16 geomagnetically quiet days in four seasons of 2006. It is found that the fitting agrees with the data very well, with goodness of fit ranging from 0.452 TECU to 1.914 TECU. Having a mean of 0.9 ns, the standard deviations for most of the GPS satellite biases are less than 1.0 ns for the 16 days. The GPS receiver biases are more stable than that of the GPS satellites. The standard deviation in the 4 receiver bias is from 0.370 ns to 0.855 ns, with a mean of 0.5 ns. Moreover, the instrumental biases are highly correlated with those derived from CODE and JPL with independent methods. The typical precision of the derived TEC is 5 TECU by a conservative estimation. These results indicate that the proposed algorithm is valid and qualified for small scale GPS network.     

考虑时空基准差异的传递对准算法研究

给出了一种考虑时空基准差异的传递对准算法.该方法在构造传递对准量测时,将剩余时空配准误差增广为状态向量,建立了包含不同步时间、杆臂向量在内的传递对准模型.计算机仿真结果表明,对时空配准剩余误差进行建模补偿能够改善传递对准的性能.在要求快速高精度对准的情况下,考虑主子惯导时空配准剩余误差是必要的.     

直升机某部件飞行状态的载荷分布特点研究

结合直升机的飞行载荷特点及使用要求,采用某型直升机动部件飞行测量载荷数据,经过“三峰谷点”雨流计数法统计处理,对飞行中实测到的183个飞行状态分别进行统计处理,假设检验及回归分析,确定了每个飞行状态的载荷分布类型及飞行状态的损伤,最后压缩归并成对直升机某动部件产生较大损伤的18种飞行状态,并提出了飞行状态中载荷的分布类型对直升机动部件的寿命有较大的影响。     

大后翼与主流相互作用的模拟点火试验

论述了缩比模拟发动机中大后翼与主流的相互作用以及大后翼点火的工作状态。通过试验,得出了主流和大后翼相互作用时,缝底部产生的压强较翼缝外空腔高。在试验条件下,模拟后翼气流与前部气流相互作用时没有爆燃现象。     

带多个充液储箱航天器的耦合动力学建模方法

研究了充液航天器储箱内液体晃动与全星姿态运动的耦合动力学建模方法．分别基于单摆等效力学模型和质心面等效力学模型建立了全星姿态耦合动力学方程,并分别针对2个储箱串联布局、3个储箱并联布局的充液航天器在不同工况下的液体晃动问题进行了数值仿真研究;同时比较分析了两种储箱布局方案下液体晃动对航天器姿态运动的影响,为工程应用提供参考．