不同驱动电压波形对电润湿液体透镜驱动效率的影响

研制了测试电润湿液体透镜在驱动电压作用下变焦过程的装置，详细分析了测试机理，用该装置实验研究了交流电压、交直流混合电压及直流电压三种不同波形驱动电润湿液体透镜的变焦过程，结果表明交流电压的驱动效率最高，交直流混合电压驱动效率次之，直流电压驱动效率最低；并对这一结果作出了合理的解释。     

Influences of pre-torsion deformation on microstructure and mechanical properties of pure titanium subjected to subsequent tension deformation

A series of experimental studies was carried out to investigate the influences of pre-torsion on microstructure evolution, mechanical properties, and fracture appearance of pure titanium subjected to subsequent tension deformation. An introduction of pre-torsion strain can improve the materials’ mechanical properties through micro hardness evaluation. That is, the micro hardness of tensile samples with pre-torsion deformation is much higher than that of samples processed by single torsion or tension. It can be seen from the microstructure that pre-torsion deformation can be used to refine grains better and control grains’ morphology by combining subsequent tension. The results indicate that the grains are refined most evidently for tensile samples with 2 turn pre-torsion deformation. Moreover, fracture analysis indicates that tensile samples with pre-torsion strain can present good comprehensive performance. In conclusion, pre-torsion deformation plays an important role in improving comprehensive performance and controlling microstructure evolution on pure titanium subjected to later tension deformation.     

惯性平台系统摇摆条件下的漂移处理方法

惯性平台在摇摆条件下,由于轴端摩擦力矩的存在,导致在摇摆运动时影 响平台稳定性,引起平台各轴附加常值漂移。介绍了两种惯性平台摇摆条件下的漂移处 理方法, 第一种方法利用平台轴端框架角传感器的输出数据, 首先使用离散傅里叶变 换得到数据频谱, 其次根据数据频谱设计数字滤波器, 对得到的数据进行滤波处理, 最后使用线性回归法对滤波后的数据进行拟合, 从而得到摇摆条件下平台摇摆漂移; 第二种方法使用加速度计的输出, 根据敏感的加速度可以得到敏感轴与重力加速度的 角度, 由此计算出摇摆过程的漂移速度。实验表明, 频谱分析法可以进行三个方向的 计算, 但台体轴结果的稳定性不好; 加速度输出拟合方法虽只可进行两个方向的计 算,但稳定性较好。     

UMR: A utility-maximizing routing algorithm for delay-sensitive service in LEO satellite networks

This paper develops a routing algorithm for delay-sensitive packet transmission in a low earth orbit multi-hop satellite network consists of micro-satellites. The micro-satellite low earth orbit(MS-LEO) network endures unstable link connection and frequent link congestion due to the uneven user distribution and the link capacity variations. The proposed routing algorithm,referred to as the utility maximizing routing(UMR) algorithm, improve the network utility of the MS-LEO network for carrying flows with strict end-to-end delay bound requirement. In UMR, first, a link state parameter is defined to capture the link reliability on continuing to keep the end-to-end delay into constraint; then, on the basis of this parameter, a routing metric is formulated and a routing scheme is designed for balancing the reliability in delay bound guarantee among paths and building a path maximizing the network utility expectation. While the UMR algorithm has many advantages, it may result in a higher blocking rate of new calls. This phenomenon is discussed and a weight factor is introduced into UMR to provide a flexible performance option for network operator. A set of simulations are conducted to verify the good performance of UMR, in terms of balancing the traffic distribution on inter-satellite links, reducing the flow interruption rate,and improving the network utility.     

A novel in-plane mode rotary ultrasonic motor

Ultrasonic motors have the merits of high ratio of torque to volume, high positioning precision, intrinsic holding torque, etc., compared to the conventional electromagnetic motors. There have been several potential applications for this type of motor in aerospace exploration, but bearings and bonding mechanism of the piezoelectric ring in the motors limit the performance of them in the space operation conditions. It is known that the Langevin type transducer has excel- lent energy efficiency and reliability. Hence using the Langevin type transducer in ultrasonic motors may improve the reliability of piezoelectric motors for space applications. In this study, a novel in-plane mode rotary ultrasonic motor is designed, fabricated, and characterized. The proposed motor operates in in-plane vibration mode which is excited by four Langevin-type bending vibra- tors separately placed around a ring-shaped stator. Two tapered rotors are assembled to the inner ring of the stator and clamped together by a screw nut. In order to make the motor more stable and convenient to fix, a thin cylindrical support is placed under the stator ring. Due to its no-bearing structure and Langevin transducer excitation, the prototype ultrasonic motor may operate well in aeronautic and astronautic environments.     

An integrated graphic–taxonomic–associative approach to analyze human factors in aviation accidents

Human factors are critical causes of modern aviation accidents. However, existing accident analysis methods encounter limitations in addressing aviation human factors, especially in complex accident scenarios. The existing graphic approaches are effective for describing accident mechanisms within various categories of human factors, but cannot simultaneously describe inadequate human–aircraft–environment interactions and organizational deficiencies effectively, and highly depend on analysts' skills and experiences. Moreover, the existing methods do not emphasize latent unsafe factors outside accidents. This paper focuses on the above three limitations and proposes an integrated graphic–taxonomic–associative approach. A new graphic model named accident tree(AcciTree), with a two-mode structure and a reaction-based concept, is developed for accident modeling and safety defense identification. The AcciTree model is then integrated with the well-established human factors analysis and classification system(HFACS) to enhance both reliability of the graphic part and logicality of the taxonomic part for improving completeness of analysis. An associative hazard analysis technique is further put forward to extend analysis to factors outside accidents, to form extended safety requirements for proactive accident prevention. Two crash examples, a research flight demonstrator by our team and an industrial unmanned aircraft, illustrate that the integrated approach is effective for identifying more unsafe factors and safety requirements.     

环境压力对双组分运动液滴蒸发特征影响的理论研究

为获得亚临界条件下,环境压力对双组分运动液滴蒸发特性的影响规律,基于多组分液滴蒸发模型,对癸烷—乙醇二元混合液滴在高温氮气环境下的运动蒸发过程开展模型研究。通过模型计算,获得了液滴内部浓度分布、温度分布和液滴速度随时间的变化;分析了在环境压力0.1MPa和2MPa下,不同浓度液滴温度、尺寸及表面乙醇浓度的变化特征。结果表明:双组分液滴运动蒸发过程中,内部存在显著浓度和温度梯度,传热扩散快于传质扩散。常压环境下,液滴温度经历瞬态加热和平衡蒸发两个阶段,而高压环境下,液滴温度逐渐升高至接近环境温度。双组分液滴蒸发过程中由于组分浓度随时间变化,其无量纲尺寸随时间变化明显偏离"d 2理论";环境压力越高,液滴运动的贯穿距离越短,蒸发速率越慢。乙醇浓度对液滴蒸发速率的影响有两方面:蒸发前期,乙醇浓度越高,液滴蒸发速率越快;而蒸发后期,乙醇浓度越高,液滴蒸发速率反而越慢。     

基于FFT的抑制载波捕获技术

介绍三种基于快速傅里叶变换(FFT)的开环抑制载波捕获技术,并对这些算法进行性能分析及仿真.结果表明,基于FFT的交错符号积分技术,在低符号信噪比时引入的信噪比损失最小,适用于深空接收机中抑制载波捕获.     

基于神经网络的超精密车床圆柱度误差补偿技术研究

根据所研制的超精密亚微米车床的具体特点，提出了一种基于神经网络的工件圆柱度误差补偿方法，并据此建立了误差补偿控制系统，实验结果证明所提方法简单易行，在超精密车削中应用前景广阔。     

Dimension reduction for array processing with robust interference cancellation

We present a robust solution for data reduction in array processing. The purpose is to reduce the computation and improve the performance of applied signal processing algorithms by mapping the data into a lower dimension beamspace (BS) through a transformation. Nulls steering to interference are incorporated into a transformation using the subspace projection technique, and the BS spatial spectrum estimation accuracy is evaluated and maximized with a measure. The derived transformation tries to preserve the full-dimension Cramer-Rao bounds (CRBs) for the parameters of interest while rejecting undesired signals effectively. When compared with an optimal method and an adaptive approach, simulation results show that significant improvements are obtained in terms of BS direction-of-arrival (DOA) estimation root-mean-squared error (RMSE), bias, and resolution probability.